model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
104952 | Adjustable Under-Desk Power Brick Mount - Screwless | <h3>What is this?</h3><p>This is a simple multi-part design to hold a power adapter of various sizes under the desk. This design is meant to use with adhesive tape, though you could easily remix to add screw holes if you'd rather that. I use these to mount my multiple monitor power bricks.</p><p>Print 1x of the mount f... | [
"thingiverse"
] | Household > Office | [
"104952/images/image_1_compressed.jpg"
] | [
"104952/stls/UnderDeskPowerBrickCarriage.stl",
"104952/stls/UnderDeskPowerBrickCarriageVertical.stl",
"104952/stls/UnderDeskPowerBrickCarriageVertical_V1.1.stl",
"104952/stls/UnderDeskPowerBrickCarriage_V1.1.stl",
"104952/stls/UnderDeskPowerBrickMount.stl",
"104952/stls/UnderDeskPowerBrickMount_Cutout.stl... | CC-BY | https://www.printables.com/model/104952 | data_0001.tar |
224805 | Adjustable Vent Air Deflector | <p>Print each half to lie on its end so that no supports are required. When printed slide both halves together and adjust size. Side and back lips go under vent register so no magnets are required.</p> | [
"deflector",
"hvac",
"register"
] | Household > Other House Equipment | [
"224805/images/image_1_compressed.jpg"
] | [
"224805/stls/Left.stl",
"224805/stls/Right.stl"
] | CC-BY | https://www.printables.com/model/224805 | data_0001.tar |
175019 | Adjustable Wireless charging dock / Ikea Livboj / Powerwave / Anker / Nillkin | <p>This is a remix of my Anker charging pad dock. <a href="https://www.printables.com/de/model/134220">https://www.printables.com/de/model/134220</a></p><p> </p><p>This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally.</p><... | [
"ikea",
"wirelesscharger",
"phonestand",
"phone",
"qicharger",
"qiwirelesscharger",
"chargingstation",
"ikealivboj"
] | Gadgets > Portable Devices | [
"175019/images/image_1_compressed.jpg",
"175019/images/image_2_compressed.jpg"
] | [
"175019/stls/bracket.stl",
"175019/stls/IKEA Livboj charging dock.stl",
"175019/stls/Powerwave Charging dock.stl",
"175019/stls/Powerwave charging dock.stl"
] | CC-BY | https://www.printables.com/model/175019 | data_0001.tar |
27011 | Adjustable, oversized Y-axis | <p>Includes a beefed up Y-axis motor clamp, and a heavily reinforced Y-axis idler with adjustment.</p><p>This a remix of MattyVee's idler from <a href="https://www.thingiverse.com/thing:2786671">https://www.thingiverse.com/thing:2786671</a><br>(though I'm not sure there are any original parts left)</p><p>There's also a... | [
"idler",
"yaxis"
] | 3D Printers > Other Printer Parts & Upgrades | [
"27011/images/image_1_compressed.jpg",
"27011/images/image_2_compressed.jpg"
] | [
"27011/stls/base.stl",
"27011/stls/base10-wide.stl",
"27011/stls/buffed-y-axis.stl",
"27011/stls/Top.stl",
"27011/stls/washer.stl",
"27011/stls/Washers.stl"
] | CC-BY | https://www.printables.com/model/27011 | data_0001.tar |
789688 | Adjustable/lockable ball-joint phone holder for Prusa Connect camera | <p>Adjustable/lockable ball-joint phone holder for use as a camera mount for Prusa Connect. <br>Fits to any 3030 extrusion, without the need of any dismantling to expose the extrusion ends.</p><p>I made this for use with Prusa connect with my Prusa mini, but it should work with any 3030-extrusion. </p><p>It m... | [
"cameramount",
"adjustable",
"3030extrusion",
"prusamini",
"phoneholder",
"jointed",
"cameraholder",
"prusaconnect",
"prusaminiplus"
] | 3D Printers > Accessories | [
"789688/images/image_1_compressed.jpg",
"789688/images/image_10_compressed.jpg",
"789688/images/image_11_compressed.jpg",
"789688/images/image_12_compressed.jpg",
"789688/images/image_2_compressed.jpg",
"789688/images/image_3_compressed.jpg",
"789688/images/image_4_compressed.jpg",
"789688/images/imag... | [
"789688/stls/ball.stl",
"789688/stls/ball_v2.stl",
"789688/stls/extrusion_fixture_1.stl",
"789688/stls/extrusion_fixture_2.stl",
"789688/stls/extrusion_fixture_nut.stl",
"789688/stls/holder_bolt.stl",
"789688/stls/holder_bottom.stl",
"789688/stls/holder_nut.stl",
"789688/stls/holder_top.stl",
"789... | GPL3.0 | https://www.printables.com/model/789688 | data_0001.tar |
49629 | Adorable Cat | <p>Made the face cuter. Curled the tail around.</p>
<p>This is a remix of Makerbot's sitting cat: <a href="https://www.thingiverse.com/thing:30411">https://www.thingiverse.com/thing:30411</a></p> | [
"cat",
"cute",
"thingiverse",
"sittingcat"
] | Art & Design > Sculptures | [
"49629/images/image_1_compressed.jpg",
"49629/images/image_2_compressed.jpg",
"49629/images/image_3_compressed.jpg"
] | [
"49629/stls/adorable_cat.stl"
] | CC-BY | https://www.printables.com/model/49629 | data_0001.tar |
774346 | Adorable Filament Spool Keychain | <p>Express your love and passion for 3D printing with the “Adorable Filament Spool Keychain” – a cute, easy-to-print accessory that features an anthropomorphized spool of 3D printing filament with an adorable smile. It’s a perfect gift for yourself or anyone who enjoys 3D printing, capturing the fun and creativity of t... | [
"spool",
"3d",
"filament",
"cute",
"gift",
"customizable",
"easy",
"keychain",
"hobby",
"printing",
"simple",
"adorable"
] | Art & Design > Other Art & Designs | [
"774346/images/image_1_compressed.jpg"
] | [
"774346/stls/Filament Spool Keychain.stl"
] | CC-BY | https://www.printables.com/model/774346 | data_0001.tar |
767156 | Adorable Red Panda Keychain | <p>The "Adorable Red Panda Keychain" is a charming, easy-to-print accessory. With their distinctive reddish-brown fur, mischievous faces, and bushy tails, red pandas are beloved for their adorable appearance and playful antics. This keychain brings a piece of their enchanting world into your daily life.</p><p><strong>F... | [
"animal",
"cute",
"gift",
"red",
"easy",
"keychain",
"quick",
"panda",
"simple",
"adorable",
"colorful"
] | Art & Design > Other Art & Designs | [
"767156/images/image_1_compressed.jpg"
] | [
"767156/stls/Red Panda Keychain.stl"
] | CC-BY | https://www.printables.com/model/767156 | data_0001.tar |
21252 | Adorno nevera con imán - Emojis | <p>Adornos para nevera con la silueta de emojis o emoticones - con agujeros para dos imanes en la parte posterior.</p>
<h3>Print instructions</h3><p>Una vez impresos se deben fijar dos imanes : 2x5 mm.</p> | [
"kitchen",
"magnet",
"fridge",
"ornament",
"adorno",
"fridgemagnet",
"emoji",
"iman",
"nevecon",
"cocina",
"nevera",
"refrigerador",
"emoyi",
"refigerator",
"emoticon"
] | Household > Kitchen | [
"21252/images/image_1_compressed.jpg",
"21252/images/image_2_compressed.jpg"
] | [
"21252/stls/beso.stl",
"21252/stls/carita_feliz.stl",
"21252/stls/diablillo.stl",
"21252/stls/enamorado.stl",
"21252/stls/enfermo.stl",
"21252/stls/enojado.stl",
"21252/stls/llorar.stl"
] | CC-BY | https://www.printables.com/model/21252 | data_0001.tar |
832012 | ADSB Saw Filter + LNA housing | This is a little housing for the ADS-B filter that is commonly sold on Aliexpress and Amazon.
I used 2 wood screws that I had laying around to close the lid, but a M2 will work too. | [
"adsb",
"rtlsdr",
"sdr",
"1090",
"adsbexchange"
] | Unknown | [
"832012/images/image_1_compressed.jpg"
] | [
"832012/stls/case.stl",
"832012/stls/lid.stl"
] | GPL3.0 | https://www.printables.com/model/832012 | data_0001.tar |
284121 | Advanced Filtration System Add-on Printable Parts | <p>All printable parts for your <a href="https://help.prusa3d.com/guide/7-advanced-filtration-system-add-on_361946">Advanced Filtration System</a> Add-on.</p><p>You will also need <a href="https://www.printables.com/model/284120-basic-board-psu-add-on-printable-parts">Basic Board + PSU</a> Add-on, which is shipped auto... | [
"addon",
"originalprusaenclosure"
] | 3D Printers > Accessories | [
"284121/images/image_1_compressed.jpg",
"284121/images/image_2_compressed.jpg"
] | [
"284121/stls/Filter-bracket.stl"
] | GPL3.0 | https://www.printables.com/model/284121 | data_0001.tar |
840210 | Advanced Filtration System Adjustable Exhaust (v1 & v2) for the Original Prusa Enclosure | <p><strong>You might want to look at my recent </strong><a href="https://www.printables.com/model/964245-advanced-filtration-system-adjustable-exhaust-v3"><strong>Adjustable Exhaust v3</strong></a></p><p>Remixed the <a href="/model/284121-advanced-filtration-system-add-on-printable-parts"><strong>Advanced Filtration Sy... | [
"enclosure",
"exhaust",
"filtration"
] | 3D Printers > Prusa Parts & Upgrades | [
"840210/images/image_1_compressed.jpg",
"840210/images/image_2_compressed.jpg",
"840210/images/image_3_compressed.jpg",
"840210/images/image_4_compressed.jpg",
"840210/images/image_5_compressed.jpg"
] | [
"840210/stls/exhaust_cover.stl",
"840210/stls/exhaust_duct.stl",
"840210/stls/exhaust_selector.stl",
"840210/stls/v1_duct_seal.stl",
"840210/stls/v1_duct_seg1.stl",
"840210/stls/v1_duct_seg2.stl",
"840210/stls/v1_duct_seg3.stl",
"840210/stls/v1_duct_seg4.stl",
"840210/stls/v1_duct_seg5.stl",
"8402... | GPL3.0 | https://www.printables.com/model/840210 | data_0001.tar |
964245 | Advanced Filtration System Adjustable Exhaust (v3) for the Original Prusa Enclosure | <p>Remixed the <a href="/model/284121-advanced-filtration-system-add-on-printable-parts"><strong>Advanced Filtration System Add-on Printable Parts</strong></a> to add a ducting and exhaust system that can be easily oriented to redirect airflow into or out of the enclosure</p><h4><strong>Features</strong></h4><ul><li>Ea... | [
"enclosure",
"duct",
"exhaust"
] | 3D Printers > Prusa Parts & Upgrades | [
"964245/images/image_1_compressed.jpg"
] | [
"964245/stls/v3_duct_plate.stl",
"964245/stls/v3_duct_seg0.stl",
"964245/stls/v3_duct_seg1.stl",
"964245/stls/v3_duct_seg2.stl",
"964245/stls/v3_duct_seg3.stl",
"964245/stls/v3_duct_seg4.stl",
"964245/stls/v3_duct_seg5.stl",
"964245/stls/v3_duct_seg6.stl",
"964245/stls/v3_exhaust_cover.stl",
"9642... | GPL3.0 | https://www.printables.com/model/964245 | data_0001.tar |
401050 | Advanced Flow Calibration Test - Kalibrierung des Flusses | <p>English below!</p><h3>Eine fortschrittliche Methode zur Überprüfung der Durchflussgenauigkeit</h3><p>Hinweis: Es ist absolut richtig, dass die STL aus 2 Teilen besteht! Bitte einfach den Anweisungen folgen.</p><p>die Kurzanleitung zu dieser Vorgehensweise findest Du in diesem Video:</p><figure class="media"><oembed ... | [
"printer",
"test",
"calibration",
"dimensions",
"part",
"nozzle",
"torturetest",
"shape",
"3dprinter",
"firstlayercalibration",
"accuracy",
"tester",
"parts",
"prusaprinters",
"caliper",
"testprint",
"calibrationcube",
"calibrate",
"3dprinterparts",
"calibrationtest",
"printe... | 3D Printers > Test Models | [
"401050/images/image_1_compressed.jpg",
"401050/images/image_2_compressed.jpg"
] | [
"401050/stls/Flow check 3mm objekt.stl",
"401050/stls/Flow check 4mm objekt.stl",
"401050/stls/Flow check 5mm objekt.stl",
"401050/stls/Flow Test 10mm.stl",
"401050/stls/Flow Test 5mm.stl"
] | CC-BY | https://www.printables.com/model/401050 | data_0001.tar |
89944 | Advent calendar - eForce formula monopost | <h3>Christmas day </h3><h3>Steering wheel + BONUS</h3><p> </p><p>Check our models, you will find there Christmas bonus.</p><p> </p><h4>Stay in contact with us.</h4><p><strong>From 25.12. a special competition on facebook with a photos of formula prints</strong>.</p><p>Facebook: ... | [] | Toys & Games > Vehicles | [
"89944/images/image_1_compressed.jpg",
"89944/images/image_2_compressed.jpg",
"89944/images/image_3_compressed.jpg"
] | [
"89944/stls/01_monocoque_black_part.stl",
"89944/stls/01_monocoque_for_prusa_mini.stl",
"89944/stls/01_monocoque_orange_part.stl",
"89944/stls/01_monocoque_white_part.stl",
"89944/stls/01_Nose_conections_for_prusa_mini.stl",
"89944/stls/01_Nose_for_prusa_mini.stl",
"89944/stls/02_FA_UCA_right.stl",
"8... | CC0 | https://www.printables.com/model/89944 | data_0001.tar |
1092793 | ADVENT WREATH | Vločka jako věnec pro svíčky o pruměru max 39mm. | Download free 3D printable STL models | [] | Household > Home Decor | [
"1092793/images/image_1_compressed.jpg"
] | [
"1092793/stls/ADVENT.stl"
] | CC0 | https://www.printables.com/model/1092793 | data_0001.tar |
223795 | Adventure Force Dart Zone Nexus Pro Pump Grip | <p>Dart Zone (Adventure Force) Nexus Pro</p><p>shotgun-like pump foregrip</p><p>kinda a hybrid pump grip / angled foregrip</p><p>note, the roll bar up front is a thumb rest. meant to be held with thumb angled upwards like a 'traditional' rifle grip, not pointed downwards</p><p>I was not happy with the default vertical ... | [
"nerf",
"thingiverse",
"nerfmod",
"foregrip",
"nexuspro"
] | Toys & Games > Outdoor Toys | [
"223795/images/image_1_compressed.jpg",
"223795/images/image_2_compressed.jpg",
"223795/images/image_3_compressed.jpg",
"223795/images/image_4_compressed.jpg",
"223795/images/image_5_compressed.jpg"
] | [
"223795/stls/nexusPumpGrip.stl",
"223795/stls/nexusPumpGripCUT.stl",
"223795/stls/nexusPumpRailLeft.stl",
"223795/stls/nexusPumpRailRight.stl"
] | CC-BY | https://www.printables.com/model/223795 | data_0001.tar |
223798 | Adventure Force Dart Zone Nexus Pro / Max Stryker / MK3 Reduced Magazine Release | <p>A Shortened Magazine Release for the Nexus Pro, Max Stryker, and Dart Zone Pro MK3</p><p>When primarily using half-darts with the magwell adapter, the main magazine release is not used. So I reduced its size to get it out of my way.</p><p>prints without supports</p><p>UPDATE: now compatible with the Aeon Pro</p><p>U... | [
"nerf",
"thingiverse",
"nerfmod",
"nexuspro",
"adventureforce",
"dartzonenexuspro",
"dartzonepromk3",
"dartzonemaxstryker"
] | Toys & Games > Outdoor Toys | [
"223798/images/image_1_compressed.jpg"
] | [
"223798/stls/nexusMainMagRelease5.stl"
] | CC-BY | https://www.printables.com/model/223798 | data_0001.tar |
193175 | ADXL345 E3D V6 / DRAGON Nozzle Mount (Stealthburner compatible) | <p>I had to modify the mount, so that it gets slid on the heaterblock from underneath. The upcoming Stealthburner cooling solution for Voron hotends blocks the space needed for the original design to slide on the heaterblock from the front.</p><p>PETG is recommended to give some flex to the part. Print with supports ev... | [
"dragon",
"thingiverse",
"trianglelab",
"voron",
"adxl345",
"stealthburner"
] | 3D Printers > Accessories | [
"193175/images/image_1_compressed.jpg"
] | [
"193175/stls/SB_ADXL_CAP_Dragon_and_E3D_for_LID.stl"
] | GPL2.0 | https://www.printables.com/model/193175 | data_0001.tar |
228511 | ADXL345 Mount | [
"accelerometer",
"adxl345",
"adxl345mount"
] | 3D Printers > Other Printer Parts & Upgrades | [
"228511/images/image_1_compressed.jpg"
] | [
"228511/stls/ADXL345_Mount.stl"
] | CC0 | https://www.printables.com/model/228511 | data_0001.tar | |
1133791 | AD/HD Guitar Pick | <p>Unique guitar pick with AD/HD pattern that looks like AC/DC logo. The thickness of the tip is 0.8mm, the body of the pick is 1mm thick. The Pick is compatible with my pick holder for the Skadis board. (You can find it on my profile) I am not the author of the AD/HD design. If you want to Remix the model, there is al... | [
"pick",
"guitarpick",
"guitarpicks"
] | Hobby & Makers > Music | [
"1133791/images/image_1_compressed.jpg",
"1133791/images/image_2_compressed.jpg",
"1133791/images/image_3_compressed.jpg"
] | [
"1133791/stls/Guitar-pick-ADHD.stl"
] | GPL3.0 | https://www.printables.com/model/1133791 | data_0001.tar |
779552 | AEG Electrolux 8996470604712 Adjustable Tumble Dryer Foot | <p>AEG Electrolux 8996470604712 Condenser Tumble Dryer Foot</p><p><a href="https://shop.aeg.co.uk/laundry/tumble-dryers/feet-housing/adjustable-tumble-dryer-foot/p/8996470604712">Visit the AEG Store</a></p><p> </p><h3><strong>Print instructions</strong></h3><p>For optimal results, please adhere to the following re... | [
"feet",
"foot",
"dryer",
"electrolux",
"aeg",
"tumble",
"tumbledryer"
] | Household > Other House Equipment | [
"779552/images/image_1_compressed.jpg"
] | [
"779552/stls/AEG_Electrolux-8996470604712.stl"
] | CC0 | https://www.printables.com/model/779552 | data_0001.tar |
997564 | Aerated container for silica gel - Filament spool desiccator | <p><strong>50 mm diameter and 63 mm height </strong>for 1kg standard spool or for your sock drawer !</p><p>I created it basically to store my filament spools in the best way. I place the container inside spools to save space because I store my spools in waterproof food buckets (€8 each ! )</p><p>You will laugh but I th... | [
"desiccant",
"screwable",
"silicagel",
"dehydrator",
"silicagelcontainer"
] | 3D Printers > Accessories | [
"997564/images/image_1_compressed.jpg",
"997564/images/image_2_compressed.jpg",
"997564/images/image_3_compressed.jpg",
"997564/images/image_4_compressed.jpg",
"997564/images/image_5_compressed.jpg",
"997564/images/image_6_compressed.jpg"
] | [
"997564/stls/Spool_dehydrator_container_thin_V1.3--290924.stl",
"997564/stls/Spool_dehydrator_container_V1.1-140924.stl",
"997564/stls/Spool_dehydrator_lid_thin_V1.3--290924.stl",
"997564/stls/Spool_dehydrator_lid_V1.1-140924.stl"
] | CC-BY | https://www.printables.com/model/997564 | data_0001.tar |
105319 | Aerated Pi Zero/Pi Zero 2 Case | <p>I made this project beacuse there weren't cases enough ventilated for Raspberry Pi Zero and Pi Zero 2.</p><p>I made this simple and compact design.</p><p><strong>BOM</strong><br>4x M2x10 screws</p> | [
"2",
"raspberry",
"pi",
"zero",
"w"
] | 3D Printers > Other Printer Parts & Upgrades | [
"105319/images/image_1_compressed.jpg",
"105319/images/image_2_compressed.jpg",
"105319/images/image_3_compressed.jpg",
"105319/images/image_4_compressed.jpg",
"105319/images/image_5_compressed.jpg",
"105319/images/image_6_compressed.jpg",
"105319/images/image_7_compressed.jpg"
] | [
"105319/stls/bottom.stl",
"105319/stls/top.stl"
] | CC-BY | https://www.printables.com/model/105319 | data_0001.tar |
191349 | Aerator Remover Keys Tool |
<p>Appreciate the work of the original author, but found a few things I wanted.</p>
<ol>
<li><p>Original was overly large; these slim down a lot and remove all the wasted infill</p>
</li>
<li><p>The makers mark text made printing sub-optimal</p>
</li>
<li><p>I preferred the "wings" found on <a href="https://www.thin... | [
"tool",
"faucet",
"aerator",
"thingiverse"
] | Hobby & Makers > Tools | [
"191349/images/image_1_compressed.jpg",
"191349/images/image_2_compressed.jpg",
"191349/images/image_3_compressed.jpg",
"191349/images/image_4_compressed.jpg"
] | [
"191349/stls/M16.5_Tom_Thumb.stl",
"191349/stls/M18.5_Tiny_Junior.stl",
"191349/stls/M21.5_Junior.stl",
"191349/stls/M24_Regular.stl"
] | CC-BY | https://www.printables.com/model/191349 | data_0001.tar |
670443 | Aerial Salute Reloadable Mini Mortar Firework | <p>These have been working surprisingly well, and will be updated as better designs are tested.<br>Please use all safety steps you would normally take when handling any firework.</p><p>Test video of a 16mm and 20mm </p><figure class="media"><oembed url="https://youtu.be/A3vfXrKmMpk"></oembed></figure><p>Works well... | [
"fireworks",
"mortar",
"blackpowder",
"firecracker",
"firework",
"salute"
] | Gadgets > Other Gadgets | [
"670443/images/image_1_compressed.jpg",
"670443/images/image_10_compressed.jpg",
"670443/images/image_11_compressed.jpg",
"670443/images/image_12_compressed.jpg",
"670443/images/image_13_compressed.jpg",
"670443/images/image_2_compressed.jpg",
"670443/images/image_3_compressed.jpg",
"670443/images/ima... | [
"670443/stls/16mm Cap Tool.stl",
"670443/stls/16mm Double Break V1.stl",
"670443/stls/16mm Triple Shot, no delay.stl",
"670443/stls/16mm Tube Base.stl",
"670443/stls/16mm Tube, 3mm fuse.stl",
"670443/stls/19.8mm Shell, 14mm delay, 3mm fuse.stl",
"670443/stls/19.8mm Shell, 20mm delay, 3mm fuse.stl",
"6... | CC-BY | https://www.printables.com/model/670443 | data_0001.tar |
398443 | Aerogarden Cap Cover V1 | <p>A cap designed to cover Aerogarden empty pod holes.<br>It should prevent algae growth in the tank.</p><p>15-20% Cubic infill works well at 0.2mm later height.</p><p> </p><p><i>I will add print pics soon</i></p> | [
"hydroponics",
"aerogarden",
"aerogardencover",
"aerogardenplug"
] | Household > Outdoor & Garden | [
"398443/images/image_1_compressed.jpg"
] | [
"398443/stls/AG Cap.stl"
] | CC-BY | https://www.printables.com/model/398443 | data_0001.tar |
399846 | Aerogarden Plug | <p>I made this Aerogarden “plug” to use if you don't have plants for all of the holes in your Aerogarden, but want to keep plants in other slots. In my case, I had a plant die and didn't have anything fill the hole with.</p><p>I printed this in black PETG and it worked well. You'll want to use a dark color as part of t... | [
"aerogarden"
] | Household > Outdoor & Garden | [
"399846/images/image_1_compressed.jpg"
] | [
"399846/stls/aerogarden plug.stl"
] | CC-BY | https://www.printables.com/model/399846 | data_0001.tar |
620820 | Aeropress Coffee Scoop | <p>When I received my Aeropress coffee maker from a friend it was missing the scoop. </p> | [] | Household > Kitchen | [
"620820/images/image_1_compressed.jpg"
] | [
"620820/stls/Scoop v5.stl"
] | CC-BY | https://www.printables.com/model/620820 | data_0001.tar |
25598 | AeroPress extension | <p>Hi all,<br/>
I love coffee and for its prepare I use AeroPress. I take it with me almost anywhere. But problem is with paper filters. Where storage them? I made for this issue an extension, which you can put on the bayonet, on top of the AeroPress.</p>
<h3>Print instructions</h3><p>The extension is from 3 parts, al... | [
"press",
"coffee",
"aeropress",
"aero"
] | Household > Other House Equipment | [
"25598/images/image_1_compressed.jpg",
"25598/images/image_2_compressed.jpg",
"25598/images/image_3_compressed.jpg",
"25598/images/image_4_compressed.jpg",
"25598/images/image_5_compressed.jpg",
"25598/images/image_6_compressed.jpg",
"25598/images/image_7_compressed.jpg"
] | [
"25598/stls/bottom.stl",
"25598/stls/middle.stl",
"25598/stls/middlecircle.stl",
"25598/stls/middleclear.stl",
"25598/stls/top.stl"
] | CC-BY | https://www.printables.com/model/25598 | data_0001.tar |
134709 | Aeropress Filter Box Screw On Lid | <p>In need for a place for the filter pads of my AeroPress I designed this screw top container. The design is inspired by the AeroPress Design. It holds about 200 filters.</p><p>Printed with .4 mm nozzle at .2 mm layer height.</p> | [
"coffee",
"aeropress",
"thingiverse"
] | Household > Kitchen | [
"134709/images/image_1_compressed.jpg"
] | [
"134709/stls/aeropress_container.stl",
"134709/stls/aeropress_lid.stl"
] | CC-BY | https://www.printables.com/model/134709 | data_0001.tar |
294087 | AeroPress Filter Cover | <p>Wanted a simple cover and found the original but wanted it with the AeroPress logo.</p><p>Thingiverse remixed from link, <a href="https://www.thingiverse.com/thing:4742294">https://www.thingiverse.com/thing:4742294</a></p><p>Category: Kitchen & Dining</p> | [
"thingiverse"
] | Household > Kitchen | [
"294087/images/image_1_compressed.jpg",
"294087/images/image_2_compressed.jpg",
"294087/images/image_3_compressed.jpg"
] | [
"294087/stls/AeroPress Filter Cover v1.stl"
] | CC-BY | https://www.printables.com/model/294087 | data_0001.tar |
363501 | AeroPress filter dust cap | <p>Goes over the AeroPress filter holder. Matches the hexagonal aesthetic of the filter holder design. I always found it odd that there is no cover included.</p><p>I added some step and fusion files for making custom named designs.</p><p>Since the lid does not touch the filters, food safety of the material should not b... | [
"filter",
"container",
"aeropress"
] | Household > Kitchen | [
"363501/images/image_1_compressed.jpg",
"363501/images/image_2_compressed.jpg"
] | [
"363501/stls/FilterCover.stl",
"363501/stls/FilterCover_text.stl"
] | CC-BY | https://www.printables.com/model/363501 | data_0001.tar |
393722 | AeroPress Filter Holder w/ Logo | <p>Screw top Aeropress filter holder / storage container w/ AeroPress logo.</p>
<p>15mm base is big enough to hold the filters that ship with the AeroPress, 45mm also available for bigger storage.</p>
Category: Kitchen & Dining | [
"filter",
"coffee",
"aeropress",
"thingiverse",
"aeropressfilter",
"aeropressstorage",
"aeropressfiltercover"
] | Household > Kitchen | [
"393722/images/image_1_compressed.jpg",
"393722/images/image_2_compressed.jpg",
"393722/images/image_3_compressed.jpg",
"393722/images/image_4_compressed.jpg",
"393722/images/image_5_compressed.jpg",
"393722/images/image_6_compressed.jpg"
] | [
"393722/stls/Aeropress_container_15_mm.stl",
"393722/stls/Aeropress_container_45_mm.stl",
"393722/stls/Aeropress_Logo_Cap.stl"
] | CC-BY | https://www.printables.com/model/393722 | data_0001.tar |
551665 | Aeropress Wrench | <p>A little tool to help removing an overtightened filter holder, or just to be used on a regular basis.<br><br>Print settings (~1h 25m):<br>- no support<br>- with a 0.4 nozzle<br>- set to 0.6 line width<br>- 0.28 line height<br>- 2 walls<br>- 100% infill (/20% cubic for a 1h print)<br>- printed upside down<br>- a bit ... | [
"aeropress"
] | Household > Kitchen | [
"551665/images/image_1_compressed.jpg",
"551665/images/image_2_compressed.jpg"
] | [
"551665/stls/Aeropress Wrench V3.stl"
] | CC-BY | https://www.printables.com/model/551665 | data_0001.tar |
53750 | Affiche PRUSA MMU2S | <p>J'ai trouvé cette affiche extrêmement stylé. Ayant le système MMU2S, j'ai retravaillé cette affiche PRUSA pour pouvoir l'imprimer en multi-couleur. Le résultat est excellent.</p>
<h3>Print instructions</h3><p>PLA<br/>
9 heures d'impression<br/>
MMU2S<br/>
15% de remplissage</p> | [] | Art & Design > 2D Plates & Logos | [
"53750/images/image_1_compressed.jpg",
"53750/images/image_2_compressed.jpg",
"53750/images/image_3_compressed.jpg"
] | [
"53750/stls/assemblage-affiche-prusa-v3.stl"
] | CC0 | https://www.printables.com/model/53750 | data_0001.tar |
54545 | Afterbearner the Prusa Bear Afterburner (StealthBearner now) | <p>Update: Dual Y motors printing @ 500mm/s</p><p>Extra motor to compensate for bed wight using de Z driver slot and sending more current, files in folder Dual Y motors upgrade, careful my printer its longer in Y than the normal size, that's how I can fit more stuff. The parts are mirrored from the one in the video so ... | [] | 3D Printers > Prusa Parts & Upgrades | [
"54545/images/image_1_compressed.jpg",
"54545/images/image_10_compressed.jpg",
"54545/images/image_11_compressed.jpg",
"54545/images/image_12_compressed.jpg",
"54545/images/image_13_compressed.jpg",
"54545/images/image_14_compressed.jpg",
"54545/images/image_15_compressed.jpg",
"54545/images/image_16_... | [
"54545/stls/2x2_Y_Moto_v2_p1.stl",
"54545/stls/2x2_Y_Moto_v2_p2.stl",
"54545/stls/beltclip.stl",
"54545/stls/beltlid.stl",
"54545/stls/BeltLid_v2.stl",
"54545/stls/Bowden_FS_Longv2.stl",
"54545/stls/CablecoverTOP.stl",
"54545/stls/cable_guide_back v2.stl",
"54545/stls/cable_guide_back-v1.stl",
"54... | GPL3.0 | https://www.printables.com/model/54545 | data_0001.tar |
141887 | Age of Empires II Britons Town Center | <p>The Britons castle age town center from AoE 2.</p><p>The original sprite doesn't show the entire story in terms of first ground props, so I've partially gone by the sprite, and partially positioned them to make everything connected together. Lots of barrels and boxes and bricks and such.</p><h3>Print Settings</h3><p... | [
"building",
"thingiverse",
"ageofempires2",
"ageofempires",
"aoe2",
"towncenter"
] | World & Scans > Architecture & Urbanism | [
"141887/images/image_1_compressed.jpg",
"141887/images/image_2_compressed.jpg",
"141887/images/image_3_compressed.jpg",
"141887/images/image_4_compressed.jpg",
"141887/images/image_5_compressed.jpg",
"141887/images/image_6_compressed.jpg",
"141887/images/image_7_compressed.jpg",
"141887/images/image_8... | [
"141887/stls/towncenter2.stl",
"141887/stls/towncenter2_bottom.stl",
"141887/stls/towncenter2_top.stl"
] | CC-BY | https://www.printables.com/model/141887 | data_0002.tar |
542391 | Ahava - Love - אהבה | Model of the ＂Ahava＂ (Love) sculpture at the Israel Museum in Jerusalem | Download free 3D printable STL models | [
"sculpture",
"love",
"jewish",
"judaica",
"israel",
"jerusalem",
"hebrew",
"ahava"
] | Art & Design > Sculptures | [
"542391/images/image_1_compressed.jpg"
] | [
"542391/stls/ahava.stl"
] | CC0 | https://www.printables.com/model/542391 | data_0002.tar |
83754 | Ahiru Duck (rubber duck) |
<p>Design to use TPU 95 filament.</p>
<p>In Cura set the infill to 10%, pattern to concentric, outer walls to 3. To get a more rubbery duck</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3</p></div><stron... | [
"thingiverse",
"duck",
"ducky",
"rubberducky"
] | Toys & Games > Action Figures & Statues | [
"83754/images/image_1_compressed.jpg",
"83754/images/image_2_compressed.jpg",
"83754/images/image_3_compressed.jpg",
"83754/images/image_4_compressed.jpg"
] | [
"83754/stls/Ahiru_duck.stl"
] | CC-BY | https://www.printables.com/model/83754 | data_0002.tar |
360798 | Ahri KDA - League of Legends - 25cm tall model |
<p>K/DA exploded into the music scene with their hit song “POP/STARS.” Fans of K/DA can’t get enough of their unconventional flair, from the trademark tails (which fans suspect are real) to otherworldly decor in their studio. “Our songs are for you to remember—-always be true to yourself,” says lead singer Ahri. K/D... | [
"fanart",
"cute",
"model",
"girl",
"female",
"fox",
"thingiverse",
"dancer",
"sexy",
"foxgirl",
"akali",
"kda",
"kdaahri",
"kdaakali",
"ahri"
] | Art & Design > Sculptures | [
"360798/images/image_1_compressed.jpg",
"360798/images/image_10_compressed.jpg",
"360798/images/image_11_compressed.jpg",
"360798/images/image_12_compressed.jpg",
"360798/images/image_13_compressed.jpg",
"360798/images/image_14_compressed.jpg",
"360798/images/image_15_compressed.jpg",
"360798/images/i... | [
"360798/stls/Ahri_KDA_-_9_Tails.stl",
"360798/stls/Ahri_KDA_-_Base.stl",
"360798/stls/Ahri_KDA_-_Full.stl",
"360798/stls/Ahri_KDA_-_Full_no_base.stl",
"360798/stls/Ahri_KDA_-_Full_no_base_-_9_tailed.stl",
"360798/stls/Ahri_KDA_-_Hips.stl",
"360798/stls/Ahri_KDA_-_LArm.stl",
"360798/stls/Ahri_KDA_-_LLe... | CC-BY | https://www.printables.com/model/360798 | data_0002.tar |
421312 | Ahsoka Tano's Lightsabers - Star Wars The Mandalorian | <p>Here is my version of Ahsoka Tano's lightsabers from her live action debut in Star Wars The Mandalorian. These were based on reference photos of behind the scenes props and screen captures.</p><p>The colors are interesting--the offhand body is supposed to be a darker silver with a silver emitter dish, while the main... | [
"starwars",
"light",
"cosplay",
"prop",
"star",
"wars",
"jedi",
"sabre",
"saber",
"lightsabre",
"asoka",
"asohka"
] | Costumes & Accessories > Props | [
"421312/images/image_1_compressed.jpg",
"421312/images/image_2_compressed.jpg",
"421312/images/image_3_compressed.jpg",
"421312/images/image_4_compressed.jpg",
"421312/images/image_5_compressed.jpg",
"421312/images/image_6_compressed.jpg"
] | [
"421312/stls/Ahsoka Tano Lightsabers - 10__Activator_Button_-_black.stl",
"421312/stls/Ahsoka Tano Lightsabers - 11__Rivet x4 - silver.stl",
"421312/stls/Ahsoka Tano Lightsabers - 12__Emitter_Band_-_gray.stl",
"421312/stls/Ahsoka Tano Lightsabers - 13__Emitter_Case_-_silver_or_dark_silver.stl",
"421312/stls... | CC-BY | https://www.printables.com/model/421312 | data_0002.tar |
483717 | AI-Generated Low-Poly Cat | <p>This is a simple low-poly cat I generated in Kaedim, an AI image-to-3D model service, using an AI-generated image from Midjourney.</p><p>I edited it slightly in Meshmixer to make it more printable and get rid of some of the weird artifacts in the original model. Take a look at the original to see the difference:</p>... | [
"ai",
"generative",
"generated",
"gd",
"midjourney",
"kaedim",
"imageto3d"
] | World & Scans > Animals | [
"483717/images/image_1_compressed.jpg",
"483717/images/image_2_compressed.jpg"
] | [
"483717/stls/KaedimCat (60mm).stl",
"483717/stls/KaedimCat.stl",
"483717/stls/low-poly cat sitting.stl"
] | GPL3.0 | https://www.printables.com/model/483717 | data_0002.tar |
724216 | AIM-9L Sidewinder 1:8 scale | <h3>AIM-9L Sidewinder</h3><p>I wanted a good replica of a sidewinder, but could not find any. So I made one. Its based off some very bad drawings so some measurements might be slightly off. </p><p>The model is split into logical parts for easy printing.</p><p>I found 1:8 scale to be the best for preserving detail ... | [
"rocket",
"model",
"scale",
"infrared",
"scalemodel",
"fighterjet",
"sidewinder",
"missile",
"aim",
"aim9",
"missiles",
"heatseeker"
] | Art & Design > Other Art & Designs | [
"724216/images/image_1_compressed.jpg",
"724216/images/image_2_compressed.jpg",
"724216/images/image_3_compressed.jpg",
"724216/images/image_4_compressed.jpg",
"724216/images/image_5_compressed.jpg",
"724216/images/image_6_compressed.jpg",
"724216/images/image_7_compressed.jpg"
] | [
"724216/stls/AIM-9L - Nose.stl",
"724216/stls/AIM-9L - Nose back.stl",
"724216/stls/AIM-9L - Nozzle.stl",
"724216/stls/AIM-9L - Proxysensor.stl",
"724216/stls/AIM-9L - Roleron.stl",
"724216/stls/AIM-9L - Seeker.stl",
"724216/stls/AIM-9L - Seekerplate.stl",
"724216/stls/AIM-9L - Tail.stl",
"724216/s... | CC-BY | https://www.printables.com/model/724216 | data_0002.tar |
894224 | AIO spacer 5mm NZXT | <p>Just a simple logo swap from Corsair ship logo to NZXT text logo.</p> | [
"spacer",
"aio",
"nzxtkraken"
] | Gadgets > Computers | [
"894224/images/image_1_compressed.jpg"
] | [
"894224/stls/AIO radiator comb 5mm NZXT.stl"
] | CC-BY | https://www.printables.com/model/894224 | data_0002.tar |
713555 | AIOC enclosure | <p>Snap-fit enclosure by SP5CMD</p> | [
"enclosure",
"hamradio"
] | Hobby & Makers > Electronics | [
"713555/images/image_1_compressed.jpg",
"713555/images/image_2_compressed.jpg"
] | [
"713555/stls/aioc-alternative-top-no-holes.stl",
"713555/stls/aioc.stl"
] | CC0 | https://www.printables.com/model/713555 | data_0002.tar |
412274 | Air conditioner exhaust into the ventilation window | <p>Air conditioner exhaust into the ventilation window.</p>
<p>Výdech klimatizace do okna ventilace.</p>
Category: Household | [
"thingiverse"
] | Household > Other House Equipment | [
"412274/images/image_1_compressed.jpg",
"412274/images/image_2_compressed.jpg"
] | [
"412274/stls/Klima.stl"
] | CC-BY | https://www.printables.com/model/412274 | data_0002.tar |
232685 | Air Duct for part cooling on Mini+ | <p>The part uses the Nozzle Cooling fan to better cool the printed part than the original design. Cools print from both sides to create better overhangs, bridges, etc. The part should be printed with support on the bed.</p><p>The design is mounted directly on the print head's fan without having to remove or adjust any ... | [
"airflow",
"coolingduct",
"originalprusamini"
] | 3D Printers > Other Printer Parts & Upgrades | [
"232685/images/image_1_compressed.jpg",
"232685/images/image_2_compressed.jpg",
"232685/images/image_3_compressed.jpg"
] | [
"232685/stls/AirDuct.stl"
] | CC-BY | https://www.printables.com/model/232685 | data_0002.tar |
20525 | Air Elemental Updated | <p>Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a href="https://www.patreon.com/mz4250">https://www.patreon.com/mz4250</a></p>
<p>Patrons have access to all my files in one place, a reque... | [
"air",
"dungeonsanddragons",
"elemental"
] | Toys & Games > Action Figures & Statues | [
"20525/images/image_1_compressed.jpg"
] | [
"20525/stls/air-elemental-updated.stl"
] | CC-BY | https://www.printables.com/model/20525 | data_0002.tar |
669950 | air flow flow slider riser | Added and hexagon texture with slide adjustable ventilation. | [
"lid",
"creality",
"k1"
] | 3D Printers > Creality Parts & Upgrades | [
"669950/images/image_1_compressed.jpg",
"669950/images/image_2_compressed.jpg",
"669950/images/image_3_compressed.jpg"
] | [
"669950/stls/riser side rear.stl",
"669950/stls/riser side vented slider.stl",
"669950/stls/riser side vented.stl"
] | CC-BY | https://www.printables.com/model/669950 | data_0002.tar |
22097 | Air Inlet MK3 | <p>Air inlet for Prusa MK3 and MK3S (MK3 needs a longer screw, M3x20)</p>
<h3>Print instructions</h3><p>Just print without support and in PETG/ASA/ABS and enjoy.</p> | [
"air",
"fan",
"inlet",
"faninlet"
] | 3D Printers > Prusa Parts & Upgrades | [
"22097/images/image_1_compressed.jpg"
] | [
"22097/stls/air_inlet_mk3.stl"
] | CC0 | https://www.printables.com/model/22097 | data_0002.tar |
126147 | Air Jordan I pen holder |
<p>Nike Air Jordan IV pen holder remixed from benben0115 model</p>
<p>This is a remix from <a href="https://www.thingiverse.com/thing:398515">https://www.thingiverse.com/thing:398515</a></p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p><p class="detail-setting printer"><strong>P... | [
"art",
"sneakers",
"penholder",
"pencilholder",
"thingiverse",
"nba",
"basketball",
"nike",
"sneaker",
"jordan"
] | Household > Office | [
"126147/images/image_1_compressed.jpg"
] | [
"126147/stls/jordan_1_penholder.stl"
] | CC-BY | https://www.printables.com/model/126147 | data_0002.tar |
126145 | Air Jordan IV pen holder |
<p>Nike Air Jordan IV pen holder remixed from benben0115 model</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3 Pro</p></div><strong>Rafts:</strong></p>
<p>No</p>
<p><p class="detail-setting supports"><... | [
"art",
"penholder",
"pencilholder",
"thingiverse",
"basketball",
"nike",
"airjordan",
"jordan"
] | Household > Office | [
"126145/images/image_1_compressed.jpg"
] | [
"126145/stls/joradn_iv_pen_holder.stl"
] | CC-BY | https://www.printables.com/model/126145 | data_0002.tar |
382268 | Air Jordan Logo | Air Jordan logo in 3D.
5mm high. | Download free 3D printable STL models | [
"logo",
"air",
"3dlogo",
"nike",
"airjordan",
"jordan",
"toxicmaxi"
] | Art & Design > 2D Plates & Logos | [
"382268/images/image_1_compressed.jpg",
"382268/images/image_2_compressed.jpg"
] | [
"382268/stls/Jordan.stl"
] | CC0 | https://www.printables.com/model/382268 | data_0002.tar |
206527 | Air lock for brewery and fermentation | <p>11 mm stock. Fill with around 30 ml of water. No supports needed.</p> | [
"fermentation",
"airlock",
"brewery",
"waterlock"
] | Household > Kitchen | [
"206527/images/image_1_compressed.jpg",
"206527/images/image_2_compressed.jpg"
] | [
"206527/stls/waterLock.stl",
"206527/stls/waterLockCap.stl"
] | CC0 | https://www.printables.com/model/206527 | data_0002.tar |
654508 | Air Plane Luggage Tag | <p>Recommended to print the main body of the Tag in a luminescent / bright color, so you can easily spot it. </p><p>The two parts have self aligning studs. Although its a friction fit, I recommend to add some CA glue.</p><p>Recommended Materials: PLA / PLA+</p><p>Settings: Standard Settings for PLA / PLA+ </p... | [
"tag",
"airplane",
"luggage"
] | Fashion > Other Fashion Accessories | [
"654508/images/image_1_compressed.jpg"
] | [
"654508/stls/LT-main-body.stl",
"654508/stls/LT-top-cover.stl"
] | CC0 | https://www.printables.com/model/654508 | data_0002.tar |
119673 | Air pressure balloon adapter | <p>If you want to use an air pressure device to inflate balloons, this is the perfect adapter.<br>It fits any tire air pressure inflater, on the other end there are 3 different diameters for different sizes of balloon.</p><p>I've printed with brim and support to be sure it will not fall or move during the print process... | [
"adapter",
"adaptor",
"balloon"
] | Hobby & Makers > Tools | [
"119673/images/image_1_compressed.jpg",
"119673/images/image_2_compressed.jpg",
"119673/images/image_3_compressed.jpg"
] | [
"119673/stls/balloonAirpressureAdaptor_v5.stl"
] | CC0 | https://www.printables.com/model/119673 | data_0002.tar |
1076641 | Air Pressure Tank | <p>This is a tank toy that use air pressure to fire a bullet.</p> | [] | Hobby & Makers > Other Ideas | [
"1076641/images/image_1_compressed.jpg"
] | [
"1076641/stls/base.stl",
"1076641/stls/bullet.stl",
"1076641/stls/gun.stl",
"1076641/stls/head.stl",
"1076641/stls/spring.stl"
] | CC0 | https://www.printables.com/model/1076641 | data_0002.tar |
1066385 | Air Scroop BMW F30 | <p>Air Scoop for a range of different BMW's. Fits right inside the grill, there is a little door which leads straight to the base of the standard intake. This scoop aims more colder air towards that intake tunnel. Therefore lowering the intake air temperature. This is a fairly easy modification to install. The scoop co... | [] | Hobby & Makers > Automotive | [
"1066385/images/image_1_compressed.jpg",
"1066385/images/image_2_compressed.jpg"
] | [
"1066385/stls/AirscoopbmwF30.stl"
] | CC0 | https://www.printables.com/model/1066385 | data_0002.tar |
518520 | Air Spinner by walter | <p>Air Spinner by walter on <a href="https://www.thingiverse.com/thing:2823006">Thingiverse</a>: https://www.thingiverse.com/thing:2823006</p><p>This is model is provided as a default within Snapmaker's Luban slicer when your Snapmaker has the dual printing module. I printed in a few different sizes using the filaments... | [
"spinner",
"spinning",
"gyroscope",
"spinnertoy",
"gyroscopic",
"gyroscopekeychain",
"spinningtoy",
"spinningring",
"spinningdisplay",
"gyrorings"
] | Toys & Games > Other Toys & Games | [
"518520/images/image_1_compressed.jpg",
"518520/images/image_2_compressed.jpg",
"518520/images/image_3_compressed.jpg",
"518520/images/image_4_compressed.jpg",
"518520/images/image_5_compressed.jpg",
"518520/images/image_6_compressed.jpg"
] | [
"518520/stls/Air Spinner.Hollow.stl",
"518520/stls/Air Spinner.Solid.stl"
] | CC0 | https://www.printables.com/model/518520 | data_0002.tar |
191858 | Air Spinner Gyro | <p>0.2mm layer height</p><p>%10 infill</p><p>3 top and bottom layers</p><p>0.4mm nozzle</p> | [
"spinner",
"fidget",
"air",
"fidgetspinner",
"spinnertoy",
"airspinner"
] | Toys & Games > Other Toys & Games | [
"191858/images/image_1_compressed.jpg"
] | [
"191858/stls/Air_Spinner_2_-_Solid.stl"
] | CC0 | https://www.printables.com/model/191858 | data_0002.tar |
154403 | Air Stone for Aquarium or Hydroponics | <p>I made this Airstone. It works by altering small arcs, thus creating little holes. I used some 2 cent coins to weigh it down enough so it will sink to the bottom. However, you may get away with printing it at 100 % infill, as both PLA and PETG are denser than water (I did not test this though). </p><p>I designe... | [
"stone",
"aquarium",
"air",
"aquaponics",
"hydroponics",
"sparge",
"airstone",
"sparger",
"sparing"
] | Household > Outdoor & Garden | [
"154403/images/image_1_compressed.jpg",
"154403/images/image_2_compressed.jpg"
] | [
"154403/stls/air stone wider opening hollow.stl",
"154403/stls/air stone wider opening solid.stl",
"154403/stls/airstone_hollow.stl",
"154403/stls/airstone_solid.stl"
] | CC-BY | https://www.printables.com/model/154403 | data_0002.tar |
783642 | Air System / Ventilation - Check Valve / Flap for 100mm / 4inch | <p>Another thing that came out of my ventilation system for my 3d printer setup. I needed a check valve that prevents air from the outside to come in while letting air be pushed through from the inside. I tested some off the shelf stuff but could not find a flap that opened up on low air pressure.</p><p>I attached two ... | [
"air",
"valve",
"system",
"flap"
] | Hobby & Makers > Mechanical Parts | [
"783642/images/image_1_compressed.jpg",
"783642/images/image_2_compressed.jpg",
"783642/images/image_3_compressed.jpg",
"783642/images/image_4_compressed.jpg"
] | [
"783642/stls/Feder neu dünn.stl",
"783642/stls/Feder normal.stl",
"783642/stls/Klapennhalter.stl",
"783642/stls/Klappe Bottom.stl",
"783642/stls/Klappe Top.stl",
"783642/stls/Klappe.stl"
] | CC-BY | https://www.printables.com/model/783642 | data_0002.tar |
462344 | Air tag case | <p>Air tag case</p>
<h3>Print Settings</h3>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting supports"><strong>Supports: </strong>
<div><p>No</p></div>
<p><strong>Resolution:</strong></p>
<p>0.2mm</p>
<p class="detail-setting infill"><strong>Infill: </strong>
<div><p>30%</p></div>
<p><strong>Filament:<... | [
"thingiverse",
"airtag"
] | Gadgets > Other Gadgets | [
"462344/images/image_1_compressed.jpg",
"462344/images/image_2_compressed.jpg"
] | [
"462344/stls/AirTagCase.stl"
] | CC-BY | https://www.printables.com/model/462344 | data_0002.tar |
43638 | Air vent for a 45 mm pipe (parametric) | <p>Air vent (grille) for a 45 mm pipe.</p>
<p>Parametric design in OpenScad, can be adapted to other dimensions.</p>
<h3>Print instructions</h3><h3>Category: Other Summary</h3>
<p>Air vent (grille) for a 45 mm pipe.</p>
<p>Parametric design in OpenScad, can be adapted to other dimensions.</p>
<h3> Print Settings</h3>
<... | [
"thingiverse"
] | Household > Other House Equipment | [
"43638/images/image_1_compressed.jpg",
"43638/images/image_2_compressed.jpg"
] | [
"43638/stls/air_vent.stl"
] | CC-BY | https://www.printables.com/model/43638 | data_0002.tar |
570661 | Air-up Pod-Box | <p>Achse wird nur über in die inlays gesteckt und raste dann im cover ein ohne kleben oder schrauben. Inlay benötigt man 4 mal. Achse idealer weise liegend drucken um höhere Stabilität zu bekommen</p> | [
"box",
"aufbewahrung",
"aufbewahrungsbox",
"pods",
"airup",
"trinken",
"airuppods"
] | Household > Other House Equipment | [
"570661/images/image_1_compressed.jpg",
"570661/images/image_2_compressed.jpg",
"570661/images/image_3_compressed.jpg",
"570661/images/image_4_compressed.jpg",
"570661/images/image_5_compressed.jpg",
"570661/images/image_6_compressed.jpg",
"570661/images/image_7_compressed.jpg"
] | [
"570661/stls/achse.stl",
"570661/stls/cover.stl",
"570661/stls/inlay.stl"
] | CC-BY | https://www.printables.com/model/570661 | data_0002.tar |
1089743 | Air65/Air75 canopy tilt extension | <p>This tiny bit of plastic lets you decrease the tilt you can apply to the camera on the Air65 and Air75. This lets you fly slower and still see straight ahead. Weights under 0.1g, which is probably less than most of the other solutions like longer screws and zip ties. I printed mine in eSUN PETG+ and its lasted... | [
"drone",
"air65"
] | Hobby & Makers > RC & Robotics | [
"1089743/images/image_1_compressed.jpg"
] | [
"1089743/stls/Air65_CanopyTiltExtender V6.stl",
"1089743/stls/CanopyTiltExtender_more_tilt.stl"
] | GPL3.0 | https://www.printables.com/model/1089743 | data_0002.tar |
268293 | Airbrush and Painting Turntable | <p>You just need to glue the Ballbearing outer Ring into the Turntable Part and the Bottom Part into the inner Ring of the Bearing. The Turntable has multiple 3mm Holes to put some sticks with parts you want to dry after painting. Also it has a Pattern of Hex Polys to reduce the surface of the painted Thing for better ... | [
"paint",
"painting",
"airbrush",
"turntable",
"miniatures"
] | Hobby & Makers > Other Ideas | [
"268293/images/image_1_compressed.jpg"
] | [
"268293/stls/Adapter 15 auf 19 v2.stl",
"268293/stls/Adapter 15 auf 19.stl",
"268293/stls/Bottom.stl",
"268293/stls/Turntable.stl"
] | CC0 | https://www.printables.com/model/268293 | data_0002.tar |
198883 | Airbrush backflow cleaning cap, Reinigungskappe | <p> </p><p>The Harder and Steenbeck Ultra Airbrush nozzle has holes on the sides, therefore it is almost impossible to create a backflow for cleaning or mixing colors.</p><p>There is an H&S Cleaning cap (127990), Reinigungskappe in German, but the shipping cost ist too high, so I made my own.</p><p>I used TPU ... | [
"airbrush",
"thingiverse",
"cleaningtools",
"backflow",
"fensterreiniger"
] | Hobby & Makers > Tools | [
"198883/images/image_1_compressed.jpg",
"198883/images/image_2_compressed.jpg"
] | [
"198883/stls/Airbrush_cleaning_cap_Fineliner.stl",
"198883/stls/Airbrush_cleaning_cap_Ultra.stl"
] | CC-BY | https://www.printables.com/model/198883 | data_0002.tar |
211730 | Airbrush Cleaning Attatchment for Mason Jar | <p>Created a model for a airbrush cleaning jar lid instead of purchasing a cleaning jar separately. You can use whatever you like for the reusable filters and add a lid.</p> | [
"lid",
"cleaning",
"tools",
"accessories",
"paint",
"painting",
"airbrush",
"jar",
"useful",
"cleaner",
"mason"
] | Hobby & Makers > Tools | [
"211730/images/image_1_compressed.jpg",
"211730/images/image_2_compressed.jpg",
"211730/images/image_3_compressed.jpg"
] | [
"211730/stls/Airbrush Cleaner Lid v1.stl"
] | CC0 | https://www.printables.com/model/211730 | data_0002.tar |
539627 | Airbrush Cleaning Pot | <p>Could not find a pot that was heavy enough and stable enough for my workspace. So Fusion to the rescue. </p><p>Made it as easy to print as possible with no supports. </p><h4>Print Settings</h4><p>4 bottom layers</p><p>3 top layers</p><p>3 perimeters</p><p>Printed with both a 0.4mm and 0.6mm hot-end success... | [
"airbrush",
"airbrushstand",
"airbrushcleaner",
"airbrushbottle",
"airbrushing",
"airbrushholder"
] | Art & Design > Other Art & Designs | [
"539627/images/image_1_compressed.jpg",
"539627/images/image_2_compressed.jpg",
"539627/images/image_3_compressed.jpg",
"539627/images/image_4_compressed.jpg",
"539627/images/image_5_compressed.jpg",
"539627/images/image_6_compressed.jpg"
] | [
"539627/stls/Air Filter Basket.stl",
"539627/stls/Airbrush Holder.stl",
"539627/stls/Bottle.stl",
"539627/stls/Lid.stl"
] | GPL3.0 | https://www.printables.com/model/539627 | data_0002.tar |
146175 | Airbrush Cleaning Pot/Stand for Mason Jar | <figure class="media"><oembed url="https://youtube.com/shorts/xS-Vcc1IfjM?si=goVl3O_yNVm1IqmT"></oembed></figure><p><br>Airbrush Cleaning Pot/Stand for Mason Jar</p> | [
"masonjar",
"masonjarairbrush"
] | Hobby & Makers > Other Ideas | [
"146175/images/image_1_compressed.jpg",
"146175/images/image_2_compressed.jpg",
"146175/images/image_3_compressed.jpg"
] | [
"146175/stls/Airbrush Cleaning PotStand for Mason Jar.stl",
"146175/stls/paint jar cap.stl"
] | CC-BY | https://www.printables.com/model/146175 | data_0002.tar |
637997 | Airbrush cyclone | <p>This is a rework of my own model from thingiverse (from 2012).</p><p>“cyclone to catch the spray while purging/cleaning an airbrush.”</p><p>There may be some sputtering especially with airbrush nozzles bigger than 0.2mm.</p><p>Prints without supports, a filament/profile with no stringing is recommended. There is now... | [
"airbrush",
"cyclone"
] | Art & Design > Other Art & Designs | [
"637997/images/image_1_compressed.jpg",
"637997/images/image_2_compressed.jpg",
"637997/images/image_3_compressed.jpg"
] | [
"637997/stls/cyclone.stl",
"637997/stls/cyclone_2.1.stl"
] | CC-BY | https://www.printables.com/model/637997 | data_0002.tar |
523671 | Airbrush desk clamp | <p>This is a remix of patprints verion of his desk clamp + the airbrush stand from BlackDemonStudio.</p><p>The main reason why I made this model (2 variations) is because the BlackDemonStudio airbrush holder would slip a lot if you don't put some anti-slip under it and I would like a solid one that doesn't move with th... | [
"desk",
"clamp",
"airbrush"
] | Hobby & Makers > Other Ideas | [
"523671/images/image_1_compressed.jpg"
] | [
"523671/stls/clamp_airbrush.stl",
"523671/stls/clamp_fullmodel.stl",
"523671/stls/clamp_main.stl",
"523671/stls/clamp_screw.stl"
] | CC-BY | https://www.printables.com/model/523671 | data_0002.tar |
46516 | Airbrush Freehand stencil | <p>A stencil/Template for airbrushing</p>
<h3>Print instructions</h3><h3>Category: Art Tools Summary</h3>
<p>A stencil/Template for airbrushing</p>
<h3> Print Settings</h3>
<p><strong>Printer:</strong> Da Vinci 1.0A e3d v6 repetier</p>
<p><strong>Rafts:</strong> No</p>
<p><strong>Supports:</strong> No</p>
<p><strong>Re... | [
"airbrush",
"stencil",
"template",
"thingiverse"
] | Hobby & Makers > Tools | [
"46516/images/image_1_compressed.jpg",
"46516/images/image_2_compressed.jpg",
"46516/images/image_3_compressed.jpg"
] | [
"46516/stls/freehand_stencil.stl"
] | CC-BY | https://www.printables.com/model/46516 | data_0002.tar |
152273 | airbrush holder | <p>clamp on desk airbrush holder suits my ebay airbrush , 12 to 38 mm gap for desk</p> | [
"air",
"brush",
"paint"
] | Hobby & Makers > Organizers | [
"152273/images/image_1_compressed.jpg",
"152273/images/image_2_compressed.jpg",
"152273/images/image_3_compressed.jpg"
] | [
"152273/stls/holder.stl",
"152273/stls/main body.stl",
"152273/stls/screw.stl"
] | CC0 | https://www.printables.com/model/152273 | data_0002.tar |
143481 | Airbrush Holder and Cleaning Lid |
<p>This is another airbrush cleaning lid with a couple of modifications of my own. It is designed to fit canning jar screw caps and is best used on a 320ml jar.</p>
<p>Modifications include:</p>
<ul>
<li>Off-setting the brush port to the left and further to the back of the lid base. This decreases the chance of the ... | [
"airbrush",
"thingiverse",
"airbrushstand",
"airbrushcleaner",
"masonjar",
"cleaningpot"
] | Hobby & Makers > Other Ideas | [
"143481/images/image_1_compressed.jpg",
"143481/images/image_2_compressed.jpg",
"143481/images/image_3_compressed.jpg"
] | [
"143481/stls/Airbrush_Cleaner_Lid.stl"
] | CC-BY | https://www.printables.com/model/143481 | data_0002.tar |
216823 | Airbrush holder for Harder & Steenbeck Ultra | <p>Printing time around 1.5-2h. Printed with PLA without supports.<br> </p> | [
"airbrush",
"ultra",
"aerograf"
] | Hobby & Makers > Tools | [
"216823/images/image_1_compressed.jpg",
"216823/images/image_2_compressed.jpg"
] | [
"216823/stls/AirbrushHolder_HSUltra.stl"
] | CC0 | https://www.printables.com/model/216823 | data_0002.tar |
284113 | Airbrush trigger cover | [
"cover",
"airbrush",
"trigger"
] | Hobby & Makers > Other Ideas | [
"284113/images/image_1_compressed.jpg",
"284113/images/image_2_compressed.jpg",
"284113/images/image_3_compressed.jpg"
] | [
"284113/stls/airbrush trigger cover.stl"
] | CC-BY | https://www.printables.com/model/284113 | data_0002.tar | |
296201 | Airbus A320 Engine | <p>I 3D desingned this model to be print with commun paramethers, it doesnt require horizontal expansion.</p><p>It just need supports in certain parts.</p><p>The mechanism require 4 bearings of 32mm (there are 3D bearings models that you can print, so you can avoid buying them)</p><p>Finally all the pices have holes in... | [
"engine",
"airplane",
"turbofan",
"cfm"
] | Learning > Engineering | [
"296201/images/image_1_compressed.jpg",
"296201/images/image_2_compressed.jpg",
"296201/images/image_3_compressed.jpg",
"296201/images/image_4_compressed.jpg",
"296201/images/image_5_compressed.jpg",
"296201/images/image_6_compressed.jpg",
"296201/images/image_7_compressed.jpg",
"296201/images/image_8... | [
"296201/stls/Back.stl",
"296201/stls/BackCover.stl",
"296201/stls/Base1.stl",
"296201/stls/Base2.stl",
"296201/stls/BigCover1.stl",
"296201/stls/BigCover2.stl",
"296201/stls/BigCover3.stl",
"296201/stls/BigSlits.stl",
"296201/stls/Body1.stl",
"296201/stls/Body2.stl",
"296201/stls/Body3.stl",
"... | CC-BY | https://www.printables.com/model/296201 | data_0002.tar |
407827 | Airbus A380 slingshot glider (Only need one elastic band!) | <p><strong>Hello!</strong></p><p>This Glider has been based off the world’s largest passenger plane the<a href="https://www.airbus.com/en/products-services/commercial-aircraft/passenger-aircraft/a380"> Airbus A380-800</a>. </p><p>Both the wing <i>(and body)</i> shape as well as the tail wing/stabiliser are nearly ... | [
"outdoor",
"airplane",
"glider",
"airbus",
"a380",
"slingshot"
] | Toys & Games > Outdoor Toys | [
"407827/images/image_1_compressed.jpg",
"407827/images/image_2_compressed.jpg",
"407827/images/image_3_compressed.jpg",
"407827/images/image_4_compressed.jpg",
"407827/images/image_5_compressed.jpg",
"407827/images/image_6_compressed.jpg",
"407827/images/image_7_compressed.jpg"
] | [
"407827/stls/final cut wings.stl",
"407827/stls/final.stl",
"407827/stls/hook.stl",
"407827/stls/stick.stl",
"407827/stls/tail_wing.stl"
] | CC-BY | https://www.printables.com/model/407827 | data_0002.tar |
788695 | Airless Basketball (Showcase Model) | <p>This airless basketball design is inspired by the Wilson prototype airless basketball. This is perfect for the showcase of a Basketball fan.</p><p>I created this in the original basketball size 7. So maybe you have to scale it down so that this fit on your printer plate. To make it some easier here is a table of the... | [
"display",
"decoration",
"case",
"present",
"sport",
"gift",
"fan",
"showcase",
"sports",
"airless",
"future",
"basketball",
"culture"
] | Sports & Outdoor > Outdoor Sports | [
"788695/images/image_1_compressed.jpg",
"788695/images/image_2_compressed.jpg",
"788695/images/image_3_compressed.jpg"
] | [
"788695/stls/Basketball_ver_0.4.stl"
] | CC-BY | https://www.printables.com/model/788695 | data_0002.tar |
788699 | Airless Basketball 2 (Showcase Model) | <p>This airless basketball design is inspired by the Wilson prototype airless basketball. This is perfect for the showcase of a Basketball fan.</p><p>I created this in the original basketball size 7. So maybe you have to scale it down so that this fit on your printer plate. To make it some easier here is a table of the... | [
"display",
"decoration",
"case",
"present",
"sport",
"gift",
"fan",
"showcase",
"sports",
"airless",
"future",
"basketball",
"culture"
] | Sports & Outdoor > Outdoor Sports | [
"788699/images/image_1_compressed.jpg",
"788699/images/image_2_compressed.jpg",
"788699/images/image_3_compressed.jpg"
] | [
"788699/stls/Basketball_ver_0.5.stl"
] | CC-BY | https://www.printables.com/model/788699 | data_0002.tar |
845735 | airless ping-pong ball | good working airless pingpongball | Download free 3D printable STL models | [] | Sports & Outdoor > Outdoor Sports | [
"845735/images/image_1_compressed.jpg"
] | [
"845735/stls/AirlessPingPongBall.stl"
] | CC-BY | https://www.printables.com/model/845735 | data_0002.tar |
1213302 | Airless Tennis Ball | <p><strong>Airless Tennis Ball</strong>, <i>a design based on improvements from other designs.</i></p><p> </p><p>Improvements:</p><p>Improved hex mesh density to add strength and functionality in a wider range of materials.<br>General increase in thickness for a better feeling of weight and bounce.<br>Polished sea... | [
"ball",
"tpu",
"tennis",
"tennisball",
"airless",
"airlessball"
] | Sports & Outdoor > Outdoor Sports | [
"1213302/images/image_1_compressed.jpg"
] | [
"1213302/stls/airlesstennisball.stl"
] | CC0 | https://www.printables.com/model/1213302 | data_0002.tar |
1080572 | Airless Tennis Ball GEN 2 | <p>Airless Tennis ball GEN 2 brings improvements, which were tested in Tech Solutions workspace. Ball is designed to be printed with almost no support when printed on any Bambu lab 3D printer. Compatible materials; PLA, PETG, fiber reinforced materials, TPU …</p><p> </p><p>Enjoy Improvements comming in STL.</p> | [
"tennis",
"sports",
"airless"
] | Sports & Outdoor > Indoor Sports | [
"1080572/images/image_1_compressed.jpg"
] | [
"1080572/stls/Airless Tennis Ball GEN 2.stl"
] | CC0 | https://www.printables.com/model/1080572 | data_0002.tar |
1720848 | Airless tennisball | <p>This is a remix of this model:</p><p> <a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.printables.com/model/1222316-airless-volleyball/files">https://www.printables.com/model/1222316-airless-volleyball/files</a></p> | [
"tennis",
"tennisball",
"airless",
"airlessball"
] | Sports & Outdoor > Outdoor Sports | [
"1720848/images/image_1_compressed.jpg",
"1720848/images/image_2_compressed.jpg"
] | [
"1720848/stls/airless tennis ball (2).stl"
] | CC-BY | https://www.printables.com/model/1720848 | data_0002.tar |
250068 | Airplane |
<p>Airplane</p>
Category: Art
| [
"airplane",
"thingiverse"
] | Art & Design > Other Art & Designs | [
"250068/images/image_1_compressed.jpg",
"250068/images/image_2_compressed.jpg"
] | [
"250068/stls/airplane_stand.stl",
"250068/stls/AIRPLANE_v1.stl"
] | CC-BY | https://www.printables.com/model/250068 | data_0002.tar |
334899 | Airplane Cookie Cutter | <p>Needed to bring something for my engineering college Christmas party. Wanted to make cookies but didn't have any cutters. That's when I came up with the idea to whip up this airplane cookie cutter for the Aero Club. While 3D printing isn't inherently food safe, I took care to sand off any stringing... | [
"kitchen",
"christmas",
"cookie",
"cutter",
"easytoprint",
"easy",
"airplane",
"easyprint"
] | Household > Kitchen | [
"334899/images/image_1_compressed.jpg",
"334899/images/image_2_compressed.jpg",
"334899/images/image_3_compressed.jpg",
"334899/images/image_4_compressed.jpg"
] | [
"334899/stls/Plane_Cookie_Cutter.stl"
] | CC-BY | https://www.printables.com/model/334899 | data_0002.tar |
388862 | Airplane instruments clocks - MMU | <p>Here is a remix of the altimeter desk clock, including a tilted version, or with magnets, and also extra faces/needles (Airspeed and Heading indicator), with MMU compatibility if you have it (use faces with “MMU Only” and split them to parts). It also works without MMU, just set an extruder change on the faces and f... | [
"mmu",
"clock",
"mmu2s",
"airplane",
"instrument",
"cockpit",
"altimeter",
"airspeed",
"heading"
] | Gadgets > Other Gadgets | [
"388862/images/image_1_compressed.jpg",
"388862/images/image_2_compressed.jpg",
"388862/images/image_3_compressed.jpg"
] | [
"388862/stls/AltiClock Faces.stl",
"388862/stls/Back Flat.stl",
"388862/stls/Back Tilted.stl",
"388862/stls/Button.stl",
"388862/stls/Face Airspeed - MMU only - split to parts.stl",
"388862/stls/Face Airspeed - No MMU - set extruder change.stl",
"388862/stls/Face Altimeter - MMU only - split to parts.st... | GPL3.0 | https://www.printables.com/model/388862 | data_0002.tar |
544687 | airplane kit card | its a airplane | Download free 3D printable STL models | [] | Hobby & Makers > Automotive | [
"544687/images/image_1_compressed.jpg"
] | [
"544687/stls/AIRPLANE kit card.stl"
] | CC0 | https://www.printables.com/model/544687 | data_0002.tar |
678066 | Airplane ornament | <p>This is a little airplane ornament that has a spot for you to put a hook to hand it on you Christmas tree, I would recommend using supports just for the hole that the hook goes into, but besides that enjoy and merry Christmas. also i would not recommend making it larger because the main size it comes in is a good or... | [
"christmas",
"airplane",
"aviation",
"christmasornament"
] | Seasonal designs > Winter & Christmas & New Year's | [
"678066/images/image_1_compressed.jpg"
] | [
"678066/stls/aircraft ornament.stl"
] | CC-BY | https://www.printables.com/model/678066 | data_0002.tar |
37621 | Airpod Skadis | <p>A airpod holder for the Ikea Skadis pegboard. I left some space in case you use a silicon protector. Charger cable will fit in the hole</p>
<h3>Print instructions</h3><p>Print it upside down. The rest does not matter. I printed it in PLA 0.15 thickness and 15%infill</p> | [] | Gadgets > Portable Devices | [
"37621/images/image_1_compressed.jpg"
] | [
"37621/stls/airpods2skadis-v2.stl"
] | CC0 | https://www.printables.com/model/37621 | data_0002.tar |
23535 | AirPods Charging Dock | <p>Remixed from <a href="/CarlTheCreator">CarlTheCreator's</a> <a href="https://www.thingiverse.com/thing:2035232">AirPod Charge Dock</a>. Took 20 mm off the back so that the AirPods case could open while charging. Rotated the thing 126.5 degrees to make it sit flat on the print bed.</p>
<p>Put some small <a href="http... | [
"apple",
"thingiverse",
"airpod",
"airpods",
"airpodsstand",
"appleairpod",
"airpodscharger",
"applecharger"
] | Gadgets > Audio | [
"23535/images/image_1_compressed.jpg",
"23535/images/image_2_compressed.jpg",
"23535/images/image_3_compressed.jpg"
] | [
"23535/stls/airpods_charging_dock_-_shorter.stl"
] | CC-BY | https://www.printables.com/model/23535 | data_0002.tar |
442399 | AirPods Pro 2 IKEA SKADIS charger | I reworked the design from dextr327 to fit the IKEA skadis | Download free 3D printable STL models | [
"airpods",
"airpodscharger",
"airpodspro"
] | Gadgets > Audio | [
"442399/images/image_1_compressed.jpg",
"442399/images/image_2_compressed.jpg",
"442399/images/image_3_compressed.jpg"
] | [
"442399/stls/AirPods Pro 2 charger Ikea Skadis.stl"
] | CC-BY | https://www.printables.com/model/442399 | data_0002.tar |
271019 | Airpods Pro for Skadis | <p>An Airpod Pro holder for the Ikea Skadis pegboard. It will fit like a glove.</p><p>Charger cable will fit in the hole on the bottom.</p><p> </p><p>Fusion360 file is added for you to modify. If you need help…just ask me.</p><p>I added a model (upon request) that would grip the board tighter.</p> | [
"ikea",
"apple",
"pegboard",
"skadis",
"pegboardmount",
"airpods",
"ikeaskadis",
"airpodspro",
"airpodspromount",
"airpodsprocase"
] | Gadgets > Audio | [
"271019/images/image_1_compressed.jpg"
] | [
"271019/stls/AirpodsPro2skadis v3.stl",
"271019/stls/AirpodsPro2skadis_tighter.stl"
] | CC0 | https://www.printables.com/model/271019 | data_0002.tar |
212048 | Airpods Pro Stand |
<p>Stand for Apple Airpods Pro. The hole in the bottom is meant to be able to accommodate a standard Apple lightning cable plug.</p>
<p>Printed with PLA+ on Creality Ender 3 Pro.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </st... | [
"thingiverse",
"airpodsstand",
"airpodspro"
] | Fashion > Other Fashion Accessories | [
"212048/images/image_1_compressed.jpg",
"212048/images/image_2_compressed.jpg"
] | [
"212048/stls/Pro.stl",
"212048/stls/Pro_low.stl"
] | CC-BY | https://www.printables.com/model/212048 | data_0002.tar |
314764 | AirPods Pro Wall Mounted Holder | <p>This was measured and designed with a dbrand skin on my case and for the stock apple charging cable to go through the slot (other brand cables may have larger cable diameters or larger end, uh, aglets(..?) that connect the cable to the connector itself.</p><p>There are 3 files: the charging slot (pictured) so that y... | [
"airpodspro"
] | Gadgets > Portable Devices | [
"314764/images/image_1_compressed.jpg",
"314764/images/image_2_compressed.jpg",
"314764/images/image_3_compressed.jpg"
] | [
"314764/stls/AirPodPro-ShelfMount-ChargingSlot.stl",
"314764/stls/AirPodPro-ShelfMount-HoleOnly.stl",
"314764/stls/AirPodPro-ShelfMount-SolidBottom.stl"
] | CC-BY | https://www.printables.com/model/314764 | data_0002.tar |
42663 | AirPods Pro Wireless Charging Adapter for Tesla Model 3 | <p>Allows you to charge the AirPods Pro in the Tesla Model 3 wireless charger without slipping :)</p>
<p>Works as an MMU print, or single color!</p>
| [
"charger",
"wireless",
"tesla",
"thingiverse",
"airpods",
"airpodspro",
"tm3"
] | Hobby & Makers > Automotive | [
"42663/images/image_1_compressed.jpg",
"42663/images/image_2_compressed.jpg"
] | [
"42663/stls/part_studio_1_-_charging_adapter.stl",
"42663/stls/part_studio_1_-_lower_logo.stl",
"42663/stls/part_studio_1_-_upper_logo.stl",
"42663/stls/tesla-airpods-pro-charging-adapter.stl"
] | CC-BY | https://www.printables.com/model/42663 | data_0002.tar |
30574 | AirPods Sleeve | <p>Designed against an AirPods G1 case, works with G2 as well. Interference fit locks the sleeve in place. Small latch on top portion fits into the front gap to make it easier to open. Meant to be printed with a flexible thermoplastic.</p>
<h3>Print instructions</h3><p>Printer brand:<br/>
Creality</p>
<p>Printer:<br/>
... | [
"case",
"flexible",
"protective",
"apple",
"airpods",
"sleeve"
] | Gadgets > Audio | [
"30574/images/image_1_compressed.jpg",
"30574/images/image_2_compressed.jpg",
"30574/images/image_3_compressed.jpg"
] | [
"30574/stls/airpods_sleeve.stl",
"30574/stls/base.stl",
"30574/stls/cap.stl"
] | BSD | https://www.printables.com/model/30574 | data_0002.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.