model_id stringlengths 1 7 | name stringlengths 2 210 | description stringlengths 0 253k | tags listlengths 0 494 | printables_category stringclasses 80
values | image_paths listlengths 0 289 | stl_paths listlengths 0 2.73k | license stringclasses 7
values | source stringlengths 34 40 | shard_file stringclasses 49
values |
|---|---|---|---|---|---|---|---|---|---|
290154 | Amazfit Bip U Charging Stand | <p>A little holder for the watch :)</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender 3</p></div>
<p><strong>Rafts:</strong></p>
<p>No</p>
<p class="detail-setting supports"><strong>Supports: </strong>
<div><p>Ye... | [
"stand",
"smartwatch",
"chargingdock",
"thingiverse",
"amazfit"
] | Hobby & Makers > Other Ideas | [
"290154/images/image_1_compressed.jpg",
"290154/images/image_2_compressed.jpg",
"290154/images/image_3_compressed.jpg",
"290154/images/image_4_compressed.jpg",
"290154/images/image_5_compressed.jpg"
] | [
"290154/stls/Suporte_Amazfit_Bip_U_v2.stl"
] | CC0 | https://www.printables.com/model/290154 | data_0002.tar |
63200 | Amazfit GTS 2 mini Stand | <p>This is a stand made for the Amazfit GTS 2 mini smartwatch.</p><p>It print correctly on the side, without support, with 0.2mm layer height. </p><p>The base of the stand is a bit too light, mine is double face taped on my desk.</p><p>Made with onshape : <a href="https://cad.onshape.com/documents/88f5e822587a2c47... | [
"stand",
"watch",
"amazfit",
"gts2mini"
] | Costumes & Accessories > Props | [
"63200/images/image_1_compressed.jpg",
"63200/images/image_2_compressed.jpg",
"63200/images/image_3_compressed.jpg"
] | [
"63200/stls/Gts 2 mini Stand.stl"
] | CC0 | https://www.printables.com/model/63200 | data_0002.tar |
446922 | Amazfit GTS 3 charging station | This fits the charger for the amazfit gts 3 for easy charging | Download free 3D printable STL models | [
"smartwatchstand",
"watch",
"amazfit"
] | Gadgets > Portable Devices | [
"446922/images/image_1_compressed.jpg",
"446922/images/image_2_compressed.jpg",
"446922/images/image_3_compressed.jpg"
] | [
"446922/stls/watch charger amazfit 3.stl"
] | CC0 | https://www.printables.com/model/446922 | data_0002.tar |
19775 | Amazfit GTS Charging Stand | <p>This is a charging stand for the Amazfit GTS smart watch. You may need to lightly sand the hole where the charger pushes in from behind to make it a better fit.</p>
<p>It needs to be tight but not so much it damages the charger. It will depend on your printer tolerances.</p>
<p>Print it on its side with supports in ... | [
"thingiverse"
] | Household > Bedroom | [
"19775/images/image_1_compressed.jpg",
"19775/images/image_2_compressed.jpg"
] | [
"19775/stls/amazfit_gts_charging_stand.stl"
] | CC-BY | https://www.printables.com/model/19775 | data_0002.tar |
95046 | Amazfit GTS Stand | This is a Charging-Stand for the Amazefit GTS
Required are 4x 2,5x8mm spax screw | Download free 3D printable STL models | [
"gts",
"amazfit"
] | Gadgets > Portable Devices | [
"95046/images/image_1_compressed.jpg",
"95046/images/image_2_compressed.jpg"
] | [
"95046/stls/gts_fuss_petg_schwarz.stl",
"95046/stls/gts_halter_petg_schwarz.stl"
] | CC0 | https://www.printables.com/model/95046 | data_0002.tar |
788192 | amazfit T-REX 2 charger holder | <p>En</p><p>This stand for charging smart watch is primary made for amazfit t-rex 2. It is compounded from 3 main parts: base, support and charger holder. Charger holder and support are connected by screw M4x10-12mm with countersunk head. Support and base are connected by screw M4x10-12mm with cilinder inbus head. Both... | [
"holder",
"stand",
"charger",
"watch",
"hodinky"
] | Hobby & Makers > Electronics | [
"788192/images/image_1_compressed.jpg",
"788192/images/image_2_compressed.jpg",
"788192/images/image_3_compressed.jpg",
"788192/images/image_4_compressed.jpg",
"788192/images/image_5_compressed.jpg",
"788192/images/image_6_compressed.jpg"
] | [
"788192/stls/base.stl",
"788192/stls/charger holder.stl",
"788192/stls/support L.stl",
"788192/stls/support R.stl",
"788192/stls/support.stl"
] | CC0 | https://www.printables.com/model/788192 | data_0002.tar |
677887 | Amazfit T-REX 2 wristband free loop | <p>Amazfit T-Rex 2 wristband free loop replacement.</p><p>Print with TPU, full perimeters. </p><p>Try experimenting without supports. There are two versions of free loop wit inner pin, one with chamfered inner pin for easier printing without supports.</p><p> </p><p>If you want to support my work you can <a hr... | [
"replacement",
"watch",
"wristband",
"amazfit",
"trex2",
"freeloop"
] | Fashion > Other Fashion Accessories | [
"677887/images/image_1_compressed.jpg",
"677887/images/image_2_compressed.jpg"
] | [
"677887/stls/amazfit-T-Rex-2-free-loop-w-inside-pin-chamfered.stl",
"677887/stls/amazfit-T-Rex-2-free-loop-w-inside-pin.stl",
"677887/stls/amazfit-T-Rex-2-free-loop.stl"
] | CC-BY | https://www.printables.com/model/677887 | data_0002.tar |
10461 | Amazing Grace Cross | <p>I am a church Pastor and wanted to make something for my office and something for my home.</p>
<h3>Print instructions</h3><p>Unassociated tags: amazing grace<br/>
Category: Decor</p> | [
"cross",
"church",
"thingiverse",
"jesus"
] | Household > Home Decor | [
"10461/images/image_1_compressed.jpg",
"10461/images/image_2_compressed.jpg",
"10461/images/image_3_compressed.jpg",
"10461/images/image_4_compressed.jpg",
"10461/images/image_5_compressed.jpg",
"10461/images/image_6_compressed.jpg",
"10461/images/image_7_compressed.jpg",
"10461/images/image_8_compres... | [
"10461/stls/amazing_grace_cross.stl",
"10461/stls/amazing_grace_cross_2.stl",
"10461/stls/amazing_grace_cross_2_solid.stl",
"10461/stls/amazing_grace_cross_3.stl",
"10461/stls/amazing_grace_cross_3_solid.stl"
] | CC-BY | https://www.printables.com/model/10461 | data_0002.tar |
116422 | Amazon Echo Dot 3rd Gen Basic Wall Holder | <p>Amazon Alexa Echo Dot 3rd Gen basic wall mount.</p><p>Secure with two No6 countersunk screws</p> | [
"amazon",
"alexa",
"dot"
] | Household > Other House Equipment | [
"116422/images/image_1_compressed.jpg"
] | [
"116422/stls/EchoDot3_WalMount.stl"
] | CC0 | https://www.printables.com/model/116422 | data_0002.tar |
130607 | Amazon Echo Dot 3rd gen Tie Fighter | <p>Tie fighter made to hold Alexa Dot 2 may work with Dot 1 as well but dont have one to test. Working on finishing the version for the newest dot as well. designed the wings to lock into place and use 2 screws each side m2x8mm. The wings are printed in 4 pieces for each side 2 outside and to inside so they can be laid... | [
"starwars",
"thingiverse",
"tiefighter",
"echodot3"
] | Hobby & Makers > Other Ideas | [
"130607/images/image_1_compressed.jpg",
"130607/images/image_10_compressed.jpg",
"130607/images/image_11_compressed.jpg",
"130607/images/image_12_compressed.jpg",
"130607/images/image_13_compressed.jpg",
"130607/images/image_14_compressed.jpg",
"130607/images/image_15_compressed.jpg",
"130607/images/i... | [
"130607/stls/tie_fighter_AlexaCockpit.stl",
"130607/stls/tie_fighter_Alexa_center_Cockpit_1.stl",
"130607/stls/tie_fighter_Alexa_center_Cockpit_2.stl",
"130607/stls/tie_fighter_Alexa_coupler.stl",
"130607/stls/tie_fighter_Alexa_coupler_2.stl",
"130607/stls/tie_fighter_Alexa_front_Cockpit.stl",
"130607/s... | CC-BY | https://www.printables.com/model/130607 | data_0002.tar |
23375 | Amazon Echo Dot V3 - Socket Mount | <p>I did like the original design, but I did not like the support in between.<br/>
Now there is a two part version which prints with minimal support or even without.</p>
<p>Just screw the two parts together with M3 screws and M3x5mm brass inserts.</p>
<p>I have also added a distance block for support of the lower part... | [
"thingiverse"
] | Gadgets > Audio | [
"23375/images/image_1_compressed.jpg"
] | [
"23375/stls/echo_dot_v3_mount.stl",
"23375/stls/echo_dot_v3_mount_body.stl",
"23375/stls/echo_dot_v3_mount_distance_block.stl"
] | CC-BY | https://www.printables.com/model/23375 | data_0002.tar |
338552 | Amazon Echo Show 5 (gen2) under counter mount | <p>Wanted to mount my echo show 5 under kitchen counter but couldn't find the style I wanted so created one. Thanks to Dan for the Echo Show 5 model (https://www.printables.com/model/35715-amazon-echo-show-5-model) which is where all the work comes from.</p><p>Printer settings (PLA)</p><ul><li>0.2mm layer height</li><l... | [
"mount",
"echoshow5",
"amazonechoshow5",
"undercounter"
] | Household > Kitchen | [
"338552/images/image_1_compressed.jpg",
"338552/images/image_2_compressed.jpg",
"338552/images/image_3_compressed.jpg",
"338552/images/image_4_compressed.jpg"
] | [
"338552/stls/echoshow5 mount.stl"
] | CC-BY | https://www.printables.com/model/338552 | data_0002.tar |
389634 | Amazon Echo Show 8 Stand | <p>Stand for Amazon Echo Show 8.</p>
<p>Remix of Base.stl from <a href="https://www.thingiverse.com/thing:4100300">https://www.thingiverse.com/thing:4100300</a></p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Printrbot</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p><a hre... | [
"stand",
"amazonechoshow",
"thingiverse",
"displaystand",
"echoshow8",
"amazonechoshow8",
"echoshow8stand"
] | Hobby & Makers > Electronics | [
"389634/images/image_1_compressed.jpg"
] | [
"389634/stls/stand.stl"
] | CC-BY | https://www.printables.com/model/389634 | data_0002.tar |
413213 | Amazon Fire TV Netflix Remote - Holder | <p>Just a holder for the newest Fire TV remote. Just stick double-sided tape on another side :)</p><p>No Supports, 15% Infill, PLA, super simple :)</p> | [
"holder",
"fire",
"amazon",
"tv",
"remote",
"netflix",
"firetv"
] | Gadgets > Photo & Video | [
"413213/images/image_1_compressed.jpg",
"413213/images/image_2_compressed.jpg",
"413213/images/image_3_compressed.jpg",
"413213/images/image_4_compressed.jpg"
] | [
"413213/stls/amzn-firetv-remote-netflix.stl"
] | CC-BY | https://www.printables.com/model/413213 | data_0002.tar |
496547 | Ambiguous Cylinder Generator | <p>This is my Ambiguous Cylinder Generator to create Illusions based on the <a href="https://www.youtube.com/watch?v=oWfFco7K9v8">"Ambiguous Cylinder illusion"</a> by Kokichi Sugihara.</p><p>Use OpenSCAD to customize to your liking!</p><p>Have fun and share a make if you print one!</p><p>Changelog:</p><ul><li>v1.4: Pre... | [
"customizer",
"openscad",
"generator",
"thingiverse",
"opticalillusion",
"mathart",
"illusion",
"ambiguouscylinder",
"ambiguous"
] | Art & Design > Other Art & Designs | [
"496547/images/image_1_compressed.jpg",
"496547/images/image_2_compressed.jpg",
"496547/images/image_3_compressed.jpg",
"496547/images/image_4_compressed.jpg",
"496547/images/image_5_compressed.jpg"
] | [
"496547/stls/ambicylinder_3by2_v1.4.stl",
"496547/stls/ambi_1.stl",
"496547/stls/ambi_4.stl",
"496547/stls/ambi_4_v1.4.stl"
] | CC-BY | https://www.printables.com/model/496547 | data_0002.tar |
979408 | AMD/INTEL CPU Display Stand | <p>Showcase your CPU on your desk.<br>Display either the Heatspreader or the Pins/Pads.</p><p>The AM4 Stand works for CPUs of Sockets AM2 and later as the Dimensions have not really changed.</p><p>The Intel Stand should work for all LGA Models as the CPU Dimensions also have not really changed.</p><p>You can print the ... | [
"display",
"desk",
"desktop",
"stand",
"computer",
"gadget",
"gadgets",
"pc",
"server",
"computing",
"cpu",
"decorative",
"processor",
"technology",
"am4",
"ryzen",
"amd",
"am5"
] | Gadgets > Computers | [
"979408/images/image_1_compressed.jpg",
"979408/images/image_2_compressed.jpg",
"979408/images/image_3_compressed.jpg"
] | [
"979408/stls/Stand_AM4.stl",
"979408/stls/Stand_AM5.stl",
"979408/stls/Stand_INTEL_LGA1700.stl",
"979408/stls/Stand_INTEL_new_logo.stl",
"979408/stls/Stand_INTEL_old_logo.stl"
] | CC-BY | https://www.printables.com/model/979408 | data_0002.tar |
660442 | American Flag for Shuttle Endeavour | Replaces the “USA” block on the right wing of the shuttle with a simplified American Flag. This model is designed for an MMU or other multicolor printing system. | [
"shuttle",
"americanflag"
] | Toys & Games > Other Toys & Games | [
"660442/images/image_1_compressed.jpg"
] | [
"660442/stls/Blue.stl",
"660442/stls/red.stl",
"660442/stls/white.stl"
] | CC-BY | https://www.printables.com/model/660442 | data_0002.tar |
203042 | amiibo - NFC tokens - Super Smash Bros. series (all 91 characters) | <p>Highly collectible 3D printable NFC tokens for use with Nintendo video game consoles. Designs for all 91 amiibos in the Smash Bros. series.</p><p>Note: Prints in one part! You're expected to insert the NFC tag halfway through the print. No gluing, seamless finish.</p><p> </p><h3>Video Build Guide</h3><figure cl... | [
"snake",
"pikachu",
"mario",
"joker",
"nintendo",
"switch",
"zelda",
"link",
"hero",
"steve",
"cloud",
"wolf",
"falcon",
"pacman",
"richter",
"jigglypuff",
"megaman",
"peach",
"ryu",
"fox",
"diddy",
"sonic",
"nfc",
"rob",
"yoshi",
"robin",
"bowser",
"pit",
"am... | Toys & Games > Action Figures & Statues | [
"203042/images/image_1_compressed.jpg"
] | [
"203042/stls/smash_alex.stl",
"203042/stls/smash_banjo.stl",
"203042/stls/smash_bayonetta.stl",
"203042/stls/smash_bowser.stl",
"203042/stls/smash_bowserjr.stl",
"203042/stls/smash_byleth.stl",
"203042/stls/smash_charizard.stl",
"203042/stls/smash_chrom.stl",
"203042/stls/smash_cloud.stl",
"203042... | GPL3.0 | https://www.printables.com/model/203042 | data_0002.tar |
18974 | Amiibo Coin | <p>This should fit 25mm stickers. Measured the sticker space to 26mm, with a total diameter of 28mm for the coin.</p>
| [
"coin",
"nintendo",
"nintendoswitch",
"amiibo"
] | Toys & Games > Other Toys & Games | [
"18974/images/image_1_compressed.jpg"
] | [
"18974/stls/amiibo_coin.stl"
] | CC0 | https://www.printables.com/model/18974 | data_0002.tar |
542002 | Ammo box 30-06 | <p>I got a request for a 30-06 Ammo box and there are more people asking for it and also someone who thought the previous lid was too tight for their ammo. The reason was that I made it tight for the Norma ammo my friend used so it wouldn't rattle. But now I made it 86.10mm x 12.60mm so there should be room for more br... | [
"ammo",
"ammunition",
"ammobox",
"ammocrate",
"ammunitionbox",
"ammocase",
"ammocans"
] | Sports & Outdoor > Outdoor Sports | [
"542002/images/image_1_compressed.jpg",
"542002/images/image_10_compressed.jpg",
"542002/images/image_11_compressed.jpg",
"542002/images/image_12_compressed.jpg",
"542002/images/image_13_compressed.jpg",
"542002/images/image_14_compressed.jpg",
"542002/images/image_15_compressed.jpg",
"542002/images/i... | [
"542002/stls/Bottom.stl",
"542002/stls/Hinge.stl",
"542002/stls/hinge_looser.stl",
"542002/stls/Insert.stl",
"542002/stls/Latch arm.stl",
"542002/stls/Latch cam.stl",
"542002/stls/latch_arm_looser (1).stl",
"542002/stls/Top Clean.stl",
"542002/stls/Top Howa.stl",
"542002/stls/Top Josh.stl",
"542... | CC-BY | https://www.printables.com/model/542002 | data_0002.tar |
195133 | Ammo box 5.56-.223 | <p>50 count storage box. two potential lids. the recessed lid is thicker on the side to reinforce the track. the tray may be modified and published later.</p>
<h3>Print Settings</h3>
<p><strong>Resolution:</strong></p>
<p>.2</p>
<p class="detail-setting infill"><strong>Infill: </strong>
<div><p>20</p></div>
<p><strong>... | [
"ar15",
"rifle",
"thingiverse",
"ammobox"
] | Sports & Outdoor > Other Sports | [
"195133/images/image_1_compressed.jpg",
"195133/images/image_2_compressed.jpg",
"195133/images/image_3_compressed.jpg",
"195133/images/image_4_compressed.jpg"
] | [
"195133/stls/lid.recessed.stl",
"195133/stls/lidSquare.stl",
"195133/stls/traySquare.beveled.stl"
] | CC-BY | https://www.printables.com/model/195133 | data_0002.tar |
558313 | Ammunition box 9mm | <p>Ammuntion Box - 9mm</p><p> </p><p>Krabicka na 9mm naboje</p><p>Velice jednoduche na tisk, vejde se do ni 3x 50 kusove puvodni plato s krabicky na naboje, neni tedy nutne prekladat naboj po naboji.</p><p> </p> | [
"box",
"gun",
"ammunition",
"9mm",
"krabicka",
"naboje"
] | Sports & Outdoor > Other Sports | [
"558313/images/image_1_compressed.jpg",
"558313/images/image_2_compressed.jpg",
"558313/images/image_3_compressed.jpg"
] | [
"558313/stls/AmmoBox_Bottom_Part.stl",
"558313/stls/AmmoBox_Upper_Part.stl"
] | GPL3.0 | https://www.printables.com/model/558313 | data_0002.tar |
157588 | Amogus but scaled, rotated, and flattened | <p>I found that the original model was very small, rotated, and not flat on the bottom, so I fixed all of that in this model so printing is easier</p><p>You won't need supports for the model if you are printing them small</p><p>Remix of <a href="https://www.thingiverse.com/thing:5145842">https://www.thingiverse.com/thi... | [
"thingiverse",
"asus",
"amongus",
"among",
"sus",
"amongusgame",
"videojuegoamongus",
"amogus",
"amongushats",
"sussy"
] | Art & Design > Sculptures | [
"157588/images/image_1_compressed.jpg"
] | [
"157588/stls/AMOGUS.stl"
] | CC-BY | https://www.printables.com/model/157588 | data_0002.tar |
97681 | Among Us - cookie cutter | <p>Make some SUSSY cookies with this cutter! Simply print this model and you are ready to roll. Happy holidays!</p> | [
"cookiecutter"
] | Household > Kitchen | [
"97681/images/image_1_compressed.jpg"
] | [
"97681/stls/among us final.stl"
] | CC0 | https://www.printables.com/model/97681 | data_0002.tar |
340139 | Among Us - Heavy Duty Keychain |
<p>An Among Us keychain, with the key ring beefed up to make it stronger. Print it at about 150%, for a good keychain size.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Prusa</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>I3 MK3S</p></div>
<p><strong>Rafts:</strong>... | [
"thingiverse",
"amongus",
"amongusgame"
] | Fashion > Other Fashion Accessories | [
"340139/images/image_1_compressed.jpg"
] | [
"340139/stls/AU_Vanilla_HDKeychain.stl"
] | CC-BY | https://www.printables.com/model/340139 | data_0002.tar |
184349 | Among Us Cookie Cutter Set |
<p>Ok, so "Among Us" isn't exactly a Halloween icon, but I needed a cookie cutter for a baking class I am taking and I happen to like "Among Us" quite a bit.</p>
<p>You may want to print this cutter out twice, once regular and once mirrored, so you have crewmen looking both directions.</p>
<p>I was asked if I could ... | [
"kitchen",
"cookie",
"cutter",
"cookies",
"thingiverse",
"kitchentool",
"cookiescutter"
] | Hobby & Makers > Other Ideas | [
"184349/images/image_1_compressed.jpg",
"184349/images/image_10_compressed.jpg",
"184349/images/image_2_compressed.jpg",
"184349/images/image_3_compressed.jpg",
"184349/images/image_4_compressed.jpg",
"184349/images/image_5_compressed.jpg",
"184349/images/image_6_compressed.jpg",
"184349/images/image_... | [
"184349/stls/Among_Us.stl",
"184349/stls/Among_Us_Dead.stl"
] | CC-BY | https://www.printables.com/model/184349 | data_0002.tar |
570712 | Among Us Detachable | [] | Toys & Games > Action Figures & Statues | [
"570712/images/image_1_compressed.jpg"
] | [
"570712/stls/AmongUs - Cabeza.stl",
"570712/stls/AmongUs - centrador.stl",
"570712/stls/AmongUs - Hueso.stl",
"570712/stls/AmongUs - Piernas.stl",
"570712/stls/AmongUs - Tripas.stl",
"570712/stls/AmongUs - Visera.stl"
] | CC-BY | https://www.printables.com/model/570712 | data_0002.tar | |
371463 | Among Us Figures | <p>More will be added and some changes may be made.<br>If there are any changes or additions you would like to see, please leave a comment.</p><p>Only the “Amogus Witch” model should need supports.</p> | [
"models",
"figures",
"amongus",
"hats",
"amogus"
] | Toys & Games > Action Figures & Statues | [
"371463/images/image_1_compressed.jpg"
] | [
"371463/stls/Amogus Party Hat.stl",
"371463/stls/Amogus Santa.stl",
"371463/stls/Amogus Witch.stl",
"371463/stls/Amogus.stl"
] | CC0 | https://www.printables.com/model/371463 | data_0002.tar |
303582 | Among us keycap V2 | [
"keycap",
"cherrymx",
"keycaps",
"amongus",
"cherrykeycaps"
] | Gadgets > Computers | [
"303582/images/image_1_compressed.jpg",
"303582/images/image_2_compressed.jpg",
"303582/images/image_3_compressed.jpg",
"303582/images/image_4_compressed.jpg"
] | [
"303582/stls/Among us Keycap 2.0 V3.stl"
] | CC-BY | https://www.printables.com/model/303582 | data_0002.tar | |
577005 | Among us rock, Rockmongus | <p>A Rock-among us variant that combines the two in an unholy fusion hehe</p><p> </p><p>Please post your makes :)</p> | [
"rock",
"therock",
"amongus",
"among",
"rocktopus",
"amongusgame",
"dwane",
"dwanetherock",
"rocktopussy",
"amongusimpostor",
"rockamongus",
"rockmongus"
] | Tabletop Miniatures > Characters & Monsters | [
"577005/images/image_1_compressed.jpg",
"577005/images/image_2_compressed.jpg"
] | [
"577005/stls/Among us rock.stl"
] | CC-BY | https://www.printables.com/model/577005 | data_0002.tar |
217997 | Amongus Fridge Magnet | <p>Very quick and easy print for an Among Us fridge magnet.</p> | [] | Household > Kitchen | [
"217997/images/image_1_compressed.jpg"
] | [
"217997/stls/amongus.stl"
] | CC0 | https://www.printables.com/model/217997 | data_0002.tar |
416657 | AMS Bambulab, adapter give weight and include desiccant for rolls. | <p>Adapter to give an extra weight to the roll and partially solve the problem of the low weight of the rolls in the AMS.</p><p>Sometimes, when the rolls weigh little when they are running out, in the process of loading and unloading the filament, the rolls are lifted by hitting the AMS protection cover.</p><p>At the s... | [
"bambulab",
"bambulabx1carbon",
"ams"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"416657/images/image_1_compressed.jpg",
"416657/images/image_2_compressed.jpg"
] | [
"416657/stls/adaptador-peso-bobina v3.stl"
] | CC-BY | https://www.printables.com/model/416657 | data_0002.tar |
614887 | AMS desicant box | <p>I tried others. and it popped open when I tried to take it out of the AMS.</p><p>The box is open on the large size for easy loading. This makes it not stand up when loading desiccant. I hold the box when loading.</p><p>Prints without support.</p><p>The cover should be printed stand up to keep the strength of t... | [
"desicant",
"ams"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"614887/images/image_1_compressed.jpg",
"614887/images/image_2_compressed.jpg",
"614887/images/image_3_compressed.jpg",
"614887/images/image_4_compressed.jpg"
] | [
"614887/stls/ams desicant box.stl",
"614887/stls/ams desicant cover.stl",
"614887/stls/AMS desicant.stl"
] | CC-BY | https://www.printables.com/model/614887 | data_0002.tar |
368173 | AMS desiccant tray cover with tab | <p>Added a small tab to the rear of the tray cover so it's easier to grab when it's installed into the AMS.</p><p> </p><p>Edit 1/19/23: Included file for matching bottom from source remix to pair with lid to avoid confusion. (https://www.printables.com/model/341899-modified-bambu-lab-silica-gel-desiccant-tra... | [] | 3D Printers > Bambu Lab Parts & Upgrades | [
"368173/images/image_1_compressed.jpg",
"368173/images/image_2_compressed.jpg",
"368173/images/image_3_compressed.jpg"
] | [
"368173/stls/Tray Bottom.stl",
"368173/stls/Tray Cover With Tab.stl"
] | CC-BY | https://www.printables.com/model/368173 | data_0002.tar |
422783 | AMS Disconnect Tool Gridfinity Holder (Bambu Lab) | <p>I had a place for all my other tools but my AMS disconnect tool was just floating around. It almost fit in the glue stick holder so I just squared it off in Fusion 360 to better hold the AMS disconnect tool and printed it off. Now it has a home!</p><p> </p><p>The AMS disconnect tool can be found here:</p><p><a ... | [
"gridfinity",
"bambulab",
"bambulabx1carbonams",
"bambulabx1carbon",
"bambulabx1ams",
"bambuams"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"422783/images/image_1_compressed.jpg",
"422783/images/image_2_compressed.jpg"
] | [
"422783/stls/AMS Tool Gridfinity Holder.stl"
] | CC-BY | https://www.printables.com/model/422783 | data_0002.tar |
417022 | AMS Holder P1P | <p>Accessoire pour installer facilement le module AMS au dessus de la P1P.</p><p>Impression en 0.28 (environ 3H en PETG avec la P1P).</p><p>Supports requis.</p><p> </p><p>Accessory for easy installation of AMS for BambuLab P1P</p><p>Printed in 0.28 (approximately 3H with PETG on P1P).</p><p>Supports required.</p> | [
"bambulab",
"ams",
"p1p"
] | 3D Printers > Accessories | [
"417022/images/image_1_compressed.jpg",
"417022/images/image_2_compressed.jpg",
"417022/images/image_3_compressed.jpg",
"417022/images/image_4_compressed.jpg",
"417022/images/image_5_compressed.jpg",
"417022/images/image_6_compressed.jpg",
"417022/images/image_7_compressed.jpg",
"417022/images/image_8... | [
"417022/stls/AMS Holder P1P.stl"
] | CC0 | https://www.printables.com/model/417022 | data_0002.tar |
668915 | AMS Lite Wall Mount Adapter | <p>I recommend using #12 drywall anchors if you're not mounting on a stud. You can use the same screws that the stock stand mounts with to attach the AMS. Mount the adapter to the wall first and then attach the AMS! I printed in PLA and it's fine so far, but given the potential weight on the system, I'd recommend print... | [
"mount",
"accessory",
"adapter",
"mods",
"bambulab",
"ams",
"a1mini",
"amslite",
"a1ams"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"668915/images/image_1_compressed.jpg",
"668915/images/image_2_compressed.jpg",
"668915/images/image_3_compressed.jpg",
"668915/images/image_4_compressed.jpg",
"668915/images/image_5_compressed.jpg",
"668915/images/image_6_compressed.jpg"
] | [
"668915/stls/AMS Wall L.stl",
"668915/stls/AMS Wall R.stl"
] | CC-BY | https://www.printables.com/model/668915 | data_0002.tar |
309163 | AMS Roller Riser | <p>For use with larger diameter spools in the Bambu Lab AMS. Prevents the back of the spool from running into the AMS back.</p><p>v1.2 is taller and therefore less likely to fall over while still accommodating larger spools.</p> | [
"spool",
"amazon",
"large",
"fit",
"adapter",
"lab",
"riser",
"basics",
"bambu",
"bambulab",
"ams"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"309163/images/image_1_compressed.jpg",
"309163/images/image_2_compressed.jpg",
"309163/images/image_3_compressed.jpg",
"309163/images/image_4_compressed.jpg"
] | [
"309163/stls/AMS Roller Riser v1.2.stl",
"309163/stls/AMS Roller Riser.stl"
] | CC-BY | https://www.printables.com/model/309163 | data_0002.tar |
427954 | AMS Spulengewicht (Spoolweight) für SUNLU Spulen | <p>Dieses Gewicht wird mit leeren AA- Batterien gefüllt.</p><p> </p><p>Gedruckt auf einem Bambulab X1C mit AMS.</p><p>Layerhöhe adaptiv von 0.16-0.24</p><p>2 Wandlinien, 10% Gyroid infill, Arachne</p><p>Für Spulen mit 72mm Innendurchmesser.</p><p>Verhindert das gegen den Deckel ziehen und verklemmen der Spule im A... | [
"spool",
"carbon",
"weight",
"x1",
"spule",
"sunlu",
"bambu",
"gewicht",
"bambulab",
"bambulabx1ams",
"ams",
"x1c",
"p1p",
"beschwerer"
] | 3D Printers > Bambu Lab Parts & Upgrades | [
"427954/images/image_1_compressed.jpg",
"427954/images/image_2_compressed.jpg",
"427954/images/image_3_compressed.jpg",
"427954/images/image_4_compressed.jpg",
"427954/images/image_5_compressed.jpg",
"427954/images/image_6_compressed.jpg",
"427954/images/image_7_compressed.jpg"
] | [
"427954/stls/Grundkörper_Spulengewicht_leer_v3.stl",
"427954/stls/Grundkörper_Spulengewicht_v3.stl",
"427954/stls/Kappe_Spulengewicht_v3.stl"
] | CC0 | https://www.printables.com/model/427954 | data_0002.tar |
425341 | AMS Stacking Stand (Remix) | Remix of Miahi＇s design with Honeycomb pattern. | Download free 3D printable STL models | [
"remix"
] | 3D Printers > Bambu Lab Parts & Upgrades | [] | [
"425341/stls/Left Honeycomb V2.stl",
"425341/stls/Right Honeycomb v2.stl"
] | CC-BY | https://www.printables.com/model/425341 | data_0002.tar |
123750 | Amun Ra Class STEALTH Frigate from the Expanse | <p>This is a 3D printed version of the Amun Ra Class STEALTH Frigate from the show the Expanse. The model is not the most accurate but is still not bad. Assembly does not require a single drop of glue as it fits all together like a kit. The set comes with few accessories as well.</p>
<p>Watch this video for the model s... | [
"ship",
"space",
"star",
"stealth",
"anubis",
"expanse",
"thingiverse",
"frigate",
"amun"
] | Toys & Games > Vehicles | [
"123750/images/image_1_compressed.jpg",
"123750/images/image_2_compressed.jpg",
"123750/images/image_3_compressed.jpg",
"123750/images/image_4_compressed.jpg",
"123750/images/image_5_compressed.jpg",
"123750/images/image_6_compressed.jpg",
"123750/images/image_7_compressed.jpg"
] | [
"123750/stls/xxx_-_am4_14x.stl",
"123750/stls/xxx_-_am5_4x.stl",
"123750/stls/xxx_-_am6_4x.stl",
"123750/stls/xxx_-_am7.stl",
"123750/stls/xxx_-_am7c.stl",
"123750/stls/xxx_-_am8c_2x.stl",
"123750/stls/xxx_-_am8_2x.stl",
"123750/stls/xxx_-_am9.stl",
"123750/stls/xxx_-_amun1.stl",
"123750/stls/xxx_... | CC-BY | https://www.printables.com/model/123750 | data_0002.tar |
114306 | AMUSANT ! VORON TEST CUBE (keychain) | <blockquote><p>10/01/2022</p><p>added 2 more cubes for more challange …</p><ul><li>Voron_test_cube_30x30mm</li><li>Voron_test_cube_25x25mm </li></ul><p> </p><p><i><strong>3 Section of 40x40mm Rotatory cube 40x40mm keychain </strong></i></p></blockquote><h4>Tolerance inside of 0.3mm (40x... | [
"test",
"cube",
"pla",
"petg",
"voron"
] | 3D Printers > Test Models | [
"114306/images/image_1_compressed.jpg",
"114306/images/image_2_compressed.jpg",
"114306/images/image_3_compressed.jpg",
"114306/images/image_4_compressed.jpg"
] | [
"114306/stls/Voron_test_cube_25x25mm.stl",
"114306/stls/Voron_test_cube_30x30mm.stl",
"114306/stls/Voron_test_cube_4040mm.stl"
] | CC0 | https://www.printables.com/model/114306 | data_0002.tar |
377831 | an earring called "jullie" | <p>I designed the earrings my wife wore to our wedding! Must be printed with a SLA printer!!</p> | [
"earrings",
"jewelry",
"wedding"
] | Fashion > Women | [
"377831/images/image_1_compressed.jpg",
"377831/images/image_2_compressed.jpg"
] | [
"377831/stls/jullie earrings.stl"
] | CC-BY | https://www.printables.com/model/377831 | data_0002.tar |
1269998 | An experiment into a constrained compliant hinge | <p>This is a compliance test. </p><p>You can comply by printing the compliance test. </p><p>designed for 0.2mm layer height, whatever material you feel like.</p><p>Feedback appreciated :)</p> | [] | 3D Printers > Test Models | [
"1269998/images/image_1_compressed.jpg"
] | [
"1269998/stls/Parametric Compliant Hinged Box V7 v1.stl"
] | CC-BY | https://www.printables.com/model/1269998 | data_0002.tar |
150168 | An infinitely adjustable picture frame | <p>This picture frame is designed to fit any rectangular sized picture and requires no supports. </p><p>In PrusaSlicer:<br>Scale the X and Y dimensions for the back plate to the dimensions of your picture (e.g., 150mm x 100mm)<br>Then scale the length of the side pieces to the dimensions of the back plate - 4.4 mm... | [
"frame",
"picture",
"adjustable"
] | Household > Home Decor | [
"150168/images/image_1_compressed.jpg",
"150168/images/image_2_compressed.jpg",
"150168/images/image_3_compressed.jpg",
"150168/images/image_4_compressed.jpg",
"150168/images/image_5_compressed.jpg"
] | [
"150168/stls/Backplate.stl",
"150168/stls/Corner.stl",
"150168/stls/Hanging hook.stl",
"150168/stls/Side piece.stl"
] | CC-BY | https://www.printables.com/model/150168 | data_0002.tar |
24819 | Anaconda 2 Part (Elite Dangerous) | <p>Anaconda model from Elite: Dangerous</p>
<p>Model is split into two parts at the widest point to permit better printing</p>
<p>This work is strictly fanart and not meant for commercial distribution. All respected trade marks are property of Frontier Developments</p>
<ul>
<li><p>Per request I added the non-split vers... | [
"spaceship",
"elitedangerous",
"thingiverse",
"elite",
"anaconda"
] | Toys & Games > Vehicles | [
"24819/images/image_1_compressed.jpg",
"24819/images/image_2_compressed.jpg",
"24819/images/image_3_compressed.jpg",
"24819/images/image_4_compressed.jpg",
"24819/images/image_5_compressed.jpg",
"24819/images/image_6_compressed.jpg",
"24819/images/image_7_compressed.jpg",
"24819/images/image_8_compres... | [
"24819/stls/anaconda_back_v2.stl",
"24819/stls/anaconda_front_v2.stl",
"24819/stls/anaconda_v2.stl"
] | CC-BY | https://www.printables.com/model/24819 | data_0002.tar |
99231 | Anakin Skywalker Lightsaber Crystal Reveal - Star Wars | <p>Here is a fun but larger project to build an opening lightsaber. Most of the many parts I used to make this version were modified from other designers, mostly <a href="https://www.thingiverse.com/thing:1538383">CaseStudyno8</a>. Also from <a href="https://www.thingiverse.com/thing:3394892">Dogbert's emitter remix</a... | [
"light",
"cosplay",
"replica",
"star",
"wars",
"jedi",
"remix",
"saber",
"kyber",
"skywalkers",
"anakins"
] | Costumes & Accessories > Props | [
"99231/images/image_1_compressed.jpg",
"99231/images/image_10_compressed.jpg",
"99231/images/image_11_compressed.jpg",
"99231/images/image_12_compressed.jpg",
"99231/images/image_13_compressed.jpg",
"99231/images/image_14_compressed.jpg",
"99231/images/image_15_compressed.jpg",
"99231/images/image_2_c... | [
"99231/stls/Anakin_Ep_V-VII_Internal_Reveal_Display_Stand_Base.stl",
"99231/stls/Anakin_Ep_V-VII_Internal_Reveal_Display_Stand_Base_Split.stl",
"99231/stls/Anakin_Ep_V-VII_Internal_Reveal_Display_Stand_Legs.stl",
"99231/stls/Anakin_Ep_V-VII_Internal_Reveal_Display_Stand_Tag.stl",
"99231/stls/clamp lever rew... | CC-BY | https://www.printables.com/model/99231 | data_0002.tar |
705837 | Anakin/Luke/Rey's Lightsaber - All Versions - Replica Prop | <p>The iconic lightsaber used throughout the Star Wars film series. Photos show the prop after filling, sanding, and painting. The files contain versions from A New Hope, Empire Strikes Back, and Rise of Skywalker. <a href="https://youtu.be/An3GZPRD6do?si=CGBKZeDc8odpE0ah">We made a video covering the painting, finishi... | [
"starwars",
"replica",
"prop",
"lightsaber",
"anakin",
"lukeskywalker",
"anakinskywalker",
"lukeskywalkerprop"
] | Costumes & Accessories > Props | [
"705837/images/image_1_compressed.jpg",
"705837/images/image_2_compressed.jpg",
"705837/images/image_3_compressed.jpg",
"705837/images/image_4_compressed.jpg"
] | [
"705837/stls/ANHActivator_no_hole.stl",
"705837/stls/ANHActivator_with_hole.stl",
"705837/stls/ANHBladeHolder.stl",
"705837/stls/ANHBladeTip.stl",
"705837/stls/ANHButtCap.stl",
"705837/stls/ANHDRingHolder.stl",
"705837/stls/ANHElectronicsCaddy.stl",
"705837/stls/ANHHandleFin.stl",
"705837/stls/ANHHu... | CC-BY | https://www.printables.com/model/705837 | data_0002.tar |
117789 | Analogue Pocket Display Stand | A stand for the Analogue Pocket | Download free 3D printable STL models | [] | Gadgets > Video Games | [
"117789/images/image_1_compressed.jpg"
] | [
"117789/stls/Analogue Pocket stand v10.stl"
] | CC-BY | https://www.printables.com/model/117789 | data_0002.tar |
5612 | Anatomic Heart (multi material) | <p>This is an anatomically correct human heart. It is created as a multi material version: The heart's Ateries, Atrium, Valve, Ventricle, Papillary and Veins are a seperate file, so you can print a fancy multicolor heart ;) The Ventricle has some holes which makes it possible to see the Valves and Papillaries inside th... | [
"multimaterial",
"mmu",
"valve",
"medical",
"heart",
"anatomical",
"medicine",
"ventricle",
"papillary",
"veins",
"atrium",
"ateries",
"anatomy"
] | Art & Design > Sculptures | [
"5612/images/image_1_compressed.jpg",
"5612/images/image_2_compressed.jpg",
"5612/images/image_3_compressed.jpg",
"5612/images/image_4_compressed.jpg",
"5612/images/image_5_compressed.jpg",
"5612/images/image_6_compressed.jpg",
"5612/images/image_7_compressed.jpg"
] | [
"5612/stls/arteries.stl",
"5612/stls/atrium.stl",
"5612/stls/heart.stl",
"5612/stls/papillary.stl",
"5612/stls/valve.stl",
"5612/stls/veins.stl",
"5612/stls/ventricle.stl"
] | CC-BY | https://www.printables.com/model/5612 | data_0002.tar |
1003401 | Anatomical Heart (Solid Body) | <p>The .3mf file has custom orientation & painted supports for the better quality printing.</p> | [
"human",
"heart",
"anatomical",
"solid",
"heartshape",
"heartshaped",
"anatomicallycorrect",
"filled",
"cardiac",
"solidbody"
] | Costumes & Accessories > Props | [
"1003401/images/image_1_compressed.jpg",
"1003401/images/image_2_compressed.jpg",
"1003401/images/image_3_compressed.jpg",
"1003401/images/image_4_compressed.jpg",
"1003401/images/image_5_compressed.jpg"
] | [
"1003401/stls/Anatomical Heart (Solid Body).stl"
] | CC0 | https://www.printables.com/model/1003401 | data_0002.tar |
1113197 | Anbernic RG40XX H Case | <p>A magnetized case for the wonderful Anbernic RG40XX H handheld.</p><p>Use 8 6x2 mm magnets and glue the foam from the package to the lid. Use another foam with a 6 mm width if you don't have the original anymore.</p> | [
"case",
"magnetic",
"anbernic"
] | Hobby & Makers > Electronics | [
"1113197/images/image_1_compressed.jpg",
"1113197/images/image_2_compressed.jpg",
"1113197/images/image_3_compressed.jpg"
] | [
"1113197/stls/Anbernic RG400XXH Case Lid without text.stl",
"1113197/stls/Anbernic RG400XXH Case Lid.stl",
"1113197/stls/Anbernic RG400XXH Case.stl"
] | CC-BY | https://www.printables.com/model/1113197 | data_0002.tar |
17632 | Anchor - nautical key float / buoy | <p>What about making something light and buoyant that is actually a nautical symbol of something that is heavy and certainly not meant to float ☺</p>
<p>I designed an anchor to be used as a float / buoy for your boat keys. When going out on a sunny day, taking the boat for a spin, you don’t want your fun to get spoiled... | [
"boat",
"float",
"keyring",
"nautical",
"thingiverse",
"anker",
"boating",
"anchor",
"boei",
"buoy",
"buoyancy",
"drijver"
] | Household > Outdoor & Garden | [
"17632/images/image_1_compressed.jpg",
"17632/images/image_2_compressed.jpg",
"17632/images/image_3_compressed.jpg",
"17632/images/image_4_compressed.jpg",
"17632/images/image_5_compressed.jpg"
] | [
"17632/stls/anker_breed.stl"
] | CC-BY | https://www.printables.com/model/17632 | data_0002.tar |
324206 | Anchor earring hearth | Anchor_earring | Download free 3D printable STL models | [
"earring",
"ship",
"funny",
"ocean",
"sea",
"anchor",
"ears",
"women",
"grey"
] | Fashion > Women | [
"324206/images/image_1_compressed.jpg"
] | [
"324206/stls/anchor_earring_fixed.stl"
] | CC0 | https://www.printables.com/model/324206 | data_0002.tar |
148968 | Anchor Wall Hook | <p>Printed a cute bathroom anchor hook for a friend. This will be used for a small hand towel.</p><p> </p><p>I printed in PLA with a high infill</p> | [
"hook",
"home",
"wallhook",
"wallhooks"
] | Household > Bathroom | [
"148968/images/image_1_compressed.jpg",
"148968/images/image_2_compressed.jpg",
"148968/images/image_3_compressed.jpg"
] | [
"148968/stls/anchor wall hool.stl"
] | CC-BY | https://www.printables.com/model/148968 | data_0002.tar |
229417 | Ancient Cruiser from Stargate | <p>This is my model of the Ancient Cruiser from the Stargate Atlantis. The ship appeared only briefly in the episode Progeny. It is a kit, no glue required. The assembly is very easy but iI recommend to look at the assembly video just to be sure. <br><br>Link to the video: </p><figure class="media"><oembed ur... | [
"ancients",
"stargate",
"cruiser",
"atlantis",
"lantean"
] | Toys & Games > Vehicles | [
"229417/images/image_1_compressed.jpg",
"229417/images/image_2_compressed.jpg",
"229417/images/image_3_compressed.jpg",
"229417/images/image_4_compressed.jpg"
] | [
"229417/stls/xxx_-_cruiser.stl",
"229417/stls/xxx_-_cruiser2.stl",
"229417/stls/xxx_-_cruiser3.stl",
"229417/stls/xxx_-_cruiser3a.stl",
"229417/stls/xxx_-_cruiser4.stl",
"229417/stls/xxx_-_cruiser4a.stl",
"229417/stls/xxx_-_cruiser4b.stl",
"229417/stls/xxx_-_cruiser_a.stl",
"229417/stls/xxx_-_cruise... | CC-BY | https://www.printables.com/model/229417 | data_0002.tar |
1540886 | Ancient Greek Goddess Statue | A lovely greek madame. | Download free 3D printable STL models | [
"statue",
"figurine",
"fantasy",
"figure",
"dnd",
"miniature",
"woman",
"scifi",
"female",
"goddess",
"greek",
"ancientgreece",
"sci",
"fi",
"scultpture"
] | Toys & Games > Action Figures & Statues | [
"1540886/images/image_1_compressed.jpg"
] | [
"1540886/stls/Greek Godess Statue.stl"
] | CC-BY | https://www.printables.com/model/1540886 | data_0002.tar |
80898 | Ancient Greek style bowl | <p>The horse symbol and patterns are from the Internet.</p><p>I modeled it in Fusion 360 and sliced it in Super Slicer.</p><p>I printed it with Matte Black, Matte Kraft, and Silk Copper, all PLA.</p><p>My matte black is so thick, I have to change the wipe tower purge volume multiplier from 60 to 200, which considerably... | [] | World & Scans > Historical Context | [
"80898/images/image_1_compressed.jpg",
"80898/images/image_2_compressed.jpg"
] | [
"80898/stls/Bowl1.stl",
"80898/stls/Bowl2.stl",
"80898/stls/Bowl3.stl",
"80898/stls/Greek Bowl.stl"
] | CC0 | https://www.printables.com/model/80898 | data_0002.tar |
789977 | Android Mini | My version of the Google mascot inspired by Android Mini Collectibles | Download free 3D printable STL models | [
"google",
"android"
] | Toys & Games > Other Toys & Games | [
"789977/images/image_1_compressed.jpg",
"789977/images/image_2_compressed.jpg"
] | [
"789977/stls/Android-Mini-Arm.stl",
"789977/stls/Android-Mini-Body.stl",
"789977/stls/Android-Mini-Head.stl"
] | CC-BY | https://www.printables.com/model/789977 | data_0002.tar |
44046 | Anet A6 Y belt tensioner | <p>This is a remix of <a href="/CH35C0">CH35C0</a>'s <a href="https://www.thingiverse.com/thing:2149867">Y belt tensioner for the A8</a>. The geometry seemed a bit off for my setup and I also wanted to upgrade the idler. This version:</p>
<ul>
<li>has a lower center for the idler, more similar to the original Anet desi... | [
"thingiverse",
"aneta6upgrade"
] | 3D Printers > Other Printer Parts & Upgrades | [
"44046/images/image_1_compressed.jpg",
"44046/images/image_2_compressed.jpg",
"44046/images/image_3_compressed.jpg",
"44046/images/image_4_compressed.jpg",
"44046/images/image_5_compressed.jpg",
"44046/images/image_6_compressed.jpg",
"44046/images/image_7_compressed.jpg",
"44046/images/image_8_compres... | [
"44046/stls/a6_y_axis_tensioner.stl",
"44046/stls/a6_y_axis_tensioner_5mm.stl",
"44046/stls/plate.stl",
"44046/stls/screw2.stl"
] | CC-BY | https://www.printables.com/model/44046 | data_0002.tar |
470631 | Angel | <p>scanned image of wife's Angel statue testing both Einstar scanner and Prusa SL1S printer..</p> | [] | Art & Design > Sculptures | [
"470631/images/image_1_compressed.jpg"
] | [
"470631/stls/New Angel 001.stl"
] | CC0 | https://www.printables.com/model/470631 | data_0002.tar |
183950 | Angel (easy Print) | <p>Minimalistic angel.</p><p>Decoration for Christmas and other religious celebrations.</p><p>Beautiful and easy to print</p><p>without supports</p><p>raft recommended</p><p>Printing without infill is possible for small prints. Shoulders may overhang too much with large prints.</p><p>Due to the simple and fast printing... | [
"christmas",
"test",
"decor",
"art",
"angel",
"figure",
"xmas",
"heaven",
"thingiverse",
"christmastree",
"minimalism",
"holy"
] | Household > Home Decor | [
"183950/images/image_1_compressed.jpg",
"183950/images/image_2_compressed.jpg",
"183950/images/image_3_compressed.jpg"
] | [
"183950/stls/Angel.stl"
] | CC-BY | https://www.printables.com/model/183950 | data_0002.tar |
628815 | Angel cookie cutter | <p>Just a simple angel cookie cutter. Enjoy</p> | [
"christmas",
"cookie",
"angel",
"winter",
"cookiecutter"
] | 3D Printers > Accessories | [
"628815/images/image_1_compressed.jpg",
"628815/images/image_2_compressed.jpg"
] | [
"628815/stls/angel cookie cutter.stl"
] | CC-BY | https://www.printables.com/model/628815 | data_0002.tar |
129032 | Angel Lamp | <p>I created this angel lamp shell from a model in thingiverse <a href="https://www.thingiverse.com/thing:2578636">https://www.thingiverse.com/thing:2578636</a></p><p>if you liked it please leave a tip :)</p> | [
"lamp",
"led",
"angel",
"ledlamp"
] | Art & Design > Sculptures | [
"129032/images/image_1_compressed.jpg"
] | [
"129032/stls/Angel_HQ.stl",
"129032/stls/Angel_rounded.stl",
"129032/stls/Angel_rounded2.stl"
] | CC0 | https://www.printables.com/model/129032 | data_0002.tar |
18300 | Angel Ornamental Statue | <figure class="media"><oembed url="https://www.youtube.com/watch?v=M0oxDTCrQMc"></oembed></figure><p>Version one is designed for single filament printers.<br>Version two (MMU) is designed for multi material printers.<br>Version three (Lattice/Voronoi) is designed for single filament printers</p><p> </p><p>Help sup... | [
"prusa",
"halloween",
"decoration",
"statue",
"christmas",
"voronoi",
"angel",
"dnd",
"dungeons",
"todd",
"dungeonsanddragons",
"xmas",
"halloweendecoration",
"lattice",
"makerbot",
"decorations",
"thingiverse",
"latticemodel",
"christmasdecorations",
"christmastree",
"treeto... | Household > Home Decor | [
"18300/images/image_1_compressed.jpg",
"18300/images/image_10_compressed.jpg",
"18300/images/image_11_compressed.jpg",
"18300/images/image_12_compressed.jpg",
"18300/images/image_13_compressed.jpg",
"18300/images/image_14_compressed.jpg",
"18300/images/image_15_compressed.jpg",
"18300/images/image_16_... | [
"18300/stls/angel_ornamental_statue_-version_1.stl",
"18300/stls/angel_ornamental_statue_-version_1_18300.stl",
"18300/stls/angel_ornamental_statue_-version_2_-mmu_-1_robe_g.stl",
"18300/stls/angel_ornamental_statue_-version_2_-mmu_-2_wings_.stl",
"18300/stls/angel_ornamental_statue_-version_2_-mmu_-3_hair_... | CC-BY | https://www.printables.com/model/18300 | data_0002.tar |
13040 | Angel Sitting with Wreath | <p>3d capture of angel on tombstone.</p><p> Fixed in MakePrintable. (9/24/19)</p><h3>Print instructions</h3><p>Category: Scans & Replicas</p> | [
"sitting",
"angel",
"christian",
"catholic",
"thingiverse",
"wreath",
"headstone",
"tombstone"
] | Art & Design > Sculptures | [
"13040/images/image_1_compressed.jpg",
"13040/images/image_2_compressed.jpg"
] | [
"13040/stls/angelsitting_stl.stl"
] | CC-BY | https://www.printables.com/model/13040 | data_0002.tar |
807711 | Angel statuette | Beautiful guardian angel for your home decoration. | Download free 3D printable STL models | [
"decoration",
"statue",
"christmas",
"decor",
"angel",
"sculpt",
"sculpture",
"easter",
"guardian",
"statuette"
] | Household > Home Decor | [
"807711/images/image_1_compressed.jpg",
"807711/images/image_2_compressed.jpg",
"807711/images/image_3_compressed.jpg"
] | [
"807711/stls/andel.stl"
] | CC-BY | https://www.printables.com/model/807711 | data_0002.tar |
636049 | Angel Wings decoration | <p>The original public-domain image was traced, and outline created in Inkscape, then imported into FreeCAD, where the connecting pieces were added.</p><p>Beware the connecting tolerances when scaling - if the factor is high, you might need to scale the SVG, reimport, and recreate the model, or the pieces won't fit tog... | [
"angel",
"wings",
"goodomens"
] | Art & Design > 2D Plates & Logos | [
"636049/images/image_1_compressed.jpg",
"636049/images/image_2_compressed.jpg"
] | [
"636049/stls/left.stl",
"636049/stls/right.stl"
] | CC-BY | https://www.printables.com/model/636049 | data_0002.tar |
669670 | Angel / Anděl | <p>Jednoduchý model anděla tištěný bez spodních a vrchních vrstev zato s různými druhy výplně, použijte minimálně 3 perimentry, 0.2 mm vrstvu, PLA.</p><p>Rozměry 47.92 x 40.35 x 4 mm.</p><p>Pro zavěšení využijte svatozář a háček nebo provázek.</p> | [
"decoration",
"christmas",
"angel",
"christmasdecoration",
"ozdoba",
"vanoce",
"dekorace",
"andel",
"vanocnidekorace",
"vanocniozdoba"
] | Household > Home Decor | [
"669670/images/image_1_compressed.jpg",
"669670/images/image_2_compressed.jpg",
"669670/images/image_3_compressed.jpg",
"669670/images/image_4_compressed.jpg",
"669670/images/image_5_compressed.jpg",
"669670/images/image_6_compressed.jpg",
"669670/images/image_7_compressed.jpg",
"669670/images/image_8... | [
"669670/stls/angel.stl"
] | CC-BY | https://www.printables.com/model/669670 | data_0002.tar |
885254 | Angle and Circle Geometric Drawing Template | <p>A multi-functional geometric drawing template for helping draw circles and angles, and can also be using as a ruler for metric measurement. The center circle rotates, and has different spots for drawing straight lines at a desired angle (the provided tick marks are at 5 degree increments). Or place the ... | [
"printinplace",
"angle",
"drawing",
"template",
"circletemplate",
"drawingtool",
"templates"
] | Household > Office | [
"885254/images/image_1_compressed.jpg",
"885254/images/image_2_compressed.jpg",
"885254/images/image_3_compressed.jpg",
"885254/images/image_4_compressed.jpg",
"885254/images/image_5_compressed.jpg"
] | [
"885254/stls/Angle and Circle Drawing Template.stl"
] | CC-BY | https://www.printables.com/model/885254 | data_0002.tar |
1012731 | angle bracket 25x25x30 | Angel bracket | Download free 3D printable STL models | [] | Household > Other House Equipment | [
"1012731/images/image_1_compressed.jpg"
] | [
"1012731/stls/25х25х30.stl"
] | CC0 | https://www.printables.com/model/1012731 | data_0002.tar |
87608 | Angle cutting jig / Kosořez | <p>Simple jig for cutting accurate angles, mainly for airplane builds.</p><h3><strong>Print instructions</strong></h3><p>Print with PLA. Standard 0.4mm nozzle, 3 perimeters, 20% infill. Layer height 0.2mm recommended. </p><p> </p><h3>Like this model?</h3><p>Check out my other creations here: <a href="https://... | [
"model",
"cuttingguide",
"rcmodel",
"cuttingjig",
"balsa",
"balza"
] | Hobby & Makers > Tools | [
"87608/images/image_1_compressed.jpg"
] | [
"87608/stls/angle cutting jig (small).stl",
"87608/stls/angle cutting jig.stl"
] | CC0 | https://www.printables.com/model/87608 | data_0002.tar |
774444 | Angle Finder | <h5><strong>Assembly</strong></h5><p><br>Insert nuts into hexagonal holes<br>Take the pointing arm, and place a washer in the recess closest to the pointing end<br>attach the pointing arm to the protractor by inserting a 3M x 8mm screw into the hole you just inserted the washer in and tighten.<br>Take another washer an... | [
"tool",
"triangle",
"measure",
"angle",
"measurementtool",
"anglefinder",
"measuretwice"
] | Hobby & Makers > Tools | [
"774444/images/image_1_compressed.jpg",
"774444/images/image_2_compressed.jpg",
"774444/images/image_3_compressed.jpg",
"774444/images/image_4_compressed.jpg",
"774444/images/image_5_compressed.jpg",
"774444/images/image_6_compressed.jpg"
] | [
"774444/stls/angle finder arms V3.stl",
"774444/stls/angle finder spacer.stl",
"774444/stls/angle finder V2 protractor.stl"
] | CC-BY | https://www.printables.com/model/774444 | data_0002.tar |
262022 | Angle Grinder Discs Holder | <p>Holder for angle grinder discs. The discs are stored in two rows, the maximum disc size is 125mm. The holder is ideally attached with 4mm screws.</p><p>Printing without supports, Infill: 10%.</p><p><strong>Share your printed model.</strong></p> | [
"grinder",
"holder",
"angle",
"disc"
] | Hobby & Makers > Organizers | [
"262022/images/image_1_compressed.jpg",
"262022/images/image_2_compressed.jpg",
"262022/images/image_3_compressed.jpg"
] | [
"262022/stls/Disk holder.stl"
] | CC-BY | https://www.printables.com/model/262022 | data_0002.tar |
674953 | angle grinder dust remover 125 | [
"bosch",
"dewalt",
"makita"
] | Hobby & Makers > Tools | [
"674953/images/image_1_compressed.jpg",
"674953/images/image_2_compressed.jpg",
"674953/images/image_3_compressed.jpg",
"674953/images/image_4_compressed.jpg",
"674953/images/image_5_compressed.jpg",
"674953/images/image_6_compressed.jpg",
"674953/images/image_7_compressed.jpg"
] | [
"674953/stls/angle_grinder_dust_remover_125.stl",
"674953/stls/angle_grinder_dust_remover_230.stl"
] | CC-BY | https://www.printables.com/model/674953 | data_0002.tar | |
535078 | Angle grinder holder | <p>This is holder/bracket to hang up an angle grinder, designed for a Bosch cordless version. Will probably fit other models as well.</p><p>Printed with backside flat on the build plate, used support for the overhang.</p><p>Prusa MK3S+ ; 0,6mm nozzle</p> | [
"grinder",
"holder",
"bracket",
"toolsholder"
] | Hobby & Makers > Organizers | [
"535078/images/image_1_compressed.jpg",
"535078/images/image_2_compressed.jpg",
"535078/images/image_3_compressed.jpg"
] | [
"535078/stls/slijptol houder.stl"
] | CC0 | https://www.printables.com/model/535078 | data_0002.tar |
329069 | Angle Measuring Tool | <p>Here is a single print that measures inside and outside angles to within +/- 1 degree.</p><p>It is one print with no support needed.</p><p>The pointer hole provided me a medium press fit on the pin. This allowed the pointer to turn,, stay in place, and not fall off.</p><p>If you find the pointer hole too tight... | [
"tool",
"angle",
"handtools",
"woodworkingtools"
] | Hobby & Makers > Tools | [
"329069/images/image_1_compressed.jpg",
"329069/images/image_2_compressed.jpg",
"329069/images/image_3_compressed.jpg"
] | [
"329069/stls/T.1-BASE (1).stl",
"329069/stls/T2.2Pointer (1) (1).stl",
"329069/stls/T2.AlternativePoinnter.stl",
"329069/stls/T2.AngleMeasure v26.stl"
] | CC0 | https://www.printables.com/model/329069 | data_0002.tar |
119808 | Angle Pyramid Whetstone Knife Blade Sharpener Sharpening Stone Angle Guide (15, 25, 30, 40 degrees) | <p>I recommend scaling up to 1" on the sides (166%).</p> | [
"tool",
"blade",
"plane",
"hand",
"knife",
"sharpening",
"whetstone",
"angle",
"guide",
"pyramid",
"sharpener",
"chisel"
] | Hobby & Makers > Tools | [
"119808/images/image_1_compressed.jpg",
"119808/images/image_2_compressed.jpg"
] | [
"119808/stls/Angle Guide.stl"
] | CC-BY | https://www.printables.com/model/119808 | data_0002.tar |
899133 | Angle template | <p><strong>The angle template makes it easy to transfer any shape!</strong></p><p>The ledges can be added to as required. </p><p>Variable adjustable into each other, the measuring unit is in cm.<br>5 ledges can be screwed together for storage.</p><p><strong>Print settings:</strong><br>Infill: 75% .<br>Support: No<... | [
"tool",
"angle",
"tools",
"gauge",
"werkzeug",
"template",
"winkel",
"contour",
"schablone",
"konturenlehre"
] | Hobby & Makers > Tools | [
"899133/images/image_1_compressed.jpg",
"899133/images/image_2_compressed.jpg",
"899133/images/image_3_compressed.jpg",
"899133/images/image_4_compressed.jpg",
"899133/images/image_5_compressed.jpg"
] | [
"899133/stls/angle template screw V2.stl",
"899133/stls/angle template V2.stl",
"899133/stls/angle template without labeling V2.stl"
] | CC-BY | https://www.printables.com/model/899133 | data_0002.tar |
142349 | Angled Cat Food Bowl Holder |
<p>I've read that having an elevated and angled food bowl for cats is supposed to help prevent them from throwing up. So I quickly designed this. You'll need to print 2x sides and 1x brace. There are magnet holes in the sides designed for a 5x2mm magnet.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong>... | [
"cat",
"thingiverse",
"catfood",
"petbowl",
"petfood",
"catfeeder",
"dfoles",
"catfeederbowl"
] | Household > Pets | [
"142349/images/image_1_compressed.jpg",
"142349/images/image_2_compressed.jpg"
] | [
"142349/stls/Brace.stl",
"142349/stls/Side.stl"
] | CC-BY | https://www.printables.com/model/142349 | data_0002.tar |
40947 | Angled double PC4-M10 adapter for MK3S frame for reverse bowden setup | <p>This angled adapter allows for a very clean connection of a reverse bowden filament feeder to your MK3S printer (such as from a dry box). The adapter allows mounting two PC4-M10 fittings (M10x0.9 thread), to connect the extruder end to the front one, and the drybox to the rear.</p>
<p>The adapter attaches with two s... | [
"box",
"frame",
"drybox",
"mount",
"mk3s",
"angle",
"ptfe",
"dry",
"tube",
"bowden",
"reverse",
"pc4m10"
] | 3D Printers > Accessories | [
"40947/images/image_1_compressed.jpg",
"40947/images/image_2_compressed.jpg",
"40947/images/image_3_compressed.jpg"
] | [
"40947/stls/angle_adaptor.stl"
] | CC-BY | https://www.printables.com/model/40947 | data_0002.tar |
180039 | Angled Dragon Ball Stand | <p>A nice stand for displaying your Dragon Balls. This one's at an angle to make the rear balls easier to see. This design is based on 42mm balls.</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Creality</p><p><strong>Printer: </strong></p><p>Ender 3</p><p><strong>Rafts:</strong></p><p>No</p><p>... | [
"thingiverse"
] | Costumes & Accessories > Props | [
"180039/images/image_1_compressed.jpg",
"180039/images/image_2_compressed.jpg",
"180039/images/image_3_compressed.jpg"
] | [
"180039/stls/DBstand.stl"
] | CC-BY | https://www.printables.com/model/180039 | data_0002.tar |
189676 | Angled fore grip mlok AFG M-LOK without side mounts | <p>Hello there,</p><p>Full credit to user Rusty__Shackleford for this great model "Angled fore grip mlok AFG M-LOK"</p><p>I just remixed it by cutting side mount which didn't really worked for me, also took me too much time thinking about good angle for it to print... one of sidemounts failed anyway, so here it is.</p>... | [
"remix",
"airsoft",
"thingiverse",
"angled",
"foregrip",
"asg",
"mlok",
"afg",
"angledforegrip"
] | Sports & Outdoor > Other Sports | [
"189676/images/image_1_compressed.jpg",
"189676/images/image_2_compressed.jpg",
"189676/images/image_3_compressed.jpg",
"189676/images/image_4_compressed.jpg",
"189676/images/image_5_compressed.jpg",
"189676/images/image_6_compressed.jpg",
"189676/images/image_7_compressed.jpg",
"189676/images/image_8... | [
"189676/stls/M-LOK_AFG_v3.stl"
] | CC-BY | https://www.printables.com/model/189676 | data_0002.tar |
430968 | Angled foregrip picatinny | <p>Just a test of my modelling abilities. Works well. I basically wanted something that would print very nicely.</p>
<p>Requires 2x M5x30 bolts and M5 nuts.</p>
<h3>Print Settings</h3>
<p><strong>Printer Brand:</strong></p>
<p>Creality</p>
<p class="detail-setting printer"><strong>Printer: </strong>
<div><p>Ender-3 v2<... | [
"picatinny",
"thingiverse",
"afg",
"angledforegrip"
] | Sports & Outdoor > Outdoor Sports | [
"430968/images/image_1_compressed.jpg",
"430968/images/image_2_compressed.jpg",
"430968/images/image_3_compressed.jpg",
"430968/images/image_4_compressed.jpg",
"430968/images/image_5_compressed.jpg"
] | [
"430968/stls/AFG_AngledForeGrip.stl"
] | CC-BY | https://www.printables.com/model/430968 | data_0002.tar |
58873 | Angled heatbed cable cover (REMIX) | <p>This is a remix of T1miverse's design<br><a href="https://www.thingiverse.com/thing:2964580">https://www.thingiverse.com/thing:2964580</a></p><p><strong>NOTE: Outdated version!! Find the latest version here:</strong></p><p><a href="https://www.printables.com/model/100314-v2-of-angled-heatbed-cable-cover-remix">https... | [
"prusa",
"mk3",
"cable",
"enclosure",
"mk3s",
"lack",
"cover",
"heatbed",
"angled",
"60"
] | 3D Printers > Other Printer Parts & Upgrades | [
"58873/images/image_1_compressed.jpg",
"58873/images/image_2_compressed.jpg",
"58873/images/image_3_compressed.jpg"
] | [
"58873/stls/hb-cable-bottom.stl",
"58873/stls/hb-cable-top+1.stl"
] | CC-BY | https://www.printables.com/model/58873 | data_0002.tar |
643904 | Angled mounts for Daylight on a Matchstick Voron V0.2 | <p>You should use M3 heat inserts with an height of 3mm</p><p>heat inserty like these ones: <a href="https://amzn.to/3R8CUqp">Heat inserts M3x3 OD: 4,6mm</a></p> | [
"voron",
"daylight",
"matchstick",
"voron01",
"voron02",
"daylightstick"
] | 3D Printers > Voron Parts & Upgrades | [
"643904/images/image_1_compressed.jpg"
] | [
"643904/stls/Angled mounts for Daylight Sticks.stl"
] | CC0 | https://www.printables.com/model/643904 | data_0002.tar |
52752 | Angled Raspberry Pi Camera Bed Mount (Prusa MK3) | <p>I was using the straight one from Andreas Gohr. however when i put a door on my enclosure the camera arm bumped into it. So I made a bent one that appears not to clash with anything. It does get close to the Z frame so when the bed is all the way back you lose some view. </p>
<p>Please check out the link to Andreas ... | [] | 3D Printers > Prusa Parts & Upgrades | [
"52752/images/image_1_compressed.jpg",
"52752/images/image_2_compressed.jpg",
"52752/images/image_3_compressed.jpg"
] | [
"52752/stls/cam-arm-1.stl"
] | CC0 | https://www.printables.com/model/52752 | data_0002.tar |
181455 | Angled Vertical Foregrip (M-Lok) | <h3>Angled Vertical Foregrip (M-Lok)</h3>
<p>I was looking for foregrips on thingiverse but couldn't really find one that I liked so I decided to make one myself. I found this grip made by Strike Industries and I really liked the look of it so I decided to make this one.</p>
<p>This is made in Fusion 360, I'm not reall... | [
"grip",
"weapon",
"fusion360",
"gun",
"attachment",
"airsoft",
"thingiverse",
"airsoftparts",
"foregrip",
"airsoftaccesories",
"airsoftattachment",
"m4airsoft",
"mlok",
"angledforegrip",
"verticalforegrip"
] | Sports & Outdoor > Other Sports | [
"181455/images/image_1_compressed.jpg",
"181455/images/image_10_compressed.jpg",
"181455/images/image_11_compressed.jpg",
"181455/images/image_12_compressed.jpg",
"181455/images/image_13_compressed.jpg",
"181455/images/image_14_compressed.jpg",
"181455/images/image_2_compressed.jpg",
"181455/images/im... | [
"181455/stls/Angled_Vertical_Foregrip.stl",
"181455/stls/Angled_Vertical_Foregrip_WPlates.stl",
"181455/stls/Grip_Plates.stl",
"181455/stls/Longer_no_support_under_edges.stl"
] | CC-BY | https://www.printables.com/model/181455 | data_0002.tar |
342826 | Animal Bookmarks | <p>Quick, easy, fun, animal bookmarks.</p><p>The thickness is 0.6 mm for the flat part and an additional 0.6 mm for the animal face outline. I used a 0.4 mm nozzle and 0.2 mm for the layer height.</p><p>Shown are various colors of Prusament PLA with Prusament Galaxy Black for the animal face outlines. These... | [
"sheep",
"dog",
"cat",
"animal",
"rabbit",
"pig",
"book",
"cow",
"bookmark",
"animals",
"horse",
"donkey",
"bookmarks"
] | Household > Office | [
"342826/images/image_1_compressed.jpg",
"342826/images/image_2_compressed.jpg"
] | [
"342826/stls/AnimalBookmarks.stl",
"342826/stls/CatBookmark.stl",
"342826/stls/CowBookmark.stl",
"342826/stls/DogBookmark.stl",
"342826/stls/DonkeyBookmark.stl",
"342826/stls/HorseBookmark.stl",
"342826/stls/PigBookmark.stl",
"342826/stls/RabbitBookmark.stl",
"342826/stls/SheepBookmark.stl"
] | CC-BY | https://www.printables.com/model/342826 | data_0002.tar |
399944 | Animal Cell | <p>I made this for my son's school project. I made the parts individually so that we could use different color filaments. We glued the parts to the cell in the shape and order we wanted after printing everything. I don't have a multi color printer so this seemed to be the best option.</p>
Category: 3D Printing | [
"animal",
"science",
"cells"
] | Learning > Chemistry & Biology | [
"399944/images/image_1_compressed.jpg",
"399944/images/image_10_compressed.jpg",
"399944/images/image_2_compressed.jpg",
"399944/images/image_3_compressed.jpg",
"399944/images/image_4_compressed.jpg",
"399944/images/image_5_compressed.jpg",
"399944/images/image_6_compressed.jpg",
"399944/images/image_... | [
"399944/stls/Base_2.stl",
"399944/stls/Centrosomes.stl",
"399944/stls/Golgi_Body.stl",
"399944/stls/Lysosomes.stl",
"399944/stls/Mitochondria.stl",
"399944/stls/More_Golgi_Body.stl",
"399944/stls/Nuc back.stl",
"399944/stls/Nuc Center (2).stl",
"399944/stls/Nuc Center 2.stl",
"399944/stls/Rough_En... | CC-BY | https://www.printables.com/model/399944 | data_0002.tar |
100038 | Animal Crossing Fossil Box | <h3>Animal Crossing Fossil Box</h3><h3>A Fossil for Blathers to Identify</h3><p>I recommend printing the fossil Star, Plus, and Swirl in white, and printing the fossil top and bottom lid in blue. Multi material support not needed, the models are split out and designed to snap/glue into place. Supports are required only... | [
"box",
"thingiverse",
"fossil",
"animalcrossing"
] | Gadgets > Video Games | [
"100038/images/image_1_compressed.jpg",
"100038/images/image_10_compressed.jpg",
"100038/images/image_11_compressed.jpg",
"100038/images/image_2_compressed.jpg",
"100038/images/image_3_compressed.jpg",
"100038/images/image_4_compressed.jpg",
"100038/images/image_5_compressed.jpg",
"100038/images/image... | [
"100038/stls/fossil-small-v8-final-plus.stl",
"100038/stls/fossil-small-v8-final-rock_bot.stl",
"100038/stls/fossil-small-v8-final-rock_top.stl",
"100038/stls/fossil-small-v8-final-star.stl",
"100038/stls/fossil-small-v8-final-swirl.stl"
] | CC-BY | https://www.printables.com/model/100038 | data_0002.tar |
342778 | Animal Crossing Inspired Gift Box | <p>This is a simple gift box for gift cards or small items. </p><h3>Caveats</h3><p>Only the box base can be scaled, and even then, only in the Z dimension. This is because the tolerances between the ribbons, lid, and box would become skewed.</p><p>I'm more than happy to upload different dimensions upon request.</p... | [
"box",
"animal",
"gift",
"fusion360",
"bow",
"ribbon",
"madewithfusion360",
"giftbox",
"nosupports",
"animalcrossing",
"crossing",
"sireinsectus"
] | Toys & Games > Other Toys & Games | [
"342778/images/image_1_compressed.jpg",
"342778/images/image_2_compressed.jpg"
] | [
"342778/stls/Body.stl",
"342778/stls/Bow.stl",
"342778/stls/Gift-Box with Bow (Demo Assembly).stl",
"342778/stls/Lid.stl",
"342778/stls/Ribbon Back.stl",
"342778/stls/Ribbon Front.stl",
"342778/stls/Ribbon Left.stl",
"342778/stls/Ribbon Right.stl",
"342778/stls/Ribbon Top.stl",
"342778/stls/Ribbon... | CC-BY | https://www.printables.com/model/342778 | data_0002.tar |
336115 | Animal Crossings Leaf cookie cutter | <p>Print with the flattest side down.</p> | [
"cookie",
"cookiecutter",
"cookiecutters",
"animalcrossing",
"acnh",
"foodstuff"
] | Household > Kitchen | [
"336115/images/image_1_compressed.jpg"
] | [
"336115/stls/Animal Crossing cookie leaf.stl"
] | CC-BY | https://www.printables.com/model/336115 | data_0002.tar |
897486 | Animal paw keychain | bigger hole for keychain, and text | [
"cat",
"animal",
"keychain",
"paw"
] | Toys & Games > Other Toys & Games | [
"897486/images/image_1_compressed.jpg",
"897486/images/image_2_compressed.jpg",
"897486/images/image_3_compressed.jpg"
] | [
"897486/stls/Animal+paw.stl"
] | CC-BY | https://www.printables.com/model/897486 | data_0002.tar |
926922 | Animal Tags | <figure class="media"><oembed url="https://youtu.be/dzBPHl5JeFw"></oembed></figure><p> </p><p>This is a collection of animal print backpack tags. The idea behind the set is you can hold them up to the track while you're traveling and compare to those you find.</p><p>I suggest printing with a 0.25 size nozzle as th... | [
"animals",
"paw"
] | World & Scans > Animals | [
"926922/images/image_1_compressed.jpg"
] | [
"926922/stls/beaver.stl",
"926922/stls/black-bear.stl",
"926922/stls/blank.stl",
"926922/stls/bobcat.stl",
"926922/stls/cottentail-rabbit.stl",
"926922/stls/coyote.stl",
"926922/stls/crow.stl",
"926922/stls/dog.stl",
"926922/stls/fisher.stl",
"926922/stls/gray-fox.stl",
"926922/stls/gray-squirre... | CC0 | https://www.printables.com/model/926922 | data_0002.tar |
259046 | Animals Cookie Cutters | <p>0.2mm resolution works well</p> | [
"cookiecutters"
] | Household > Kitchen | [
"259046/images/image_1_compressed.jpg"
] | [
"259046/stls/animals-Elephant.stl",
"259046/stls/animals-Giraffe.stl",
"259046/stls/animals-Hippo.stl",
"259046/stls/animals-Lion.stl",
"259046/stls/animals-Monkey.stl",
"259046/stls/animals-Tiger.stl",
"259046/stls/animals-Zebra.stl"
] | CC0 | https://www.printables.com/model/259046 | data_0002.tar |
14738 | Animals for Tabletop Gaming! | <p>All sorts of animals for your tabletop game!</p>
<p>This is actually a collection of models I've found here that I modified and made perfect for tabletop gaming purposes.</p>
<p>Print them all with supports and a raft.</p>
<p>Want to access even more models not found here in Prusa Printers? Interested in supporting ... | [
"bird",
"bat",
"animal",
"mount",
"eagle",
"wolf",
"bear",
"animals",
"horse",
"hog",
"shark",
"thingiverse",
"mammal",
"beast",
"swarm"
] | Toys & Games > Board Games | [
"14738/images/image_1_compressed.jpg",
"14738/images/image_10_compressed.jpg",
"14738/images/image_100_compressed.jpg",
"14738/images/image_101_compressed.jpg",
"14738/images/image_102_compressed.jpg",
"14738/images/image_103_compressed.jpg",
"14738/images/image_104_compressed.jpg",
"14738/images/imag... | [
"14738/stls/ape.stl",
"14738/stls/armored-brown-bear.stl",
"14738/stls/awakend_shrub.stl",
"14738/stls/awakened_tree_body.stl",
"14738/stls/awakened_tree_for_shapeways.stl",
"14738/stls/axe_beak.stl",
"14738/stls/baboon.stl",
"14738/stls/baboon_miguel_is_drunk.stl",
"14738/stls/badger.stl",
"14738... | CC-BY | https://www.printables.com/model/14738 | data_0002.tar |
24748 | Animated Armor Updated | <p>Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: <a href="https://www.patreon.com/mz4250">https://www.patreon.com/mz4250</a></p>
<p>Patrons have access to all my files in one place, a request board, as well ... | [
"armor",
"dnd",
"animated"
] | Toys & Games > Board Games | [
"24748/images/image_1_compressed.jpg",
"24748/images/image_2_compressed.jpg"
] | [
"24748/stls/animated-armor-updated-position-of-attention.stl",
"24748/stls/animated-armor-updated.stl"
] | CC-BY | https://www.printables.com/model/24748 | data_0002.tar |
360775 | ANKER Vertical Mouse Battery Cover | <p>Just a replacement battery cover for the vertical style mouse by ANKER.</p><p>STL should be already orientated correctly, but please print with the wording face down for best results.</p> | [
"mouse",
"battery",
"anker"
] | Household > Office | [
"360775/images/image_1_compressed.jpg",
"360775/images/image_2_compressed.jpg",
"360775/images/image_3_compressed.jpg",
"360775/images/image_4_compressed.jpg",
"360775/images/image_5_compressed.jpg",
"360775/images/image_6_compressed.jpg"
] | [
"360775/stls/ANKER_Mouse_Battery_Cover.stl"
] | CC-BY | https://www.printables.com/model/360775 | data_0002.tar |
664917 | AnkerMake M5 Filament Guide | <p>UPDATE VERSION 5 - Single Arm 10 DEC 2023 - Much Stronger</p><p>Another option for a filament guide for the Anker Make M5 Printer.</p><p>Holds Steady due to wedge in between post and Filament holder.</p><p>Needs supports, but they are easy and quick to remove.</p><p>I Sliced it as the picture below with 30% infill a... | [
"filament",
"filamentguide",
"m5",
"ankermakem5",
"ankermake",
"m5printer"
] | 3D Printers > Other Printer Parts & Upgrades | [
"664917/images/image_1_compressed.jpg",
"664917/images/image_2_compressed.jpg",
"664917/images/image_3_compressed.jpg",
"664917/images/image_4_compressed.jpg",
"664917/images/image_5_compressed.jpg"
] | [
"664917/stls/M5 FILAMENT GUIDE V5.stl"
] | CC-BY | https://www.printables.com/model/664917 | data_0002.tar |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.