model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
161609 | Abandon Ship - Balancing Game | I saw this design on tiktok and wanted to play it so I designed it. | Download free 3D printable STL models | [
"toy",
"puzzle",
"game",
"balance",
"tetris",
"jenga",
"balancing"
] | Toys & Games > Other Toys & Games | [
"161609/images/image_1_compressed.jpg",
"161609/images/image_2_compressed.jpg"
] | [
"161609/stls/base_dont rock the boat.stl",
"161609/stls/i_dont rock the boat.stl",
"161609/stls/l_dont rock the boat.stl",
"161609/stls/square_dont rock the boat.stl",
"161609/stls/z_dont rock the boat.stl"
] | CC0 | https://www.printables.com/model/161609 | data_0001.tar |
617989 | ABB Tango light frame | <p>I used tpu filament Filament SPECTRUM / S-FLEX 98A / GLOW IN THE DARK.</p> | [] | Household > Other House Equipment | [
"617989/images/image_1_compressed.jpg",
"617989/images/image_2_compressed.jpg"
] | [
"617989/stls/abb Light Frame.stl",
"617989/stls/abb tango light frame.stl"
] | GPL2.0 | https://www.printables.com/model/617989 | data_0001.tar |
1563326 | Aberrant John Doe from Forsaken (Articulated Roblox Figure) | <p>"READY FOR SOME HEAD-TWISTIN FUN!? HOW ABOUT SOME LIMB-CRUSHING PLAYTIME?! LET'S HAVE FUN WITH THE ALL-NEW ABERRANT JOHN DOE FIGURE!!"</p><p>Around the same time that I was developing him, I reached 5,000 downloads. That got me to level 14. I already knew this figure would be a big deal. It's going to get me to 50 m... | [
"forsaken",
"articulated",
"roblox",
"johndoe",
"robloxfigure",
"robloxforsaken",
"articulatedrobloxfigure"
] | Toys & Games > Action Figures & Statues | [
"1563326/images/image_1_compressed.jpg",
"1563326/images/image_10_compressed.jpg",
"1563326/images/image_11_compressed.jpg",
"1563326/images/image_12_compressed.jpg",
"1563326/images/image_13_compressed.jpg",
"1563326/images/image_14_compressed.jpg",
"1563326/images/image_15_compressed.jpg",
"1563326/... | [
"1563326/stls/(EXTRA) Corrupted Left Arm.stl",
"1563326/stls/(EXTRA) Normasl Right Arm.stl",
"1563326/stls/Aberrant John Doe Full Body.stl",
"1563326/stls/AJD's Corrupted Right Arm.stl",
"1563326/stls/AJD's Left Arm + Head.stl",
"1563326/stls/AJD's Legs.stl",
"1563326/stls/AJD's Torso.stl",
"1563326/s... | CC-BY | https://www.printables.com/model/1563326 | data_0001.tar |
925080 | ABS Warning Light Keychain | <p>keychain for your needs. Cut Down if need be.</p><ul><li>4mm base and 0.8 color change (0.2 layers = 4 layers)</li><li>31mm x 30mm</li><li>6mm Keyring hole</li></ul> | [
"car",
"truck",
"toyota",
"ford",
"gmc",
"chevy",
"dodge"
] | Art & Design > Other Art & Designs | [
"925080/images/image_1_compressed.jpg",
"925080/images/image_2_compressed.jpg"
] | [
"925080/stls/abs.stl"
] | CC-BY | https://www.printables.com/model/925080 | data_0001.tar |
1590598 | Abstract Minimal Animals – Forest Set (Low Poly, 4 Models) | <h3>🐾 Abstract Minimal Animals – Forest Set (Low Poly)</h3><p>This set includes <strong>four minimalist low-poly animal figures</strong> designed in a clean, modern geometric style:<br><strong>Fox, Bear, Deer, and Wolf</strong>.</p><p>The models are intentionally <strong>highly simplified</strong>, focusing on clear s... | [
"display",
"shelf",
"3d",
"office",
"detail",
"statue",
"desktop",
"print",
"color",
"lowpoly",
"animal",
"deer",
"low",
"minimal",
"poly",
"figurine",
"polygon",
"support",
"no",
"nordic",
"decor",
"design",
"scandinavian",
"interior",
"art",
"geometric",
"sculpt... | Art & Design > Sculptures | [
"1590598/images/image_1_compressed.jpg",
"1590598/images/image_2_compressed.jpg",
"1590598/images/image_3_compressed.jpg",
"1590598/images/image_4_compressed.jpg",
"1590598/images/image_5_compressed.jpg",
"1590598/images/image_6_compressed.jpg"
] | [
"1590598/stls/lowpolybear.stl",
"1590598/stls/lowpolydeer.stl",
"1590598/stls/lowpolyfox.stl",
"1590598/stls/lowpolywolf.stl"
] | CC0 | https://www.printables.com/model/1590598 | data_0001.tar |
60507 | ABUS key cap | <p>On my bike I have two different keys to use that look almost the same.<br>To differ the keys from each other I created an enclosing key cap.</p><p> </p><p>In pictures you'll see a labeled the cap but the files are not labeled.</p><p>Theres also a STEP model so you can create your own labeling text.</p><p> ... | [
"cover",
"key",
"keycap",
"keycover",
"abus",
"abuslock"
] | Hobby & Makers > Organizers | [
"60507/images/image_1_compressed.jpg",
"60507/images/image_2_compressed.jpg",
"60507/images/image_3_compressed.jpg",
"60507/images/image_4_compressed.jpg",
"60507/images/image_5_compressed.jpg",
"60507/images/image_6_compressed.jpg",
"60507/images/image_7_compressed.jpg",
"60507/images/image_8_compres... | [
"60507/stls/ABUS-cover_wo-label.stl"
] | CC0 | https://www.printables.com/model/60507 | data_0001.tar |
49937 | AC DC logo | <p>AC DC logo</p>
<h3>Print instructions</h3><h3>Category: 3D Printing Summary</h3>
<p>AC DC logo</p>
<h3> Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>i3 MK3</p></div><strong>Rafts:</strong></div></p>
<p>No</p>
<p>... | [
"thingiverse"
] | Art & Design > 2D Plates & Logos | [
"49937/images/image_1_compressed.jpg"
] | [
"49937/stls/acdc.stl"
] | CC-BY | https://www.printables.com/model/49937 | data_0001.tar |
79459 | AC Milan Logo Remix | <p>I cutted the original file to print it in several colors. Just glue them together.</p>
Category: Other | [
"thingiverse"
] | Art & Design > 2D Plates & Logos | [
"79459/images/image_1_compressed.jpg",
"79459/images/image_2_compressed.jpg",
"79459/images/image_3_compressed.jpg",
"79459/images/image_4_compressed.jpg",
"79459/images/image_5_compressed.jpg",
"79459/images/image_6_compressed.jpg",
"79459/images/image_7_compressed.jpg",
"79459/images/image_8_compres... | [
"79459/stls/1899_schwarz.stl",
"79459/stls/acm_schwarz.stl",
"79459/stls/Boden_schwarz.stl",
"79459/stls/Halbboegen_weiss.stl",
"79459/stls/ring_rot.stl",
"79459/stls/Staebe_rot.stl",
"79459/stls/Staebe_weiss.stl"
] | CC-BY | https://www.printables.com/model/79459 | data_0001.tar |
15094 | AC Sparta Prague - cookie cutter | <p>Designed by Zdenda, sliced by Vojta, used by me :)</p>
<h3>Print instructions</h3><h3>Category: Kitchen & Dining Print Settings</h3>
<p><strong>Printer Brand:</strong> Prusa</p>
<p><strong>Printer:</strong> MMU2s</p>
<p><strong>Rafts:</strong> No</p>
<p><strong>Supports:</strong> No</p>
<p><strong>Filament:</str... | [
"cookie",
"cookiecutter",
"thingiverse",
"gingerbread"
] | Household > Kitchen | [
"15094/images/image_1_compressed.jpg",
"15094/images/image_2_compressed.jpg",
"15094/images/image_3_compressed.jpg",
"15094/images/image_4_compressed.jpg",
"15094/images/image_5_compressed.jpg",
"15094/images/image_6_compressed.jpg",
"15094/images/image_7_compressed.jpg"
] | [
"15094/stls/acs.stl"
] | CC-BY | https://www.printables.com/model/15094 | data_0001.tar |
180127 | Acceleration/ junction deviation test piece |
<p>A simple test tower for tuning acceleration and jerk/junction deviation.</p>
<p>Fully customisable with the source file: <a href="https://cad.onshape.com/documents/1afa1c55109b3ef715f6a6c1/w/23d23b4f073e5e6749fc66f2/e/18cceba522813632f4ef37ec">https://cad.onshape.com/documents/1afa1c55109b3ef715f6a6c1/w/23d23b4f0... | [
"calibration",
"tower",
"thingiverse",
"acceleration",
"jerk"
] | 3D Printers > Test Models | [
"180127/images/image_1_compressed.jpg",
"180127/images/image_2_compressed.jpg"
] | [
"180127/stls/acceleration_test_piece.stl"
] | CC-BY | https://www.printables.com/model/180127 | data_0001.tar |
794386 | Accelerometer mounts for Sv07/+ | <p>Mounts for Sv07/+ accelerometer to make changing its location easier and faster.</p><p>Tips and info</p><ul><li>Both mounts use the same locations and orientations as they would without the box.</li><li>would recommend printing the “BOTH” file and printing the other 2 if one happens to break</li><li>for "XAxisAccele... | [
"mount",
"bracket",
"accelerometer",
"sovol",
"sv07",
"sovolsv07",
"sv07plus",
"sovolsv07plus",
"accelerometermount",
"accelerometerbracket"
] | 3D Printers > Other Printer Parts & Upgrades | [
"794386/images/image_1_compressed.jpg",
"794386/images/image_2_compressed.jpg",
"794386/images/image_3_compressed.jpg",
"794386/images/image_4_compressed.jpg"
] | [
"794386/stls/Accelerometer mounts BOTH.stl",
"794386/stls/XAxisAccelerometerMountForSV07PLUS.stl",
"794386/stls/YAxisAccelerometerMountForSV07PLUS.stl"
] | CC-BY | https://www.printables.com/model/794386 | data_0001.tar |
120520 | Accessoire photobooth - Lunettes | Accessoire photobooth pour baguette de 6mm | Download free 3D printable STL models | [] | Costumes & Accessories > Props | [
"120520/images/image_1_compressed.jpg"
] | [
"120520/stls/Lunettes.stl",
"120520/stls/Lunettes_Soleil.stl"
] | CC0 | https://www.printables.com/model/120520 | data_0001.tar |
120517 | Accessoire photobooth - moustaches | Accessoire photobooth pour baguette de 6mm | Download free 3D printable STL models | [] | Costumes & Accessories > Props | [
"120517/images/image_1_compressed.jpg"
] | [
"120517/stls/Moustache_1.stl",
"120517/stls/Moustache_2.stl",
"120517/stls/Moustache_3.stl"
] | CC0 | https://www.printables.com/model/120517 | data_0001.tar |
120510 | Accessoire photobooth - pipe | [] | Costumes & Accessories > Props | [
"120510/images/image_1_compressed.jpg"
] | [
"120510/stls/Pipe.stl"
] | CC0 | https://www.printables.com/model/120510 | data_0001.tar | |
1200056 | Accessories for Posable Skeleton Army | <p>The shields and axe are original works the shields use the original shield handle, the helmeted head is mostly the original skull model created by Soozafone, with a primitively sculpted helmet attached</p><p>For a colour change on the shields I recommend doing this at layer 7 if you do not have access to a multi mat... | [
"skeleton",
"actionfigure",
"posable",
"dummy13accessory"
] | Toys & Games > Action Figures & Statues | [
"1200056/images/image_1_compressed.jpg",
"1200056/images/image_2_compressed.jpg",
"1200056/images/image_3_compressed.jpg",
"1200056/images/image_4_compressed.jpg"
] | [
"1200056/stls/Axe.stl",
"1200056/stls/Possable Skeleton Army Accessories.stl",
"1200056/stls/Skeleton Shield Emblem 1.stl",
"1200056/stls/Skeleton Shield Emblem 2.stl",
"1200056/stls/Skull Helmet.stl"
] | CC-BY | https://www.printables.com/model/1200056 | data_0001.tar |
124243 | Accessorio chiave esagonale | <p>Accessorio per chiavi esagonali a "L"<br>Trasforma la chiave esagonale in un giravite.</p><p>La versione n°1 "v1" per chiavi esagonali più piccole.<br>La versione n°2 "v2" integra chiavi esagonali massimo 5.5mm</p><p>Per chiavi esagonali superiori consiglio di aumentare direttamente la % sullo slicer.<br> </p> | [
"mk3s",
"petg",
"accessorio",
"esagonale",
"chiave"
] | 3D Printers > Accessories | [
"124243/images/image_1_compressed.jpg",
"124243/images/image_2_compressed.jpg",
"124243/images/image_3_compressed.jpg",
"124243/images/image_4_compressed.jpg",
"124243/images/image_5_compressed.jpg",
"124243/images/image_6_compressed.jpg",
"124243/images/image_7_compressed.jpg",
"124243/images/image_8... | [
"124243/stls/bloccaggio.stl",
"124243/stls/per chiave esagonale v1.stl",
"124243/stls/per chiave esagonale v2.stl"
] | CC0 | https://www.printables.com/model/124243 | data_0001.tar |
641284 | Accessory cover for waste bin "Prusa Bin MK4" (Ergänzung für diese Abfallbox) | <p> </p><p>It fits on this bin: https://www.printables.com/de/model/526044-prusa-mk4-bin</p> | [
"toolbox",
"bin",
"waste"
] | 3D Printers > Prusa Parts & Upgrades | [
"641284/images/image_1_compressed.jpg",
"641284/images/image_2_compressed.jpg",
"641284/images/image_3_compressed.jpg",
"641284/images/image_4_compressed.jpg",
"641284/images/image_5_compressed.jpg",
"641284/images/image_6_compressed.jpg",
"641284/images/image_7_compressed.jpg",
"641284/images/image_8... | [
"641284/stls/edge cover.stl"
] | CC-BY | https://www.printables.com/model/641284 | data_0001.tar |
437105 | Accurate human anatomy model | <p>Good anatomical model for educating patients and in another educational purpose or if you want to use as decoration. Not 100% correct but very close and the best one available in my opinion. Printed in white PLA and painted. </p><p>Used .4 nozzil and .12 layer higth.</p><p>Attached the legs are split into 2 for... | [
"education",
"educational",
"teaching",
"muscle",
"medical",
"anatomical",
"medicine",
"anatomy"
] | Learning > Other 3D Objects for Learning | [
"437105/images/image_1_compressed.jpg",
"437105/images/image_2_compressed.jpg",
"437105/images/image_3_compressed.jpg",
"437105/images/image_4_compressed.jpg"
] | [
"437105/stls/Base.stl",
"437105/stls/Hand_L.stl",
"437105/stls/Hand_R.stl",
"437105/stls/Head.stl",
"437105/stls/Leg_L.stl",
"437105/stls/Leg_L_lower.stl",
"437105/stls/Leg_L_upper.stl",
"437105/stls/Leg_R.stl",
"437105/stls/Leg_R_lower.stl",
"437105/stls/Leg_R_upper.stl",
"437105/stls/Torso.stl... | CC0 | https://www.printables.com/model/437105 | data_0001.tar |
710221 | Ace of Spades Handcannon Replica | <figure class="media"><oembed url="https://www.youtube.com/watch?v=f-p6nP0QCig"></oembed></figure> | [
"prop",
"destiny",
"handcannon",
"cayde6"
] | Costumes & Accessories > Props | [
"710221/images/image_1_compressed.jpg",
"710221/images/image_2_compressed.jpg",
"710221/images/image_3_compressed.jpg",
"710221/images/image_4_compressed.jpg",
"710221/images/image_5_compressed.jpg",
"710221/images/image_6_compressed.jpg",
"710221/images/image_7_compressed.jpg"
] | [
"710221/stls/BarrelLower_P.1.stl",
"710221/stls/BarrelLower_p.2.stl",
"710221/stls/BarrelUpper.stl",
"710221/stls/Cylinder.stl",
"710221/stls/CylinderArm.stl",
"710221/stls/CylinderMount.stl",
"710221/stls/Hammer.stl",
"710221/stls/HammerLever.stl",
"710221/stls/HandleOrnament.stl",
"710221/stls/H... | CC-BY | https://www.printables.com/model/710221 | data_0001.tar |
183718 | Ace The Beaver |
<p>just the beaver</p>
Category: Other
| [
"thingiverse",
"beaver",
"snorkel"
] | Hobby & Makers > Other Ideas | [
"183718/images/image_1_compressed.jpg"
] | [
"183718/stls/AceTheBeaver.stl"
] | CC-BY | https://www.printables.com/model/183718 | data_0001.tar |
208385 | Achilles Stretcher / Roller | <p>This design is based on a size 10 UK shoe size but can be used for smaller.</p> | [] | Healthcare > Home Medical Tools | [
"208385/images/image_1_compressed.jpg",
"208385/images/image_2_compressed.jpg"
] | [
"208385/stls/Das Boot.stl"
] | GPL2.0 | https://www.printables.com/model/208385 | data_0001.tar |
536086 | ACME / QCC Type 1 propane female cap and male plug | <p>The threads are designed to have a 10 degree taper on the "bottom" side to match the ACME thread surface it engages, and flat on the "top" to minimize unnecessary binding. The plug has an center tapered seat that engages the propane hose center brass fitting to create a snug sealing surface. The plug wil... | [
"propane",
"qcc"
] | Household > Outdoor & Garden | [
"536086/images/image_1_compressed.jpg",
"536086/images/image_2_compressed.jpg",
"536086/images/image_3_compressed.jpg"
] | [
"536086/stls/cap blank V1.2.stl",
"536086/stls/cap Empty V1.2.stl",
"536086/stls/cap Full V1.2.stl",
"536086/stls/cap Partial V1.2.stl",
"536086/stls/cap with hole V1.2.stl",
"536086/stls/plug V0.6.stl"
] | CC-BY | https://www.printables.com/model/536086 | data_0001.tar |
373003 | Acorn Keychain/Earring | <p>A simple acorn that you ca use as a keychain as I did or earrings.</p><p>Printed in 2 parts glued together.</p> | [
"earring",
"fashion",
"keychain",
"pendant",
"thingiverse",
"charm",
"acorn"
] | Fashion > Other Fashion Accessories | [
"373003/images/image_1_compressed.jpg",
"373003/images/image_2_compressed.jpg",
"373003/images/image_3_compressed.jpg",
"373003/images/image_4_compressed.jpg",
"373003/images/image_5_compressed.jpg"
] | [
"373003/stls/AcornBody.stl",
"373003/stls/AcronTop.stl"
] | CC-BY | https://www.printables.com/model/373003 | data_0001.tar |
226216 | Acorn Screw Container | <p>A screw-top hollow acorn with a loop for hanging. Could be useful for geocaching. There are original versions, a flipped body in a larger size, and the scaled-down version with a flip top and body. Enjoy!</p> | [
"thingiverse"
] | Sports & Outdoor > Outdoor Sports | [
"226216/images/image_1_compressed.jpg",
"226216/images/image_2_compressed.jpg",
"226216/images/image_3_compressed.jpg",
"226216/images/image_4_compressed.jpg"
] | [
"226216/stls/acorn_body_large.stl",
"226216/stls/acorn_body_large_flipped.stl",
"226216/stls/acorn_body_small.stl",
"226216/stls/acorn_cap_large.stl",
"226216/stls/acorn_cap_small.stl"
] | CC-BY | https://www.printables.com/model/226216 | data_0001.tar |
75084 | Acoustic Guitar Wall Mount | <p>This is a wall mount for a full size acoustic guitar. It requires 2 wood screws to fasten to a wood stud wall. It is also helpful to add some different material to the part of the mount that comes in contact with the acoustic guitar to keep the guitar from easily sliding around on the hard surface (and potentially f... | [] | Hobby & Makers > Music | [
"75084/images/image_1_compressed.jpg",
"75084/images/image_2_compressed.jpg",
"75084/images/image_3_compressed.jpg"
] | [
"75084/stls/Acoustic Guitar Wall Mount.stl"
] | CC0 | https://www.printables.com/model/75084 | data_0001.tar |
1068431 | acoustic panel hook | <p>Hooks for acoustic panels with a width of 13mm and a groove depth of 10mm.<br>The hook is self-clamping on the wooden slats.</p> | [] | Household > Home Decor | [
"1068431/images/image_1_compressed.jpg",
"1068431/images/image_2_compressed.jpg",
"1068431/images/image_3_compressed.jpg",
"1068431/images/image_4_compressed.jpg",
"1068431/images/image_5_compressed.jpg"
] | [
"1068431/stls/Base.stl",
"1068431/stls/Hook.stl"
] | GPL3.0 | https://www.printables.com/model/1068431 | data_0001.tar |
272138 | Acrobat Man | Fun little fidget actobat man! Just turn the crank and he will swing! | Download free 3D printable STL models | [
"toy",
"mechanical",
"fun",
"acrobat",
"swinging"
] | Toys & Games > Other Toys & Games | [
"272138/images/image_1_compressed.jpg",
"272138/images/image_2_compressed.jpg",
"272138/images/image_3_compressed.jpg",
"272138/images/image_4_compressed.jpg"
] | [
"272138/stls/Acrobat Pole.stl",
"272138/stls/Base Pole.stl",
"272138/stls/Base.stl",
"272138/stls/Body.stl",
"272138/stls/Crank.stl",
"272138/stls/Head.stl"
] | CC-BY | https://www.printables.com/model/272138 | data_0001.tar |
1258907 | Action cam / GoPro arm | <p><strong>I needed an L shaped arm for my helmet to point camera to the as where i look. So i designed this part.</strong></p><p><strong>Print orientation is as in the photo, i printed it with Esun PLA+ Fire Engine Red</strong></p> | [] | Sports & Outdoor > Outdoor Sports | [
"1258907/images/image_1_compressed.jpg",
"1258907/images/image_2_compressed.jpg"
] | [
"1258907/stls/Kameratutucu1.stl"
] | CC-BY | https://www.printables.com/model/1258907 | data_0001.tar |
765279 | Action Cam / GoPro Floating - Swimming Handle | <p>Handle for common action cam or GoPro mounts.</p><p>The standard screw + nut must be added.</p><ul><li>If printed with not too much infill, it will float. --> ideally for diving / swimming<ul><li>Attention: Floating function probably just for GoPro clones. (see comment section)</li></ul></li><li>At the top, where... | [
"gopro",
"handle",
"gopromount",
"thingiverse",
"actioncam"
] | Sports & Outdoor > Outdoor Sports | [
"765279/images/image_1_compressed.jpg",
"765279/images/image_2_compressed.jpg",
"765279/images/image_3_compressed.jpg"
] | [
"765279/stls/Schwimmkoerper.stl"
] | CC-BY | https://www.printables.com/model/765279 | data_0001.tar |
413483 | action figure | a fully adjustable action figure | Download free 3D printable STL models | [] | Tabletop Miniatures > Characters & Monsters | [
"413483/images/image_1_compressed.jpg"
] | [
"413483/stls/man.stl"
] | CC0 | https://www.printables.com/model/413483 | data_0001.tar |
688975 | Action figure MK1 | [] | Toys & Games > Action Figures & Statues | [
"688975/images/image_1_compressed.jpg",
"688975/images/image_2_compressed.jpg"
] | [
"688975/stls/Figure.stl"
] | CC-BY | https://www.printables.com/model/688975 | data_0001.tar | |
316859 | Action Skull with Bobblehead Brain | <p>This is a bobble-head Skull toy with action bobbling brain. This toy use a 3D printed spring that supports the brain and makes it bobble.</p><p>No supports are required and you can use minimal infill (10% is fine). The brain bobbles best if you print that part with more infill to add weight, but it isn't... | [
"halloween",
"skull",
"brain",
"bobblehead",
"bobble"
] | Toys & Games > Action Figures & Statues | [
"316859/images/image_1_compressed.jpg",
"316859/images/image_2_compressed.jpg",
"316859/images/image_3_compressed.jpg",
"316859/images/image_4_compressed.jpg"
] | [
"316859/stls/Assembly Tool.stl",
"316859/stls/PB-Brain-fin.stl",
"316859/stls/PB-Spring-Short.stl",
"316859/stls/Skull-Bob-fin.stl"
] | CC-BY | https://www.printables.com/model/316859 | data_0001.tar |
124920 | Activated Carbon Filter | <p>Activated carbon filter to remove odors from your 3D printer, works with FDM and resin.</p><p>The printer needs to be enclosed as is small and does not have the capacity to filter an entire room.</p><p><strong>Requirements</strong></p><p>1. You need to print one box (you can choose the design you prefer, but squares... | [
"filter",
"3dprinteraccessory",
"activatedcarbon",
"odour"
] | 3D Printers > Accessories | [
"124920/images/image_1_compressed.jpg",
"124920/images/image_2_compressed.jpg",
"124920/images/image_3_compressed.jpg",
"124920/images/image_4_compressed.jpg",
"124920/images/image_5_compressed.jpg",
"124920/images/image_6_compressed.jpg",
"124920/images/image_7_compressed.jpg",
"124920/images/image_8... | [
"124920/stls/Box - Hexagons.stl",
"124920/stls/Box - Squares.stl",
"124920/stls/Box Parts.stl",
"124920/stls/Feet.stl",
"124920/stls/Feets.stl",
"124920/stls/Lid.stl",
"124920/stls/Separator.stl"
] | CC-BY | https://www.printables.com/model/124920 | data_0001.tar |
406627 | Activated Carbon Filter for Bambu Lab X1 Carbon 3D Printer | <p>This is a refillable alternative to the original activated carbon filter by Bambu Lab. Just fill the box with activated carbon (I bought mine here: <a href="https://amzn.to/3lYflF9)">https://amzn.to/3lYflF9)</a>, and you are ready for another 60 days of printing. As shown in the video below, please make sure you add... | [
"carbonfilter",
"activatedcarbon",
"activatedcarbonfilter",
"bambulabx1",
"bambulab",
"bambulabs",
"activatedcarbonpellets"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"406627/images/image_1_compressed.jpg",
"406627/images/image_2_compressed.jpg"
] | [
"406627/stls/Activated Carbon Filter Box & Lid.stl",
"406627/stls/Activated Carbon Filter Box.stl",
"406627/stls/Activated Carbon Filter Lid.stl"
] | CC-BY | https://www.printables.com/model/406627 | data_0001.tar |
707780 | Activity Board - collection | <p>Printable activity board parts which I created for my kids to play with.<br>Printed by PETG, 10% infil, easy job.<br>Works well and kids enjoy it.<br> </p><p>For securing parts to the base board, use screw M3x15mm.<br>Thx hollac</p> | [
"board",
"kids",
"car",
"wheels",
"activity",
"cogs"
] | Gadgets > Other Gadgets | [
"707780/images/image_1_compressed.jpg",
"707780/images/image_2_compressed.jpg",
"707780/images/image_3_compressed.jpg",
"707780/images/image_4_compressed.jpg",
"707780/images/image_5_compressed.jpg",
"707780/images/image_6_compressed.jpg",
"707780/images/image_7_compressed.jpg",
"707780/images/image_8... | [
"707780/stls/activity_board_car_body.stl",
"707780/stls/activity_board_car_window.stl",
"707780/stls/activity_board_clock.stl",
"707780/stls/activity_board_clock_big_leg.stl",
"707780/stls/activity_board_clock_small_leg.stl",
"707780/stls/activity_board_gearshaft_assembly.stl",
"707780/stls/activity_boa... | CC0 | https://www.printables.com/model/707780 | data_0001.tar |
1170865 | Actually useful Sheep and Goat toilet/tissue paper roll holder and dispenser | <h3><strong>UPDATED STL FILES</strong></h3><p>An actually useful remix of the classic toilet paper holder.<br>This one can actually be used to dispense the paper.</p><p>A fantastic gift to give to your friends.</p><p>Printed from black PETG.</p><p>I use an epoxy glue to connect the legs. (POXYPOL)</p><p> </p><p>Ej... | [
"sheep",
"toiletpaper",
"dispenser",
"decorative",
"goat",
"papertowelrollholder"
] | Household > Home Decor | [
"1170865/images/image_1_compressed.jpg",
"1170865/images/image_2_compressed.jpg",
"1170865/images/image_3_compressed.jpg",
"1170865/images/image_4_compressed.jpg",
"1170865/images/image_5_compressed.jpg",
"1170865/images/image_6_compressed.jpg",
"1170865/images/image_7_compressed.jpg"
] | [
"1170865/stls/Goat Body and Tail.stl",
"1170865/stls/Goat Head.stl",
"1170865/stls/Goat Toilet Paper Holder.stl",
"1170865/stls/Legs.stl",
"1170865/stls/Sheep Body.stl",
"1170865/stls/sheep face.stl"
] | CC-BY | https://www.printables.com/model/1170865 | data_0001.tar |
615545 | Actually working Y Splitter for Bambulab printers | <p>An actually working Y splitter for Bambulab printers to be used to allow AMS and manual feeding without PTFE tubes switching</p><p> </p><p>NOTICE: Must follow instructions:</p><ol><li>This should be printed in 0.1 layer height !!</li><li>Connect as follows: A - AMS | M - Manual feed | P - to printer</li><li>Pri... | [
"splitter",
"bambulab",
"ams"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"615545/images/image_1_compressed.jpg",
"615545/images/image_2_compressed.jpg",
"615545/images/image_3_compressed.jpg",
"615545/images/image_4_compressed.jpg",
"615545/images/image_5_compressed.jpg",
"615545/images/image_6_compressed.jpg",
"615545/images/image_7_compressed.jpg"
] | [
"615545/stls/Y Combine 4.2 text AMS.stl",
"615545/stls/Y Combine 4.2 text.stl",
"615545/stls/Y Combine 4.2.3MF_NoText.stl"
] | CC-BY | https://www.printables.com/model/615545 | data_0001.tar |
51759 | AC/DC LED Lampe | <p>AC/DC LED Lampe mit Musiksteuerung.<br>Videolink<br><a href="https://youtu.be/-Fp9MfLFKs0">https://youtu.be/-Fp9MfLFKs0</a><br>Die Buchstaben einsetze, müssen noch richtig herum auf das Druck Bett gelegt werden. Die Einsätze haben auf einer Seite eine leichte Verdickung am Rand.Die Bohrung für die Kabel Durchführung... | [] | Hobby & Makers > Electronics | [
"51759/images/image_1_compressed.jpg",
"51759/images/image_2_compressed.jpg",
"51759/images/image_3_compressed.jpg"
] | [
"51759/stls/A Außen.stl",
"51759/stls/A Innen oben.stl",
"51759/stls/A Innen unten.stl",
"51759/stls/acdc-korpus (CBD).stl",
"51759/stls/acdc-korpus A.stl",
"51759/stls/acdc-korpus C.stl",
"51759/stls/acdc-korpus.stl",
"51759/stls/acdc-v5-einsatz-1.stl",
"51759/stls/acdc-v5-einsatz-2.stl",
"517... | CC0 | https://www.printables.com/model/51759 | data_0001.tar |
762494 | AD5M EasyKit #2 Adventurer 5m | <p>This is an easy kit to customize the AD5M without the need for hardware. The whole thing is snap on and it's really solid. I can't wait to see your color choices.</p><p>Happy printing.<br>Whole project can be print and installed in a day.</p> | [] | 3D Printers > Other Printer Parts & Upgrades | [
"762494/images/image_1_compressed.jpg",
"762494/images/image_2_compressed.jpg"
] | [
"762494/stls/BedHandleCover.stl",
"762494/stls/BottomLeft.stl",
"762494/stls/BottomRight.stl",
"762494/stls/ScreenCover.stl",
"762494/stls/TopLeft.stl",
"762494/stls/TopRight.stl"
] | CC0 | https://www.printables.com/model/762494 | data_0001.tar |
799543 | AD5M Enclosure Shelf | <p>A shelf to hold 5M printer essentials. Sized to fit the glue bottle that comes with the printer as well as other items. For the center mounting bolt be sure to use an M4 jam nut for clearance to print head. It gets very close to the frame.</p> | [
"shelf",
"enclosure",
"flashforge",
"ad5m"
] | 3D Printers > Other Printer Parts & Upgrades | [
"799543/images/image_1_compressed.jpg"
] | [
"799543/stls/AD5M_TrayV3.stl"
] | CC0 | https://www.printables.com/model/799543 | data_0001.tar |
1113479 | AD5M Filter Duct Cover | <p>Filter vent cover that snaps into the holes in the existing cover to seal hot air in the chamber. Without it the hot air just escapes through the electronics enclosure. I've seen others that replace the original cover completely but the compliant clips always break easily. </p> | [
"filter",
"cover",
"duct",
"vent",
"flashforge",
"5m",
"adventurer5m",
"ad5m"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1113479/images/image_1_compressed.jpg"
] | [
"1113479/stls/vent_cover.stl"
] | CC0 | https://www.printables.com/model/1113479 | data_0001.tar |
1198858 | AD5M Flashforge Lid Hinge | <p>I wasn't happy with the other lid hinges available online, so I made this one. Has a few cute features. Uses standard filament as the axle. Has a stopper on the top so the hinge catches itself and stays upright. I attached mine to the back of the printer, so the filament spool (which is required to mount the filamen... | [
"upgrade",
"lid",
"hinge",
"flashforge",
"adventurer",
"ad5m"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1198858/images/image_1_compressed.jpg",
"1198858/images/image_2_compressed.jpg",
"1198858/images/image_3_compressed.jpg",
"1198858/images/image_4_compressed.jpg",
"1198858/images/image_5_compressed.jpg"
] | [] | CC-BY | https://www.printables.com/model/1198858 | data_0001.tar |
914048 | AD5M Toolhead Duct (Stock Fan) (Outdated) | <p><strong>AD5M, Stock 0.2 OrcaSlicer profile</strong><br>Layer Height: 0.15<br>Perimeters: 2<br>Slow down on overhangs: Enabled<br>Material: PETG<br>Nozzle temp: 255°C<br>HotBed temp: 80 °C<br>Part cooling Fan: 10-50%<br>You will need 5x3 mm magnets.<br><br><strong>UPD 08.04.2025:</strong><br>- Marked this model as <s... | [
"flashforge",
"flashforgeadventurer",
"ad5m",
"ad5mpro"
] | 3D Printers > Other Printer Parts & Upgrades | [
"914048/images/image_1_compressed.jpg",
"914048/images/image_2_compressed.jpg",
"914048/images/image_3_compressed.jpg",
"914048/images/image_4_compressed.jpg",
"914048/images/image_5_compressed.jpg",
"914048/images/image_6_compressed.jpg",
"914048/images/image_7_compressed.jpg",
"914048/images/image_8... | [
"914048/stls/AD5M_FAN_V1.stl",
"914048/stls/AD5M_FAN_V2.stl",
"914048/stls/AD5M_FAN_V3.stl"
] | CC0 | https://www.printables.com/model/914048 | data_0001.tar |
1356213 | AD5X | <p>impression petg pour porte bobine AD5X</p> | [] | 3D Printers > Other Printer Parts & Upgrades | [
"1356213/images/image_1_compressed.jpg"
] | [
"1356213/stls/BOBINE 1.stl",
"1356213/stls/BOBINE 2.stl",
"1356213/stls/BOBINE 3.stl",
"1356213/stls/BOBINE 4.stl"
] | CC0 | https://www.printables.com/model/1356213 | data_0001.tar |
1480752 | AD5X 3-Plate Holder | <p><strong>3-plate holder </strong></p><p>Attaches to the left side of your AD5X</p><p><strong>Additional parts required for assembly:</strong></p><p>4 - M4*16</p> | [
"plateholder",
"ad5x"
] | 3D Printers > Accessories | [
"1480752/images/image_1_compressed.jpg",
"1480752/images/image_2_compressed.jpg",
"1480752/images/image_3_compressed.jpg"
] | [
"1480752/stls/AD5X 3-Plate Holder - Left.stl",
"1480752/stls/AD5X 3-Plate Holder - Right.stl",
"1480752/stls/AD5X 3-Plate Holder.stl"
] | CC-BY | https://www.printables.com/model/1480752 | data_0001.tar |
1511072 | AD5X 4-in-1 Bowden (PTFE) Tube Clips | <p><strong>4-in-1 Bowden (PTFE) Tube Clips</strong></p><p>Tidy up your AD5X' PTFE tubes with these clips.</p><p>5mm and 10mm versions. Prints in about 3 and 5 minutes respectively.</p><p>Good project for left-over filaments.</p> | [
"clip",
"ptfetube",
"tubeclamp",
"ptfe",
"ptfeguide",
"bowdenclamp",
"flashforge",
"bowdenclip",
"ptfetubeguide",
"tubeclip",
"ad5x"
] | 3D Printers > Accessories | [
"1511072/images/image_1_compressed.jpg",
"1511072/images/image_2_compressed.jpg",
"1511072/images/image_3_compressed.jpg",
"1511072/images/image_4_compressed.jpg",
"1511072/images/image_5_compressed.jpg",
"1511072/images/image_6_compressed.jpg"
] | [
"1511072/stls/10mm - AD5X 4-in-1 Bowden Tube Clips.stl",
"1511072/stls/5mm - AD5X 4-in-1 Bowden Tube Clips.stl",
"1511072/stls/AD5X 4-in-1 Bowden Tube Clips - FF.stl"
] | CC-BY | https://www.printables.com/model/1511072 | data_0001.tar |
1493772 | AD5X A1 & B1 Enclosure Remix - Plate Holder | <p><em>UPDATE: 02.19.2026</em></p><h3><strong>This has been revised to correct the issue preventing the plexiglass from sitting flush to the bottom of the printer.</strong></h3><p>Remix of AD5X 's A1 and B1 enclosure parts. This remix adds slots to both parts to hold 3 bed plates</p> | [
"plateholder",
"flashforge",
"ad5x",
"platebedholder",
"ad5xenclosure"
] | 3D Printers > Accessories | [
"1493772/images/image_1_compressed.jpg",
"1493772/images/image_2_compressed.jpg",
"1493772/images/image_3_compressed.jpg",
"1493772/images/image_4_compressed.jpg",
"1493772/images/image_5_compressed.jpg",
"1493772/images/image_6_compressed.jpg",
"1493772/images/image_7_compressed.jpg"
] | [
"1493772/stls/A1 - Corrected.stl",
"1493772/stls/A1 and B1 Enclosure Remix Corrected - FF.stl",
"1493772/stls/B1 - Corrected.stl"
] | CC-BY | https://www.printables.com/model/1493772 | data_0001.tar |
1482456 | AD5X Bezel and Stylus | <p><strong>AD5X Bezel and Stylus</strong></p><p>Improve your interaction with the touch screen with this stylus. Bezel adds character to your printer and serves as a holder for the stylus.</p> | [
"stylus",
"bezel",
"stylusholder",
"screenbezel",
"ad5x"
] | 3D Printers > Accessories | [
"1482456/images/image_1_compressed.jpg",
"1482456/images/image_2_compressed.jpg",
"1482456/images/image_3_compressed.jpg",
"1482456/images/image_4_compressed.jpg"
] | [
"1482456/stls/AD5X Bezel and Stylus.stl",
"1482456/stls/AD5X Bezel.stl",
"1482456/stls/AD5X Stylus.stl"
] | CC-BY | https://www.printables.com/model/1482456 | data_0001.tar |
1548599 | AD5X Cable Guide | Guides de hotend cable, without the need to use clips | Download free 3D printable STL models | [
"flashforge",
"ad5x"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1548599/images/image_1_compressed.jpg"
] | [
"1548599/stls/AD5X Cable Guide.stl"
] | CC-BY | https://www.printables.com/model/1548599 | data_0001.tar |
1458258 | AD5X drag chian | <p>When printing, use 4 wall and 15 infill </p><p>There is a chain kit x15 and 1 big chain </p><p>The big chain link will go on the last link before attaching to the rotating hot end</p><p>@@I have fixed the chain sagging by lifting up one of the connections@@@</p><p><strong>Back connection you will need 2x M... | [] | 3D Printers > Accessories | [
"1458258/images/image_1_compressed.jpg",
"1458258/images/image_2_compressed.jpg",
"1458258/images/image_3_compressed.jpg"
] | [
"1458258/stls/Back connection.stl",
"1458258/stls/big chain.stl",
"1458258/stls/Chain set x15.stl",
"1458258/stls/Connection to hot end.stl",
"1458258/stls/extruder connection.stl",
"1458258/stls/Support Chain Extruder Part 3.stl"
] | CC-BY | https://www.printables.com/model/1458258 | data_0001.tar |
1402107 | AD5X Enclosure Lid Angler | <p>These parts will keep the lid of your AD5X enclosure open while printing PLA & PETG. It fits the original enclosure and also the extended version. The supports of the channel for the lid is a little annoying to take out but with a little patience manageable. Have a door closed and clog free printing experience w... | [
"upgrade",
"part",
"accessory",
"ad5x"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1402107/images/image_1_compressed.jpg",
"1402107/images/image_2_compressed.jpg",
"1402107/images/image_3_compressed.jpg"
] | [
"1402107/stls/AD5XLidAngler.stl",
"1402107/stls/LidAngle01.stl",
"1402107/stls/LidAngle02.stl",
"1402107/stls/LidAnglerInlays.stl"
] | CC-BY | https://www.printables.com/model/1402107 | data_0001.tar |
1561682 | AD5X Enclosure Mod - Controlled Pass Through - IFS / PTFE | <p>This is best installed with the holes facing upward. </p><p><strong>Removing the Old One</strong></p><p>(Optional) You can remove the existing one quite easily, by popping it into the enclosure housing, and disconnecting the 4-in-1 PTFE connector from the extruder. It should then slide off.</p><p><strong... | [
"ifs",
"ad5x"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1561682/images/image_1_compressed.jpg",
"1561682/images/image_2_compressed.jpg",
"1561682/images/image_3_compressed.jpg"
] | [
"1561682/stls/ad5x_ptfe_enclosed_v5_main.stl"
] | CC0 | https://www.printables.com/model/1561682 | data_0001.tar |
1512904 | AD5X Poop Chute | <h3><strong>The AD5X Super Duper Pooper Chute collection</strong></h3><p><em>(see the edit from 12-21 below for additional detail)</em></p><p>This poop chute is my homage to the one FlashForge has on their site. It attaches to the pooper using the existing screws. It fits with or without the standard enclosure design f... | [
"ad5x",
"ad5xenclosure"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1512904/images/image_1_compressed.jpg",
"1512904/images/image_10_compressed.jpg",
"1512904/images/image_11_compressed.jpg",
"1512904/images/image_12_compressed.jpg",
"1512904/images/image_13_compressed.jpg",
"1512904/images/image_2_compressed.jpg",
"1512904/images/image_3_compressed.jpg",
"1512904/im... | [
"1512904/stls/AD5X-Large-Bin.stl",
"1512904/stls/AD5X-Poop-Chute-Lefty-No-Standoffs.stl",
"1512904/stls/AD5X-Poop-Chute-Lefty-Standoffs-5x2mm-magnet.stl",
"1512904/stls/AD5X-Poop-Chute-Righty-No-Standoffs.stl",
"1512904/stls/AD5X-Poop-Chute-Righty-Standoffs-5x2mm-magnet.stl",
"1512904/stls/AD5X-Poop-Chute... | CC0 | https://www.printables.com/model/1512904 | data_0001.tar |
1430378 | AD5X/AD5M Vent Cover With Cutout for Temp/Moisture Sensor | <p>NOTE: This design is a tight fit on purpose - You may need to de-burr or sand down the inner edges of the circle to get the sensor to fit (purely because it needs to be a tight fit due to vibrations etc)<br><br>A Vent cover for the AD5X/AD5M I modeled, this version has a circular cut out for a temp/moisture sensorA ... | [
"printer",
"part",
"sensor",
"cover",
"vent",
"flashforge",
"temprature",
"ad5m",
"ad5mpro",
"ad5x"
] | 3D Printers > Other Printer Parts & Upgrades | [
"1430378/images/image_1_compressed.jpg",
"1430378/images/image_2_compressed.jpg"
] | [
"1430378/stls/Vent Cover.stl"
] | CC0 | https://www.printables.com/model/1430378 | data_0001.tar |
1516403 | AD5X/AD5M/AD5M Pro Bowden Clip and Improved Fan Retainer | <p>The AD5X is a great machine but like any there are always little niggles which can be improved upon. </p><ol><li><p>The Bowden clip which retains the 4 in 1 filament feed tube is small and fiddly to remove. The model attached is longer and still fits behind the fan casing (it needs to be pivotted to the left).<... | [] | 3D Printers > Other Printer Parts & Upgrades | [
"1516403/images/image_1_compressed.jpg",
"1516403/images/image_2_compressed.jpg"
] | [
"1516403/stls/AD5X Clips.stl"
] | CC-BY | https://www.printables.com/model/1516403 | data_0001.tar |
98356 | Adafruit ADXL343 clip-on mount for Ender 3 V2 | <p>I've printed a custom fan duct for my Ender 3 V2 and I didn't want to re-print everything just to mount the ADXL onto it. Instead I got highly inspired by <a href="https://www.thingiverse.com/thing:3715002/files">this</a> drag chain mount. I designed my own based on this simply because I liked the idea to clip-on th... | [
"upgrade",
"ender3",
"ender3v2",
"ender3v2mods",
"upgradeender3v2",
"adxl343",
"adxl343mount"
] | 3D Printers > Creality Parts & Upgrades | [
"98356/images/image_1_compressed.jpg",
"98356/images/image_2_compressed.jpg",
"98356/images/image_3_compressed.jpg"
] | [
"98356/stls/ADXL mount.stl"
] | CC-BY | https://www.printables.com/model/98356 | data_0001.tar |
201845 | Adafruit ADXL345 Voron Stealthburner mount | <p>I didn't find a mount for an Adafruit ADXL for the stealthburner which has wider holes so I created this one. You will need 2 M3x60 screws for the mount and 2 M2x8 for the ADXL itself and 2 M2 nuts.</p><p>I hope it's useful for someone else ;)</p> | [
"adafruit",
"voron",
"adxl345",
"adxl345mount",
"stealthburner",
"adxl"
] | 3D Printers > Accessories | [
"201845/images/image_1_compressed.jpg",
"201845/images/image_2_compressed.jpg",
"201845/images/image_3_compressed.jpg"
] | [
"201845/stls/Adafruit ADXL Stealthburner.stl"
] | CC-BY | https://www.printables.com/model/201845 | data_0001.tar |
138045 | Adafruit Macropad Case | <p>Update: Added 3 versions - One with a hole for the STEMMA port, One with a hole for the STEMMA and Reset, and a last one that has space for a Pimoroni trackball.<br><br>This is a form fitting case I designed for the Adafruit Macropad. Its designed to be used with square keys but will probably work with regular... | [
"case",
"keycap",
"keyboard",
"adafruit",
"diyelectronics",
"macropad",
"mechanicalkeyboard",
"rotaryencoder",
"electronicsenclosure",
"rp2040",
"adafruitmacropad"
] | Gadgets > Computers | [
"138045/images/image_1_compressed.jpg"
] | [
"138045/stls/Cover.stl",
"138045/stls/Cover_No_Walls.stl",
"138045/stls/Foot.stl",
"138045/stls/Keycap_With_MaskSlot.stl",
"138045/stls/Macropad_StemmaAndReset.stl",
"138045/stls/Outer Case Stemma.stl",
"138045/stls/Outer Case Trackball.stl",
"138045/stls/Outer_Case_1.stl",
"138045/stls/Outer_Case_S... | CC-BY | https://www.printables.com/model/138045 | data_0001.tar |
713913 | Adaptable Pipette Holders | <h4>Pipette Holders</h4><p> </p><p>This modular holder was made to be able to resist the seismic conditions of Chile and is an easy-to-use holder for pipettes in general. We have designed multiple versions, all of them available here, to adapt the holder to most shelfs and surfaces. If you want to create your own ... | [
"holder",
"youtube",
"stand",
"online",
"flexible",
"sample",
"adapter",
"openscad",
"opensource",
"freecad",
"nosupport",
"openhardware",
"tutorial",
"onshape",
"earthquake",
"chile",
"adaptable",
"pipette",
"pipettestand",
"pipetteholder",
"librehub"
] | Learning > Chemistry & Biology | [
"713913/images/image_1_compressed.jpg",
"713913/images/image_2_compressed.jpg",
"713913/images/image_3_compressed.jpg",
"713913/images/image_4_compressed.jpg",
"713913/images/image_5_compressed.jpg"
] | [
"713913/stls/Base Cap - Silde Stand Pole.stl",
"713913/stls/Pole - Silde Stand Pole.stl",
"713913/stls/Slide Stand Pole.stl",
"713913/stls/Slider Base - Silde Stand Pole.stl",
"713913/stls/Top Pole - Silde Stand Pole.stl",
"713913/stls/Type A - Pipette Holder - Glued to wall.stl",
"713913/stls/Type A - ... | CC-BY | https://www.printables.com/model/713913 | data_0001.tar |
1529315 | Adaptation of MMU3 Cassette Compatible Buffer for Prusa CORE One + | <p>Adaptation of <a target="_blank" rel="noopener noreferrer nofollow" class="editor-link" href="https://www.printables.com/model/953614-mmu3-cassette-compatible-buffer-for-prusa-mk4-r4-c">MMU3 Cassette Compatible Buffer</a> for <strong>Prusa CORE One +</strong></p><p>After trying countless filament retraction systems ... | [
"buffer",
"cassette",
"mmu3",
"compatible",
"mmu3buffer",
"buffermount",
"coreone",
"coreoneplus"
] | 3D Printers > Prusa Parts & Upgrades | [
"1529315/images/image_1_compressed.jpg",
"1529315/images/image_2_compressed.jpg",
"1529315/images/image_3_compressed.jpg",
"1529315/images/image_4_compressed.jpg",
"1529315/images/image_5_compressed.jpg"
] | [
"1529315/stls/core-one-buffer-mount-bottom-support-LBl-RBb.stl",
"1529315/stls/core-one-buffer-mount-bottom-support-RBr-LBb.stl",
"1529315/stls/core-one-buffer-mount-top-LBb-12345.stl",
"1529315/stls/core-one-buffer-mount-top-LBb.stl",
"1529315/stls/core-one-buffer-mount-top-LBl-12345.stl",
"1529315/stls/... | GPL3.0 | https://www.printables.com/model/1529315 | data_0001.tar |
1559619 | Adaptator for Core One Plus spool holder | <p>The spool can get into bad position on the spool holder of the Core One plus.</p><p>With this adaptator the cardboard or the small spool stay right.</p><p>Out diameter 50mm</p> | [
"spoolholder",
"coreone"
] | 3D Printers > Prusa Parts & Upgrades | [
"1559619/images/image_1_compressed.jpg",
"1559619/images/image_2_compressed.jpg",
"1559619/images/image_3_compressed.jpg",
"1559619/images/image_4_compressed.jpg",
"1559619/images/image_5_compressed.jpg"
] | [
"1559619/stls/Spool Holder CoreOne Plus.stl"
] | CC0 | https://www.printables.com/model/1559619 | data_0001.tar |
477620 | Adapter 2kg Spool Holder (MK3/MK4) | <p>With this adapter you will be able using your default Prusa spool holder for 2kg spools (of 30cm diameter). Simple click system. No tools needed. Can be printed with PLA without support. Brim recommended.</p><p><strong>Please pay attention to the correct assembly. </strong>A single Ox logo should be on the <strong>f... | [
"mk3",
"spoolholder",
"mk3s",
"spoolmount",
"adapter",
"mk4",
"spooladapter",
"mk3splus",
"jobox"
] | 3D Printers > Accessories | [
"477620/images/image_1_compressed.jpg",
"477620/images/image_2_compressed.jpg",
"477620/images/image_3_compressed.jpg",
"477620/images/image_4_compressed.jpg",
"477620/images/image_5_compressed.jpg",
"477620/images/image_6_compressed.jpg"
] | [
"477620/stls/Spoolholder-adapter-2kg_Prusa-MK3-4_v01.stl"
] | CC0 | https://www.printables.com/model/477620 | data_0001.tar |
52132 | Adapter for the original prusa spool holder. (For enclosure mod) | <p>I created this adapter to still use the original prusa spool holder with my enclosure.</p>
| [
"holder",
"spoolholder",
"filamentspoolholder",
"filamentspool",
"adapter"
] | 3D Printers > Prusa Parts & Upgrades | [
"52132/images/image_1_compressed.jpg",
"52132/images/image_2_compressed.jpg",
"52132/images/image_3_compressed.jpg",
"52132/images/image_4_compressed.jpg",
"52132/images/image_5_compressed.jpg"
] | [
"52132/stls/prusa_filamentholder.stl"
] | CC-BY | https://www.printables.com/model/52132 | data_0001.tar |
1416539 | Adapter large hole (73 mm) spools to Flashforge AD5X spool holders. | <h3>Description</h3><p><br>When putting my standard filament from Jayo / Sunlu on the AD5X I get problems as the spool holder is about 56 mm while the Jayo spools are somewhere between 71 and 75 mm. I created a simple adapter to solve that problem. After I started use my adapter I found out that there are lots of adapt... | [] | 3D Printers > Other Printer Parts & Upgrades | [
"1416539/images/image_1_compressed.jpg",
"1416539/images/image_2_compressed.jpg",
"1416539/images/image_3_compressed.jpg"
] | [
"1416539/stls/sh adapter 72 mm.stl",
"1416539/stls/sh adapter 72_5 mm.stl",
"1416539/stls/sh adapter 73 mm.stl",
"1416539/stls/sh adapter 73_5 mm.stl",
"1416539/stls/sh adapter 74 mm.stl"
] | CC-BY | https://www.printables.com/model/1416539 | data_0001.tar |
1035759 | Adaptive purge for any 3D printer using slicer variables | <h3>Overview</h3><p>Based on KAMP by kyleisah: <a href="https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging">https://github.com/kyleisah/Klipper-Adaptive-Meshing-Purging</a></p><p>Part of KAMP is to adapt various printer functions to suit each individual print, rather than a global constant. For example only A... | [
"adaptive",
"purge",
"purgeline"
] | 3D Printers > Test Models | [
"1035759/images/image_1_compressed.jpg"
] | [
"1035759/stls/box.stl"
] | CC-BY | https://www.printables.com/model/1035759 | data_0001.tar |
304835 | AdBlue Wrench 17mm Audi A6 Handle Socket Tankdeckel Schraubaufsatz Handgriff |
<p>Small wrench for AdBlue lid</p>
<p>Fits for Audi A6 and others</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>I3 MK3S</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting supports"><strong>... | [
"wrench",
"socket",
"audi",
"thingiverse",
"socketwrench",
"hexwrench",
"adblue",
"tankdeckel"
] | Hobby & Makers > Automotive | [
"304835/images/image_1_compressed.jpg",
"304835/images/image_2_compressed.jpg",
"304835/images/image_3_compressed.jpg",
"304835/images/image_4_compressed.jpg"
] | [
"304835/stls/AdBlueWrench_-_Wrench17mm.stl"
] | CC-BY | https://www.printables.com/model/304835 | data_0001.tar |
49075 | Adblue Wrench for AUDI A6 | <p>This is a wrench for opening the Adblue cap of the Audi A6 (model C7).<br/>
You can spin it around continuously when opening or closing.</p>
<p>I have designed it because I did not want to use the wheel wrench which can provide too much torque and is too big to turn around continuously.</p>
<p>If you have another c... | [
"tool",
"wrench",
"car",
"tools",
"audi",
"thingiverse",
"adblue"
] | Hobby & Makers > Automotive | [
"49075/images/image_1_compressed.jpg",
"49075/images/image_2_compressed.jpg",
"49075/images/image_3_compressed.jpg"
] | [
"49075/stls/adblue-wrench_v100.stl"
] | CC-BY | https://www.printables.com/model/49075 | data_0001.tar |
381769 | Additional desiccant cases for Bambu Lab X1 AMS (for unpacked silica gel) | <p> </p><p>Easily removable & refillable desiccant cases for unpacked silica gel for the Bambulab X1 AMS.</p><figure class="image"><img src="https://media.printables.com/media/prints/381769/rich_content/1353b29e-8e77-441f-a595-4995862c0634/addimage00.png#%7B%22uuid%22%3A%22ea008396-8c58-4955-ac4b-e369abee69d7%... | [
"dessicant",
"silicagel",
"x1",
"bambulab",
"ams"
] | 3D Printers > Accessories | [
"381769/images/image_1_compressed.jpg",
"381769/images/image_2_compressed.jpg",
"381769/images/image_3_compressed.jpg"
] | [
"381769/stls/BambulabDessicantAddCaseForAMS.stl"
] | CC0 | https://www.printables.com/model/381769 | data_0001.tar |
389239 | Additional desiccant cases for Bambu Lab X1 AMS (for unpacked silica gel) with humidity sensor support. | <p>Easily removable & refillable desiccant cases for unpacked silica gel for the Bambulab X1 AMS. This is a second version of <a href="https://www.printables.com/model/381769-additional-desiccant-cases-for-bambu-lab-x1-ams-fo">this one</a>, I added caps & humidity sensor support.</p><figure class="image"><img s... | [
"sensor",
"humidity",
"dessicant",
"silicagel",
"bambulabx1",
"ams",
"bambulabs"
] | 3D Printers > Accessories | [
"389239/images/image_1_compressed.jpg",
"389239/images/image_2_compressed.jpg",
"389239/images/image_3_compressed.jpg",
"389239/images/image_4_compressed.jpg",
"389239/images/image_5_compressed.jpg"
] | [
"389239/stls/AdditionalCase.stl",
"389239/stls/AdditionalCaseCap.stl",
"389239/stls/AdditionalCaseCapSensor.stl"
] | CC0 | https://www.printables.com/model/389239 | data_0001.tar |
1464466 | ADHD Sign | <p>Please follow the txt instructions for pauses and filament changes. You can resize, but do not resize the height.<br><br>New Version 2.0 uploaded here : <a href="https://www.printables.com/model/1484506-adhd-sign-v2">https://www.printables.com/model/1484506-adhd-sign-v2</a></p> | [
"adhd",
"acdc",
"hueforge",
"hueforgeart"
] | Art & Design > Other Art & Designs | [
"1464466/images/image_1_compressed.jpg"
] | [
"1464466/stls/ADHD.stl",
"1464466/stls/ADHD_Front_186x92.stl"
] | CC0 | https://www.printables.com/model/1464466 | data_0001.tar |
324964 | Adhesive tape helper (50mm) | <p>Print in the orientation from the .stl file. It is not a trivial task to get sharp points out of a 3D printer, so if yours come out a bit blunt you could use a nail file (or similar) to sharpen the teeth. </p><p>Usage: stick it on your roll of tape, pull an end of it over the edge and tear off the excess. This ... | [
"end",
"adhesive",
"stickytape",
"tearoff"
] | Hobby & Makers > Tools | [
"324964/images/image_1_compressed.jpg",
"324964/images/image_2_compressed.jpg"
] | [
"324964/stls/tape_tearer-Body.stl"
] | CC0 | https://www.printables.com/model/324964 | data_0001.tar |
1705123 | Adhesive Trash Bag Holder – Wall-Mounted Organizer, No Drilling, Space-Saving & Durable | <p>Keep your space clean, organized, and efficient with this adhesive trash bag holder set. Designed for convenience, these wall-mounted holders let you store and dispense trash bags effortlessly—no tools or drilling required.</p> | [
"kitchen",
"organizer",
"3d",
"bag",
"home",
"utility",
"viral"
] | Household > Kitchen | [
"1705123/images/image_1_compressed.jpg",
"1705123/images/image_2_compressed.jpg",
"1705123/images/image_3_compressed.jpg"
] | [
"1705123/stls/soporte utiles cocina.stl"
] | CC-BY | https://www.printables.com/model/1705123 | data_0001.tar |
172901 | Adidas Superstars for Lucky 13 | Give your Lucky 13 figure the most comfortable shoes known to man!
Would recommend adding supports for the toe. | Download free 3D printable STL models | [] | Toys & Games > Action Figures & Statues | [
"172901/images/image_1_compressed.jpg"
] | [
"172901/stls/Superstar v1.stl"
] | CC0 | https://www.printables.com/model/172901 | data_0001.tar |
195041 | Adjustable Airplane Phone Holder | <p>I do a reasonable amount of flying for work and it has always been a pain holding or propping up my phone so I can watch movies. I tried some low-tech methods over the years but this design is my current solution.</p><p>I got inspiration for this from the following design <a href="https://www.thingiverse.com/thing:3... | [
"holder",
"phonestand",
"phone",
"smartphoneholder",
"openscad",
"airplane",
"travel",
"travelling"
] | Gadgets > Portable Devices | [
"195041/images/image_1_compressed.jpg",
"195041/images/image_2_compressed.jpg",
"195041/images/image_3_compressed.jpg"
] | [
"195041/stls/Knob.stl",
"195041/stls/Lower_Holder.stl",
"195041/stls/Mount.stl",
"195041/stls/Plane_phone_holder.stl",
"195041/stls/Retainer_Bracket.stl",
"195041/stls/Upper_Holder.stl"
] | CC-BY | https://www.printables.com/model/195041 | data_0001.tar |
134220 | Adjustable Anker Wireless charging dock | <p>This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally.</p><p>For very large phones, the movable holder can also be mounted upside down, so that even more space is available.</p><p> </p><p>The holder is suitable for the A... | [
"wirelesscharger",
"phonestand",
"phone",
"qicharger",
"qiwirelesscharger",
"chargingstation",
"anker"
] | Gadgets > Portable Devices | [
"134220/images/image_1_compressed.jpg",
"134220/images/image_2_compressed.jpg"
] | [
"134220/stls/Mount.stl",
"134220/stls/moveable_part.stl"
] | CC0 | https://www.printables.com/model/134220 | data_0001.tar |
286935 | Adjustable Bed Frame Leg | <p>You can print and use this to replace existing adjustable bed frame support, which is usually made of weak and thin material. I recommend to glue a piece of rubber to the foot to avoid any noise. </p><p>0.3mm, rPETG, 5h. </p> | [
"leg",
"support",
"furniture",
"bed",
"screw",
"repair",
"bedroom"
] | Household > Bedroom | [
"286935/images/image_1_compressed.jpg",
"286935/images/image_2_compressed.jpg"
] | [
"286935/stls/AdjustableBedFrameLeg_PetrVacek_F.stl",
"286935/stls/AdjustableBedFrameLeg_PetrVacek_M.stl",
"286935/stls/AdjustableBedLeg_PetrVacek.stl"
] | CC0 | https://www.printables.com/model/286935 | data_0001.tar |
105553 | Adjustable Book Display Stand | <p>A book or comic book display stand so you can proudly show off the best of your collection. Print two of the legs, and one horizontal bar as seen in the pictures, easily breaks down and comes together again making book display simple. </p> | [
"display",
"comics",
"marvel",
"dccomics",
"dc",
"marvelcomics",
"comicbooks",
"displaystand",
"books",
"bookstand"
] | Household > Home Decor | [
"105553/images/image_1_compressed.jpg",
"105553/images/image_2_compressed.jpg",
"105553/images/image_3_compressed.jpg"
] | [
"105553/stls/Book Stand_Brace.stl",
"105553/stls/Book Stand_LEG.stl"
] | CC-BY | https://www.printables.com/model/105553 | data_0001.tar |
345984 | Adjustable Bottle Cutter PET | <p>A bottle cutter that uses 608ZZ skateboard bearings (8x22x7mm), and US pennies or 5/16 washers to adjust the cut width.</p><p> </p><p>Parts</p><p>2, 608 bearings (8x22x7mm) (Grind at least one side flat to use as a shearing surface. I used an angle grinder and then a Dremel with a sanding head to smooth it out.... | [
"filament",
"pulltrusion",
"bottlecutter"
] | 3D Printers > Accessories | [
"345984/images/image_1_compressed.jpg",
"345984/images/image_2_compressed.jpg",
"345984/images/image_3_compressed.jpg"
] | [
"345984/stls/BottleCutter GuideV2B Tall.stl",
"345984/stls/BottleCutter GuideV2B.stl",
"345984/stls/BottleCutterV2B.stl"
] | CC-BY | https://www.printables.com/model/345984 | data_0001.tar |
38419 | Adjustable Camera Holder for Logitech C270 Ikea Lack / Einstellbare Kamerahalterung für Logitech C270 Ikea Lack | <p>This is a another holder for the Logitech C270 for Ikea Lack.</p>
<p>Dies ist ein weiterer Halter für die Logitech C270 für Ikea Lack.</p>
| [
"camera",
"ikea",
"ikealack",
"lack",
"c270",
"c270mount",
"logitechc270",
"ikealackenclosure"
] | 3D Printers > Other Printer Parts & Upgrades | [
"38419/images/image_1_compressed.jpg",
"38419/images/image_2_compressed.jpg"
] | [
"38419/stls/kamerahalterung-schiene2.stl",
"38419/stls/kamerahalterung-stift.stl",
"38419/stls/kamerahalterung.stl"
] | CC0 | https://www.printables.com/model/38419 | data_0001.tar |
1129836 | Adjustable circle cutter for clay | <p>Very easy to print.</p><p>The numbers indicate the radius.</p> | [
"tool",
"circle",
"adjustable",
"compass",
"clay",
"pottery",
"claycutters"
] | Art & Design > Other Art & Designs | [
"1129836/images/image_1_compressed.jpg",
"1129836/images/image_2_compressed.jpg",
"1129836/images/image_3_compressed.jpg"
] | [
"1129836/stls/Base_Circle.stl",
"1129836/stls/Ruler_10_Circle.stl"
] | CC-BY | https://www.printables.com/model/1129836 | data_0001.tar |
237418 | Adjustable Door Catch | <p>A simple-to-print door catch for many kinds of doors. Can be adjusted slightly in each direction to account for uneven screw holes. Printed this as a replacement for an ancient magnetic catch in our basement.</p><p>Printed in Pistachio Green PETG Prusament. Catch was printed on the side to have maximal stability and... | [
"household",
"stopper",
"cupboard"
] | Household > Other House Equipment | [
"237418/images/image_1_compressed.jpg"
] | [
"237418/stls/DoorCatch.stl",
"237418/stls/DoorCatch_Peg.stl"
] | CC-BY | https://www.printables.com/model/237418 | data_0001.tar |
288196 | Adjustable Door Hanger/Hook | <p>The Perfect Print for the Winter !</p><p>I designed 3 Versions for diffrent door Types so everyone can use it ;D. just download the Screw and the Size that fits you... | [] | Gadgets > Other Gadgets | [
"288196/images/image_1_compressed.jpg",
"288196/images/image_2_compressed.jpg"
] | [
"288196/stls/Hanger_Large.stl",
"288196/stls/Hanger_Medium.stl",
"288196/stls/Hanger_Small.stl",
"288196/stls/Screw.stl"
] | CC-BY | https://www.printables.com/model/288196 | data_0001.tar |
140599 | Adjustable filament roller. | <p>Made my own adjustable filament roller. Uses bearings for rollerblades 8 x 22 x 7 mm.</p> | [
"spool",
"filament",
"filamentspoolholder",
"roller",
"filamentholder",
"filamentroller"
] | 3D Printers > Accessories | [
"140599/images/image_1_compressed.jpg",
"140599/images/image_2_compressed.jpg"
] | [
"140599/stls/filament.bottom v4.stl",
"140599/stls/filament.bottom.over v3.stl",
"140599/stls/filament.side1.stl",
"140599/stls/filament.side2.stl"
] | CC0 | https://www.printables.com/model/140599 | data_0001.tar |
125762 | Adjustable Folding Phone Stand / Holder |
<p>Yes, here is my 100th template :-)</p>
<p>This is a modification of the template from :</p>
<p>"Adjustable Folding Phone Stand - Single piece print, built in hinges"<br/>
<a href="https://www.thingiverse.com/thing:3041592">https://www.thingiverse.com/thing:3041592</a></p>
<p>What else have I done?</p>
<ul>
<li>Th... | [
"holder",
"stand",
"spoolholder",
"phonestand",
"phone",
"adjustable",
"folding",
"cellphone",
"cell",
"smartphoneholder",
"thingiverse",
"cellphoneholder",
"cellphonestand"
] | Gadgets > Portable Devices | [
"125762/images/image_1_compressed.jpg",
"125762/images/image_2_compressed.jpg",
"125762/images/image_3_compressed.jpg",
"125762/images/image_4_compressed.jpg",
"125762/images/image_5_compressed.jpg",
"125762/images/image_6_compressed.jpg"
] | [
"125762/stls/Cell_Phone_Holder_Part_1.stl",
"125762/stls/Cell_Phone_Holder_Part_2.stl",
"125762/stls/Cell_Phone_Holder_Part_3.stl"
] | CC-BY | https://www.printables.com/model/125762 | data_0001.tar |
761560 | Adjustable Furniture Leg | <p>I remixed <a href="https://www.printables.com/@PetrVacek_20701">Petr Vacek@PetrVacek_20701</a>'s awesome model to accomodate my kitchen which needed new legs. Includes clips to attatch a plate beneath the kitchen cabinets, and also a wrench for easy tightening while the leg is under pressure. Recommend placing a clo... | [
"kitchen",
"leg",
"legs",
"foot",
"adjustable",
"height",
"adjustablefoot"
] | Household > Kitchen | [
"761560/images/image_1_compressed.jpg",
"761560/images/image_2_compressed.jpg",
"761560/images/image_3_compressed.jpg",
"761560/images/image_4_compressed.jpg"
] | [
"761560/stls/AdjustableLeg - Clip.stl",
"761560/stls/AdjustableLeg - Female.stl",
"761560/stls/AdjustableLeg - Male Short.stl",
"761560/stls/AdjustableLeg - Wrench.stl",
"761560/stls/AdjustableLegRemix.stl"
] | CC-BY | https://www.printables.com/model/761560 | data_0001.tar |
754489 | Adjustable GPU support/brace | <p>Modern graphic cards (ie: GeForce 4070 etc) are HUGE and heavy! Typically only well supported at the rear of the card where it is secured to the back of the case. This can put a LOT of strain on the PCI slot and the card can eventually sag and potentially damage your motherboard. You can buy brace... | [
"brace",
"support",
"gpu"
] | Gadgets > Computers | [
"754489/images/image_1_compressed.jpg",
"754489/images/image_2_compressed.jpg",
"754489/images/image_3_compressed.jpg",
"754489/images/image_4_compressed.jpg"
] | [
"754489/stls/GPU_Base_10x2_Magnet.stl",
"754489/stls/GPU_Base_12x3_Magnet.stl",
"754489/stls/GPU_Base_18x5_Magnet.stl",
"754489/stls/GPU_Base_No_Magnet.stl",
"754489/stls/Nut.stl",
"754489/stls/Threaded-Insert.stl"
] | CC0 | https://www.printables.com/model/754489 | data_0001.tar |
740037 | Adjustable PCB Holder Tool | <p>A handy tool to help with soldering, de-soldering, or other tasks where you need a steady third hand. This is a fully printable design, so no other hardware is required. With the largest base (as shown in the pictures) the clamping mechanism can be adjusted to accommodate boards up to 20 cm in length, an... | [
"soldering",
"clamp",
"pcb",
"solderingstation",
"pcbholder",
"clamping",
"solderingtool",
"circuitboard",
"clampingtools"
] | Hobby & Makers > Tools | [
"740037/images/image_1_compressed.jpg",
"740037/images/image_2_compressed.jpg",
"740037/images/image_3_compressed.jpg",
"740037/images/image_4_compressed.jpg",
"740037/images/image_5_compressed.jpg"
] | [
"740037/stls/Arm.stl",
"740037/stls/Base - 175 mm.stl",
"740037/stls/Base - 190 mm.stl",
"740037/stls/Base - 200 mm.stl",
"740037/stls/Base - 210 mm.stl",
"740037/stls/Base - 220 mm.stl",
"740037/stls/Base - 230 mm.stl",
"740037/stls/Base - 240 mm.stl",
"740037/stls/Base Knob.stl",
"740037/stls/Gr... | CC-BY | https://www.printables.com/model/740037 | data_0001.tar |
511959 | Adjustable Perfect Desktop Fan Stand (for 120 and 140mm fans) | <p>After I finished the <a href="https://www.printables.com/model/509810-simple-perfect-desktop-fan-stand-customizable">Simple Perfect Desktop Fan Stand</a> I wanted to make one that is adjustable. So here it is.</p><h3>Features</h3><ul><li>No Supports / Super easy print</li><li>The angle locks every 5 degrees</li><li>... | [
"fan",
"fanmount",
"heatwave"
] | Household > Office | [
"511959/images/image_1_compressed.jpg",
"511959/images/image_2_compressed.jpg",
"511959/images/image_3_compressed.jpg",
"511959/images/image_4_compressed.jpg",
"511959/images/image_5_compressed.jpg",
"511959/images/image_6_compressed.jpg",
"511959/images/image_7_compressed.jpg",
"511959/images/image_8... | [
"511959/stls/Base 140mm.stl",
"511959/stls/Base.stl",
"511959/stls/Base_with_Text.stl",
"511959/stls/Fan Bracket 140mm.stl",
"511959/stls/Fan Bracket.stl"
] | CC-BY | https://www.printables.com/model/511959 | data_0001.tar |
900843 | Adjustable Radius Tool (Parametric) | <p>If you need to copy the exact radius of a circular object, this tool is for you! </p><p>Place the tool against the object and tighten the screw to match the curve, then you can trace the same tool and replicate the radius exactly. </p><p>Perfect for:</p><ul><li>Tiling</li><li>Drywall</li><li>Furniture maki... | [
"tile",
"tool",
"circle",
"toilet",
"pipe",
"bathroom",
"adjustable",
"woodworking",
"plumbing",
"tube",
"gauge",
"stencil",
"template",
"radius",
"radiusgauge",
"replicator",
"draw",
"pvc",
"circular",
"tiling",
"drywall",
"pipes",
"diameter",
"copy",
"tracing",
"r... | Hobby & Makers > Tools | [
"900843/images/image_1_compressed.jpg",
"900843/images/image_2_compressed.jpg",
"900843/images/image_3_compressed.jpg",
"900843/images/image_4_compressed.jpg"
] | [
"900843/stls/Radius_Screw_Concave.stl",
"900843/stls/Radius_Screw_Concave_Large.stl",
"900843/stls/Radius_Screw_Convex.stl",
"900843/stls/Radius_Screw_Convex_Large.stl",
"900843/stls/Radius_Tool_Concave.stl",
"900843/stls/Radius_Tool_Concave_Large.stl",
"900843/stls/Radius_Tool_Convex.stl",
"900843/st... | CC-BY | https://www.printables.com/model/900843 | data_0001.tar |
168849 | Adjustable Router Plane | <p>Here's a video further explaining and demonstrating the tool:</p><figure class="media"><oembed url="https://youtu.be/JXpb81r2ULg"></oembed></figure><p>An adjustable router plane, inspired by the one designed by Paul Sellers, but can accept a chisel for the cutter, and with ergonomics similar to the Veritas large rou... | [
"plane",
"router",
"woodworking",
"tools",
"handtools",
"chisel",
"dado",
"tenon"
] | Hobby & Makers > Tools | [
"168849/images/image_1_compressed.jpg"
] | [
"168849/stls/Chisel_groove_insert.stl",
"168849/stls/Clamp_bar.stl",
"168849/stls/Hemispherical_washer.stl",
"168849/stls/M6_Depth_Adjustment_Wheel.stl",
"168849/stls/M6_Router_Plane_Body.stl",
"168849/stls/M6_Router_Plane_Body_Chisel_adjuster_clamp-16mm.stl",
"168849/stls/M6_Router_Plane_Body_Chisel_ad... | CC-BY | https://www.printables.com/model/168849 | data_0001.tar |
957332 | Adjustable sauce packet organizer | <p>It can fit around 22 packets of 36mm width each (height doesn't matter).</p><p>External size: 132.8 mm x 45.2 mm x 47 mm (height). </p><p>Print recommendations:</p><ul><li>15% infill</li><li>0,2 mm layer</li><li>no suports</li></ul><p>Original model created using onshape, and you can find it here and change as ... | [
"saucer",
"ketchup",
"packet",
"sachet",
"mustard",
"mayonnaise"
] | Household > Kitchen | [
"957332/images/image_1_compressed.jpg",
"957332/images/image_2_compressed.jpg"
] | [
"957332/stls/Divider.stl",
"957332/stls/main box.stl"
] | CC0 | https://www.printables.com/model/957332 | data_0001.tar |
38549 | Adjustable Seam Allowance Marker to speed up sewing patternmaking | <p>This adjustable doohickey allows you to quickly add seam allowance to sewing patterns. You can change it to use whatever width you are using using the screw on the side. It uses M3 hardware.</p>
<p>This is just my first go, I think I want to add a second wheel for stability and some kind of pensioner for the pen ins... | [
"tool",
"sewing",
"thingiverse",
"patternmaking",
"sewingaid"
] | Hobby & Makers > Tools | [
"38549/images/image_1_compressed.jpg",
"38549/images/image_2_compressed.jpg",
"38549/images/image_3_compressed.jpg"
] | [
"38549/stls/billiesseamalowancemarkermainjig.stl",
"38549/stls/billiesseamalowancemarkerpost.stl",
"38549/stls/billiesseamalowancemarkerwheel.stl"
] | CC-BY | https://www.printables.com/model/38549 | data_0001.tar |
417204 | Adjustable Skadis phone mount | <p>I use an old phone with Alfred camera app to monitor my printing progress when away. I needed something that was small, mountable to my Ikea Skadis board, and adjustable in different angles. Unfortunately, none of the existing models fitted all my criteria, so I decided to have a go at it myself. I mixed and edited ... | [
"camera",
"ikea",
"holder",
"mount",
"phonestand",
"phone",
"skadis",
"phoneholder"
] | Hobby & Makers > Organizers | [
"417204/images/image_1_compressed.jpg",
"417204/images/image_2_compressed.jpg",
"417204/images/image_3_compressed.jpg",
"417204/images/image_4_compressed.jpg",
"417204/images/image_5_compressed.jpg",
"417204/images/image_6_compressed.jpg",
"417204/images/image_7_compressed.jpg",
"417204/images/image_8... | [
"417204/stls/Clip_bolt.stl",
"417204/stls/Clip_bottom.stl",
"417204/stls/Clip_top.stl",
"417204/stls/Grouped_buildplate.stl",
"417204/stls/Joint.stl",
"417204/stls/Joint_bolt.stl",
"417204/stls/Nut.stl",
"417204/stls/Skadis_mount.stl"
] | CC0 | https://www.printables.com/model/417204 | data_0001.tar |
17674 | Adjustable Spool Holder | <p>This is a fully adjustable spool holder designed to be screwed down onto your enclosure. It can take spools from 40mm to 180mm width (almost any spool you can find on the market!). A gear system links the left and right side together, if you move one side the other moves as well. I recommend you use some kind of fil... | [
"filament",
"spoolholder",
"filamentspoolholder",
"filamentspool",
"adjustable",
"608bearing",
"universal",
"filamentholder"
] | 3D Printers > Accessories | [
"17674/images/image_1_compressed.jpg",
"17674/images/image_2_compressed.jpg",
"17674/images/image_3_compressed.jpg",
"17674/images/image_4_compressed.jpg"
] | [
"17674/stls/bottom-plate.stl",
"17674/stls/gear-thicc.stl",
"17674/stls/gear-thin.stl",
"17674/stls/rack.stl",
"17674/stls/roller.stl",
"17674/stls/side-plate.stl",
"17674/stls/top-plate.stl"
] | CC-BY | https://www.printables.com/model/17674 | data_0001.tar |
104007 | Adjustable Spool Holder - FLSUN QQ (608 zz bearings) |
<p>There are already several re-mixes of this spool holder for the FLSUN QQ, but none support the 608 zz bearings I already have. The only difference from the original are 2 holes for m4 screws that are used to mount it to the top of the printer. I copied the spacing from another remix and it lines up perfectly.</p>
<... | [
"filament",
"spoolholder",
"thingiverse",
"fillamentholder",
"flsunqq"
] | 3D Printers > Accessories | [
"104007/images/image_1_compressed.jpg",
"104007/images/image_2_compressed.jpg",
"104007/images/image_3_compressed.jpg",
"104007/images/image_4_compressed.jpg",
"104007/images/image_5_compressed.jpg",
"104007/images/image_6_compressed.jpg"
] | [
"104007/stls/knob.stl",
"104007/stls/screw.stl",
"104007/stls/spool-holder-base-FLSUN-QQ.stl",
"104007/stls/spool-slider.stl"
] | CC-BY | https://www.printables.com/model/104007 | data_0001.tar |
32949 | Adjustable Spool Holder Update | <p>This is an upgade using ball bearings to the original adjustable spool holder for the Prusa MK3S enclosure ( https://www.printables.com/model/17-original-prusa-i3-mk3-enclosure-ikea-lack-table-pr ). They fit right into the original part, replacing the plastic bearings, so you do not need to reprint anything.</p><h3>... | [
"ikeaenclosure",
"spoolholder",
"printerupgrade",
"ballbearing"
] | 3D Printers > Other Printer Parts & Upgrades | [
"32949/images/image_1_compressed.jpg",
"32949/images/image_2_compressed.jpg",
"32949/images/image_3_compressed.jpg",
"32949/images/image_4_compressed.jpg"
] | [
"32949/stls/bearingholder1.stl",
"32949/stls/bearingholder2.stl",
"32949/stls/bearingwheel.stl"
] | CC-BY | https://www.printables.com/model/32949 | data_0001.tar |
350275 | Adjustable Stadia Controller Phone Mount - Improved | <p>*NOTE - as these controllers are now irreplaceable, wanted to have full disclosure on the type of wear this print will likely put on your controller. Please see my latest comment for pics of my personal controller.</p><p> </p><p>Loved Cabanon's design and decided to improve upon it.</p><p>Added the ability to u... | [
"thingiverse",
"stadia",
"stadiacontroller"
] | Gadgets > Other Gadgets | [
"350275/images/image_1_compressed.jpg",
"350275/images/image_10_compressed.jpg",
"350275/images/image_11_compressed.jpg",
"350275/images/image_12_compressed.jpg",
"350275/images/image_13_compressed.jpg",
"350275/images/image_14_compressed.jpg",
"350275/images/image_15_compressed.jpg",
"350275/images/i... | [
"350275/stls/Build_Plate_Angled+LongWhat_I_Recommend_Printing.stl",
"350275/stls/Build_Plate_Long.stl",
"350275/stls/Build_Plate_Standard.stl",
"350275/stls/large_display_build_plate_long_350275.stl",
"350275/stls/large_display_stadia_controller_clip_banded_angled_350275.stl",
"350275/stls/large_display_s... | CC-BY | https://www.printables.com/model/350275 | data_0001.tar |
103238 | Adjustable Support |
<p>In my work, I needed to make such spacers that temporarily held the element for subsequent fixing. In general, I thought maybe someone else will come in handy. The scope of application is very wide. You can use it as a clamp, or you can replace the broken leg of the sofa.<br/>
Be careful, here the right and left t... | [
"support",
"spacer",
"thingiverse",
"struts",
"bracing",
"backstop"
] | Hobby & Makers > Tools | [
"103238/images/image_1_compressed.jpg",
"103238/images/image_10_compressed.jpg",
"103238/images/image_11_compressed.jpg",
"103238/images/image_12_compressed.jpg",
"103238/images/image_13_compressed.jpg",
"103238/images/image_2_compressed.jpg",
"103238/images/image_3_compressed.jpg",
"103238/images/ima... | [
"103238/stls/Connecting_Coupling.stl",
"103238/stls/Left_Sk.stl",
"103238/stls/Right_Sk.stl",
"103238/stls/Spacer_110-146.stl",
"103238/stls/Spacer_140-176.stl",
"103238/stls/Spacer_170-206.stl",
"103238/stls/Spacer_200-236.stl",
"103238/stls/Spacer_80-116.stl"
] | CC-BY | https://www.printables.com/model/103238 | data_0001.tar |
687985 | Adjustable Tablet Stand | <h4>Print Settings</h4><ul><li>Printer brand: Bambulabs</li><li>Printer: Bambu P1P</li><li>Rafts: No</li><li>Supports: No</li><li>Resolution: Nozzle 0.40mm / Layer Height 0.20mm</li><li>Infill: Gyroid 15%</li><li>Filament brand: AzureFilm</li><li>Filament color: Neon Red</li><li>Filament material: PLA</li><li>Notes: Pr... | [
"stand",
"galaxy",
"ipad",
"adjustable",
"tablet",
"tab"
] | Gadgets > Portable Devices | [
"687985/images/image_1_compressed.jpg",
"687985/images/image_2_compressed.jpg",
"687985/images/image_3_compressed.jpg",
"687985/images/image_4_compressed.jpg",
"687985/images/image_5_compressed.jpg",
"687985/images/image_6_compressed.jpg",
"687985/images/image_7_compressed.jpg",
"687985/images/image_8... | [
"687985/stls/tablet_stand_v20231220.stl"
] | CC-BY | https://www.printables.com/model/687985 | data_0001.tar |
253166 | Adjustable Thermometer bracket for Original Prusa Enclosure | <p>Printable accessory developed specifically to enable you better viewing angles with Adjustable Thermometer bracket<strong> </strong>on your Original Prusa Enclosure.</p><p> </p><p>To mount the Adjustable Thermometer bracket you will need the following fasteners*:</p><ul><li>M3x8 screw (2x)</li></ul><p><i>* The ... | [
"mk3s",
"originalprusaenclosure"
] | 3D Printers > Accessories | [
"253166/images/image_1_compressed.jpg",
"253166/images/image_2_compressed.jpg"
] | [
"253166/stls/Thermometer-A.stl",
"253166/stls/Thermometer-B.stl"
] | GPL2.0 | https://www.printables.com/model/253166 | data_0001.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.