Daily Papers

Local loss-landscape stabilization under sample growth is typically measured either pointwise or through isotropic averaging in the full parameter space. Despite practical value, both choices probe directions that contribute little to the dominant local deformation of strongly anisotropic neural landscapes. We recast stabilization as an observational problem and introduce a unified family of criteria parameterized by an aggregation order and a probing distribution; within this family we propose a curvature-aligned criterion Δ_2^{(D)} that probes the loss increment field in the top-D eigenspace of the empirical Hessian near a trained solution. Solely from a local quadratic model, we prove that Δ_2^{(D)} preserves the O(k^{-2}) mean-squared rate of the full-space criterion while replacing ambient-dimension curvature dependence with dependence on the subspace dimension D; a corollary gives a closed-form spectral expression and a proposition identifies the top-D eigenspace as extremal within the eigenspace-aligned family. We also derive scalable estimators based on Hessian-vector products, subspace Monte Carlo, and a closed-form Gaussian-moment proxy. On a decoder-only transformer, a curvature-aligned probe occupying a tiny fraction of parameter space already reproduces the full-space mean-squared signal to within numerical noise throughout the validated local regime, and the closed-form estimator is orders of magnitude faster than direct Monte Carlo after subspace construction.

This is the second paper devoted to the numerical version of Signature-inverse Theorem in terms of the underlying joint invariants. Signature Theorem and its Inverse guarantee any application of differential invariant signature curves to the invariant recognition of visual objects. We first show the invalidity of Curvature-inverse and Signature inverse theorems, meaning non-congruent meshes may have the same joint invariant numerical curvature or signature. Then by classifying three and five point ordinary meshes respectively in the Euclidean and affine cases, we look for conditions in terms of the associated joint invariant signatures which make these theorems correct. Additionally, we bring forward The Host Theorem to provide a simpler version of Signature-inverse Theorem for closed ordinary meshes.

We construct a geometric framework for cosmological large-scale structure based on optimal transport theory and Wasserstein geometry. In this framework, Ricci curvature on the probability measure space P_2(M) is characterized by the geodesic convexity of entropy and is formulated as the response of probability distributions to optimal transport. We introduce effective Ricci curvatures K_{eff}^{(infty)} and K_{eff}^{(N)} associated with Kullback--Leibler-type and Rényi-type entropies, corresponding respectively to the curvature-dimension conditions CD(K,infty) and CD(K,N). By localizing these curvatures to finite scales using local and reference measures, we construct curvature indicators applicable to observational data. Under a local quadratic approximation, the effective curvature reduces to the Hessian of the log-density, showing that conventional Hessian-based structure classifications arise as a limiting case of the present framework. We further show that effective curvature depends on observational scale and formulate this dependence as a scale flow, distinct from Ricci flow because it describes a change of resolution rather than a time evolution of geometry. Treating curvature as a random field then extends the statistical description of density fields: curvature statistics are given by higher-order weighted integrals of the power spectrum and by spatial derivatives of the correlation function, emphasizing geometric rather than amplitude information. This framework provides a unified connection between optimal transport geometry and cosmological structure analysis, and offers a new perspective on multiscale structure and nonlinear statistics.

Adapting CLIP to vertical domains is typically approached by novel fine-tuning strategies or by continual pre-training (CPT) on large domain-specific datasets. Yet, data itself remains an underexplored factor in this process. We revisit this task from a data-centric perspective: Can effective data selection substitute for large-scale datasets in CPT? We introduce CHIPS (Curvature-aware Hybrid Influence in Projection Subspace), which assigns each image-text pair a utility score that integrates three complementary factors aligned with three goals: faithfulness via a curvature-aware, Newton-style alignment computed in CLIP's end-point subspace; scalability via an InfoNCE-aware curvature estimator with Johnson-Lindenstrauss (JL) sketching; and retention via a selection-aware relevance weight combined with learnability to balance target adaptation against general-domain preservation. We justify this design theoretically by proving a lower-bound guarantee on the proxy's correlation with full-parameter alignment and by characterizing the bias-variance trade-offs introduced by curvature mixing and JL sketching. We evaluate CHIPS empirically across various settings: 1) CHIPS attains state-of-the-art performance among selection baselines on 17 medical benchmarks, matches full-dataset CPT with 30% of the data, and outperforms half-dataset CPT using only 10%; 2) on 31 general-domain benchmarks, CHIPS yields the smallest performance drop under 10-30% data-retention budgets. Code, data, and checkpoints will be released.

We study optimization problems on Hadamard manifolds, motivated by recent advances in geometric approaches to optimization on curved spaces, particularly those involving the structure of Busemann functions. We introduce a projection based variant of the proximal point algorithm, termed the Busemann hybrid projection proximal point algorithm, which replaces Euclidean hyperplanes with horospheres defined via convex Busemann functions. The algorithm performs projections in closed form using the gradients of these functions, resulting in a geometrically intrinsic scheme that requires no tangent space linear solves. We allow for inexact subgradient evaluations and prove global convergence under controlled inexactness, with a relative error level strictly below one. We establish a Fejér type descent and sublinear complexity with a rate proportional to the inverse square root of the iteration count, and show that the exact variant coincides with the classical Riemannian proximal point algorithm. The framework clarifies the role of Busemann based subdifferentials in optimization on spaces of nonpositive curvature.

Videos inherently represent 2D projections of a dynamic 3D world. However, our analysis suggests that video diffusion models trained solely on raw video data often fail to capture meaningful geometric-aware structure in their learned representations. To bridge this gap between video diffusion models and the underlying 3D nature of the physical world, we propose Geometry Forcing, a simple yet effective method that encourages video diffusion models to internalize latent 3D representations. Our key insight is to guide the model's intermediate representations toward geometry-aware structure by aligning them with features from a pretrained geometric foundation model. To this end, we introduce two complementary alignment objectives: Angular Alignment, which enforces directional consistency via cosine similarity, and Scale Alignment, which preserves scale-related information by regressing unnormalized geometric features from normalized diffusion representation. We evaluate Geometry Forcing on both camera view-conditioned and action-conditioned video generation tasks. Experimental results demonstrate that our method substantially improves visual quality and 3D consistency over the baseline methods. Project page: https://GeometryForcing.github.io.

We use tools from geometric statistics to analyze the usual estimation procedure of a template shape. This applies to shapes from landmarks, curves, surfaces, images etc. We demonstrate the asymptotic bias of the template shape estimation using the stratified geometry of the shape space. We give a Taylor expansion of the bias with respect to a parameter sigma describing the measurement error on the data. We propose two bootstrap procedures that quantify the bias and correct it, if needed. They are applicable for any type of shape data. We give a rule of thumb to provide intuition on whether the bias has to be corrected. This exhibits the parameters that control the bias' magnitude. We illustrate our results on simulated and real shape data.

A significant gap exists between theory and practice in deep learning. Generalization and approximation error bounds are often derived for simplified models or are too loose to be informative. Many rely on the manifold hypothesis and on geometric regularity such as intrinsic dimension, curvature, and reach. Progress requires insight into data-manifold geometry and suitable benchmarks, yet existing options are polarized: analytic manifolds with known geometry but limited applicability, or real-world datasets where geometry is only coarsely estimable. We introduce a benchmarking framework for studying data geometry. We repurpose and extend dSprites and COIL-20 with additional transformation dimensions and dense, axis-aligned sampling, and pair them with finite-difference estimators that recover curvature, reach, and volume at near-ground-truth accuracy in a regime where general-purpose estimators are unreliable or difficult to deploy. The framework is intended as a controlled testbed, useful as a calibration environment for geometric estimators and a sandbox for probing theoretical assumptions. To illustrate its use, we present two application studies, namely assessing the scaling behavior of the bounds of Genovese et al. and Fefferman et al., and tracking the layer-wise geometry of a β-VAE, highlighting the behavior of current bounds and the value of controlled benchmarks for guiding and validating future theory. A reference implementation is available at https://github.com/koulakis/manifold-microscope.

We introduce a new intrinsic measure of local curvature on point-cloud data called diffusion curvature. Our measure uses the framework of diffusion maps, including the data diffusion operator, to structure point cloud data and define local curvature based on the laziness of a random walk starting at a point or region of the data. We show that this laziness directly relates to volume comparison results from Riemannian geometry. We then extend this scalar curvature notion to an entire quadratic form using neural network estimations based on the diffusion map of point-cloud data. We show applications of both estimations on toy data, single-cell data, and on estimating local Hessian matrices of neural network loss landscapes.

Does text have an intrinsic curvature? Language is increasingly modeled in curved geometries - hyperbolic spaces for hierarchy, mixed-curvature manifolds for compositional structure - yet a basic scientific question remains unresolved: what does curvature mean for text itself, in a way that is native to language rather than an artifact of the embedding space we choose? We argue that text does indeed have curvature, and show how to detect it, define it, and use it. To this end, we propose Texture, a text-native, word-level discrete curvature signal, and make three contributions. (a) Existence: We provide empirical and theoretical certificates that semantic inference in natural corpora is non-flat, i.e. language has inherent curvature. (b) Definition: We define Texture by reconciling left- and right-context beliefs around a masked word through a Schrodinger bridge, yielding a curvature field that is positive where context focuses meaning and negative where it fans out into competing continuations. (c) Utility: Texture is actionable: it serves as a general-purpose measurement and control primitive enabling geometry without geometric training; we instantiate it on two representative tasks, improving long-context inference through curvature-guided compression and retrieval-augmented generation through curvature-guided routing. Together, our results establish a text-native curvature paradigm, making curvature measurable and practically useful.

Recent work by Baratin et al. (2021) sheds light on an intriguing pattern that occurs during the training of deep neural networks: some layers align much more with data compared to other layers (where the alignment is defined as the euclidean product of the tangent features matrix and the data labels matrix). The curve of the alignment as a function of layer index (generally) exhibits an ascent-descent pattern where the maximum is reached for some hidden layer. In this work, we provide the first explanation for this phenomenon. We introduce the Equilibrium Hypothesis which connects this alignment pattern to signal propagation in deep neural networks. Our experiments demonstrate an excellent match with the theoretical predictions.

We present a novel adaptive optimization algorithm for large-scale machine learning problems. Equipped with a low-cost estimate of local curvature and Lipschitz smoothness, our method dynamically adapts the search direction and step-size. The search direction contains gradient information preconditioned by a well-scaled diagonal preconditioning matrix that captures the local curvature information. Our methodology does not require the tedious task of learning rate tuning, as the learning rate is updated automatically without adding an extra hyperparameter. We provide convergence guarantees on a comprehensive collection of optimization problems, including convex, strongly convex, and nonconvex problems, in both deterministic and stochastic regimes. We also conduct an extensive empirical evaluation on standard machine learning problems, justifying our algorithm's versatility and demonstrating its strong performance compared to other start-of-the-art first-order and second-order methods.

The training of score-based diffusion models (SDMs) is based on score matching. The challenge of score matching is that it includes a computationally expensive Jacobian trace. While several methods have been proposed to avoid this computation, each has drawbacks, such as instability during training and approximating the learning as learning a denoising vector field rather than a true score. We propose a novel score matching variant, local curvature smoothing with Stein's identity (LCSS). The LCSS bypasses the Jacobian trace by applying Stein's identity, enabling regularization effectiveness and efficient computation. We show that LCSS surpasses existing methods in sample generation performance and matches the performance of denoising score matching, widely adopted by most SDMs, in evaluations such as FID, Inception score, and bits per dimension. Furthermore, we show that LCSS enables realistic image generation even at a high resolution of 1024 times 1024.

Many theoretical results in deep learning can be traced to symmetry or equivariance of neural networks under parameter transformations. However, existing analyses are typically problem-specific and focus on first-order consequences such as conservation laws, while the implications for second-order structure remain less understood. We develop a general equivariance toolbox that yields coupled first- and second-order constraints on learning dynamics. The framework extends classical Noether-type analyses in three directions: from gradient constraints to Hessian constraints, from symmetry to general equivariance, and from continuous to discrete transformations. At the first order, our framework unifies conservation laws and implicit-bias relations as special cases of a single identity. At the second order, it provides structural predictions about curvature: which directions are flat or sharp, how the gradient aligns with Hessian eigenspaces, and how the loss landscape geometry reflects the underlying transformation structure. We illustrate the framework through several applications, recovering known results while also deriving new characterizations that connect transformation structure to modern empirical observations about optimization geometry.

Deep neural networks have been demonstrated to achieve phenomenal success in many domains, and yet their inner mechanisms are not well understood. In this paper, we investigate the curvature of image manifolds, i.e., the manifold deviation from being flat in its principal directions. We find that state-of-the-art trained convolutional neural networks for image classification have a characteristic curvature profile along layers: an initial steep increase, followed by a long phase of a plateau, and followed by another increase. In contrast, this behavior does not appear in untrained networks in which the curvature flattens. We also show that the curvature gap between the last two layers has a strong correlation with the generalization capability of the network. Moreover, we find that the intrinsic dimension of latent codes is not necessarily indicative of curvature. Finally, we observe that common regularization methods such as mixup yield flatter representations when compared to other methods. Our experiments show consistent results over a variety of deep learning architectures and multiple data sets. Our code is publicly available at https://github.com/azencot-group/CRLM

Strictly proper scoring rules identify the true conditional class distribution at population level, but their curvature can alter optimization and finite-sample behavior. We study three multiclass objectives: a class-aware quadratic Bregman score (CAPM), a strongly convex generator with constrained log-cosh ridges (HPG), and an HPG objective with an annealed probability-margin penalty (APMS). CAPM is treated as a structured instance of established quadratic scoring-rule theory. We derive conditional-regret, curvature, range, and logit-gradient bounds for CAPM and HPG, and prove exact penalty-range and conditional-target displacement bounds for APMS. Controlled five-seed experiments use Digits, Wisconsin breast cancer, and synthetic confusion and long-tail problems under clean labels, symmetric and pair-flip corruption, class imbalance, calibration evaluation, input corruption, and first-order adversarial perturbations. The candidates are close to cross-entropy on clean data and show descriptive gains in some noisy-label cells, but the five-seed comparisons are interpreted descriptively rather than as significance evidence. The selected noisy-label baselines perform better on Digits with 40% symmetric label noise, and explicit prior-adjustment methods perform better in the 30:1 synthetic long-tail experiment. Ablations do not show a consistent benefit from the candidate-specific graph, ridge, or margin components. The mathematical analysis establishes the stated properties, and the experiments delimit the empirical evidence; together they do not support a claim of general superiority.

In the Lagrange-Newton method, where Newton's method is applied to a Lagrangian function that includes equality constraints, all stationary points are saddle points. It is therefore not possible to use a line-search method based on the value of the objective function; instead, the line search can operate on merit functions. In this report, we explore an alternative line-search method which is applicable to this case; it particulary addresses the damping of the step length in tight valleys. We propose a line-search criterion based on the divergence of the field of Newton step vectors. The visualization of the criterion for two-dimensional test functions reveals a network of ravines with flat bottom at the zero points of the criterion. The ravines are typically connected to stationary points. To traverse this ravine network in order to approach a stationary point, a zigzag strategy is devised. Numerical experiments demonstrate that the novel line-search strategy succeeds from most starting points in all test functions, but only exhibits the desired damping of the step length in some situations. At the present stage it is therefore difficult to appraise the utility of this contribution.

Curvilinear object segmentation is critical for many applications. However, manually annotating curvilinear objects is very time-consuming and error-prone, yielding insufficiently available annotated datasets for existing supervised methods and domain adaptation methods. This paper proposes a self-supervised curvilinear object segmentation method that learns robust and distinctive features from fractals and unlabeled images (FreeCOS). The key contributions include a novel Fractal-FDA synthesis (FFS) module and a geometric information alignment (GIA) approach. FFS generates curvilinear structures based on the parametric Fractal L-system and integrates the generated structures into unlabeled images to obtain synthetic training images via Fourier Domain Adaptation. GIA reduces the intensity differences between the synthetic and unlabeled images by comparing the intensity order of a given pixel to the values of its nearby neighbors. Such image alignment can explicitly remove the dependency on absolute intensity values and enhance the inherent geometric characteristics which are common in both synthetic and real images. In addition, GIA aligns features of synthetic and real images via the prediction space adaptation loss (PSAL) and the curvilinear mask contrastive loss (CMCL). Extensive experimental results on four public datasets, i.e., XCAD, DRIVE, STARE and CrackTree demonstrate that our method outperforms the state-of-the-art unsupervised methods, self-supervised methods and traditional methods by a large margin. The source code of this work is available at https://github.com/TY-Shi/FreeCOS.

Supervised synthetic CT generation from CBCT requires registered training pairs, yet perfect registration between separately acquired scans remains unattainable. This registration bias propagates into trained models and corrupts standard evaluation metrics. This may suggest that superior benchmark performance indicates better reproduction of registration artifacts rather than anatomical fidelity. We propose physics-based CBCT simulation to provide geometrically aligned training pairs by construction, combined with evaluation using geometric alignment metrics against input CBCT rather than biased ground truth. On two independent pelvic datasets, models trained on synthetic data achieved superior geometric alignment (Normalized Mutual Information: 0.31 vs 0.22) despite lower conventional intensity scores. Intensity metrics showed inverted correlations with clinical assessment for deformably registered data, while Normalized Mutual Information consistently predicted observer preference across registration methodologies (rho = 0.31, p < 0.001). Clinical observers preferred synthetic-trained outputs in 87% of cases, demonstrating that geometric fidelity, not intensity agreement with biased ground truth, aligns with clinical requirements.

Representational analysis explores how input data of a neural system are encoded in high dimensional spaces of its distributed neural activations, and how we can compare different systems, for instance, artificial neural networks and brains, on those grounds. While existing methods offer important insights, they typically do not account for local intrinsic geometrical properties within the high-dimensional representation spaces. To go beyond these limitations, we explore Ollivier-Ricci curvature and Ricci flow as tools to study the alignment of representations between humans and artificial neural systems on a geometric level. As a proof-of-principle study, we compared the representations of face stimuli between VGG-Face, a human-aligned version of VGG-Face, and corresponding human similarity judgments from a large online study. Using this discrete geometric framework, we were able to identify local structural similarities and differences by examining the distributions of node and edge curvature and higher-level properties by detecting and comparing community structure in the representational graphs.

We present a class of novel optimisers for training neural networks that makes use of the Riemannian metric naturally induced when the loss landscape is embedded in higher-dimensional space. This is the same metric that underlies common visualisations of loss landscapes. By taking this geometric perspective literally and using the induced metric, we develop a new optimiser and compare it to existing methods, namely: SGD, Adam, AdamW, and Muon, across a range of tasks and architectures. Empirically, we conclude that this new class of optimisers is highly effective in low dimensional examples, and provides slight improvement over state-of-the-art methods for training neural networks. These new optimisers have theoretically desirable properties. In particular, the effective learning rate is automatically decreased in regions of high curvature acting as a smoothed out form of gradient clipping. Similarly, one variant of these optimisers can also be viewed as inducing an effective scheduled learning rate and decoupled weight decay is the natural choice from our geometric perspective. The basic method can be used to modify any existing preconditioning method. The new optimiser has a computational complexity comparable to that of Adam.

In this paper, we deduce a Bochner-type identity for compact gradient Einstein-type manifolds with boundary. As consequence, we are able to show a rigidity result for Einstein-type manifolds assuming the parallel Ricci curvature condition. Moreover, we provide a condition on the norm of the gradient of the potential function in order to classify such structures.

Optimization analyses for cross-entropy training rely on local Taylor models of the loss to predict whether a proposed step will decrease the objective. These surrogates are reliable only inside the Taylor convergence radius of the true loss along the update direction. That radius is set not by real-line curvature alone but by the nearest complex singularity. For cross-entropy, the softmax partition function F=sum_j exp(z_j) has complex zeros -- ``ghosts of softmax'' -- that induce logarithmic singularities in the loss and cap this radius. To make this geometry usable, we derive closed-form expressions under logit linearization along the proposed update direction. In the binary case, the exact radius is ρ^*=δ^2+ π^2/Δ_a. In the multiclass case, we obtain the lower bound ρ_a=π/Δ_a, where Δ_a=max_k a_k-min_k a_k is the spread of directional logit derivatives a_k=nabla z_kcdot v. This bound costs one Jacobian-vector product and reveals what makes a step fragile: samples that are both near a decision flip and highly sensitive to the proposed direction tighten the radius. The normalized step size r=τ/ρ_a separates safe from dangerous updates. Across six tested architectures and multiple step directions, no model fails for r<1, yet collapse appears once rge 1. Temperature scaling confirms the mechanism: normalizing by ρ_a shrinks the onset-threshold spread from standard deviation 0.992 to 0.164. A controller that enforces τleρ_a survives learning-rate spikes up to 10{,} 000times in our tests, where gradient clipping still collapses. Together, these results identify a geometric constraint on cross-entropy optimization that operates through Taylor convergence rather than Hessian curvature.

This paper studies the fitting of Hessian or its inverse with stochastic Hessian-vector products. A Hessian fitting criterion, which can be used to derive most of the commonly used methods, e.g., BFGS, Gaussian-Newton, AdaGrad, etc., is used for the analysis. Our studies reveal different convergence rates for different Hessian fitting methods, e.g., sublinear rates for gradient descent in the Euclidean space and a commonly used closed-form solution, linear rates for gradient descent on the manifold of symmetric positive definite (SPL) matrices and certain Lie groups. The Hessian fitting problem is further shown to be strongly convex under mild conditions on a specific yet general enough Lie group. To confirm our analysis, these methods are tested under different settings like noisy Hessian-vector products, time varying Hessians, and low precision arithmetic. These findings are useful for stochastic second order optimizations that rely on fast, robust and accurate Hessian estimations.

The Platonic Representation Hypothesis suggests that independently trained neural networks converge to increasingly similar latent spaces. However, current strategies for mapping these representations are inherently pairwise, scaling quadratically with the number of models and failing to yield a consistent global reference. In this paper, we study the alignment of M ge 3 models. We first adapt Generalized Procrustes Analysis (GPA) to construct a shared orthogonal universe that preserves the internal geometry essential for tasks like model stitching. We then show that strict isometric alignment is suboptimal for retrieval, where agreement-maximizing methods like Canonical Correlation Analysis (CCA) typically prevail. To bridge this gap, we finally propose Geometry-Corrected Procrustes Alignment (GCPA), which establishes a robust GPA-based universe followed by a post-hoc correction for directional mismatch. Extensive experiments demonstrate that GCPA consistently improves any-to-any retrieval while retaining a practical shared reference space.

Geometry-aware optimization algorithms, such as Muon, have achieved remarkable success in training deep neural networks (DNNs). These methods leverage the underlying geometry of DNNs by selecting appropriate norms for different layers and updating parameters via norm-constrained linear minimization oracles (LMOs). However, even within a group of layers associated with the same norm, the local curvature can be heterogeneous across layers and vary dynamically over the course of training. For example, recent work shows that sharpness varies substantially across transformer layers and throughout training, yet standard geometry-aware optimizers impose fixed learning rates to layers within the same group, which may be inefficient for DNN training. In this paper, we introduce a noise-adaptive layerwise learning rate scheme on top of geometry-aware optimization algorithms and substantially accelerate DNN training compared to methods that use fixed learning rates within each group. Our method estimates gradient variance in the dual norm induced by the chosen LMO on the fly, and uses it to assign time-varying noise-adaptive layerwise learning rates within each group. We provide a theoretical analysis showing that our algorithm achieves a sharp convergence rate. Empirical results on transformer architectures such as LLaMA and GPT demonstrate that our approach achieves faster convergence than state-of-the-art optimizers.

Direct Preference Optimization (DPO) is a principled, scalable alternative to RLHF for aligning large language models from pairwise preferences, but its internal geometric footprint remains undercharacterized, limiting audits, checkpoint comparisons, and failure prediction. We introduce SPINAL (Scaling-law and Preference Integration in Neural Alignment Layers), a diagnostic that measures how alignment reshapes representations across depth by tracing localized structural change layer by layer. Across model families, DPO produces a layerwise calibration effect concentrated in the final decoder blocks (often layers 21-30), where preference gradients most directly affect the next-token distribution. SPINAL encodes each checkpoint as a depth trace over (layer index, contraction score, transport score). The contraction score summarizes how quickly the tail of a layer's spectrum decays (how fast small modes vanish); higher values indicate stronger contraction into fewer effective directions. The transport score summarizes how much the token distribution shifts between adjacent layers using a bounded overlap measure; lower values indicate shorter, smoother steps through representation space. Aligned checkpoints show a late-layer ramp-up in contraction and a smooth reduction in transport, consistent with tightened and stabilized policy mass, while unaligned models trace higher-curvature, more entropic, and geometrically incoherent depth paths. Overall, alignment is geometrically localized: the final layers encode the dominant preference-induced corrections. SPINAL turns this localization into a practical audit signal, quantifying where alignment concentrates, how strongly it manifests, and when it begins to destabilize during training.

Decision-based black-box attacks often necessitate a large number of queries to craft an adversarial example. Moreover, decision-based attacks based on querying boundary points in the estimated normal vector direction often suffer from inefficiency and convergence issues. In this paper, we propose a novel query-efficient curvature-aware geometric decision-based black-box attack (CGBA) that conducts boundary search along a semicircular path on a restricted 2D plane to ensure finding a boundary point successfully irrespective of the boundary curvature. While the proposed CGBA attack can work effectively for an arbitrary decision boundary, it is particularly efficient in exploiting the low curvature to craft high-quality adversarial examples, which is widely seen and experimentally verified in commonly used classifiers under non-targeted attacks. In contrast, the decision boundaries often exhibit higher curvature under targeted attacks. Thus, we develop a new query-efficient variant, CGBA-H, that is adapted for the targeted attack. In addition, we further design an algorithm to obtain a better initial boundary point at the expense of some extra queries, which considerably enhances the performance of the targeted attack. Extensive experiments are conducted to evaluate the performance of our proposed methods against some well-known classifiers on the ImageNet and CIFAR10 datasets, demonstrating the superiority of CGBA and CGBA-H over state-of-the-art non-targeted and targeted attacks, respectively. The source code is available at https://github.com/Farhamdur/CGBA.

The aerodynamic coefficients of aircrafts are significantly impacted by its geometry, especially when the angle of attack (AoA) is large. In the field of aerodynamics, traditional polynomial-based parameterization uses as few parameters as possible to describe the geometry of an airfoil. However, because the 3D geometry of a wing is more complicated than the 2D airfoil, polynomial-based parameterizations have difficulty in accurately representing the entire shape of a wing in 3D space. Existing deep learning-based methods can extract massive latent neural representations for the shape of 2D airfoils or 2D slices of wings. Recent studies highlight that directly taking geometric features as inputs to the neural networks can improve the accuracy of predicted aerodynamic coefficients. Motivated by geometry theory, we propose to incorporate Riemannian geometric features for learning Coefficient of Pressure (CP) distributions on wing surfaces. Our method calculates geometric features (Riemannian metric, connection, and curvature) and further inputs the geometric features, coordinates and flight conditions into a deep learning model to predict the CP distribution. Experimental results show that our method, compared to state-of-the-art Deep Attention Network (DAN), reduces the predicted mean square error (MSE) of CP by an average of 8.41% for the DLR-F11 aircraft test set.

We give an alternative proof of the Schoen--Simon--Yau curvature estimates and associated Bernstein-type theorems (1975), and extend the original result by including the case of 6-dimensional (stable minimal) immersions. The key step is an ε-regularity theorem, that assumes smallness of the scale-invariant L^2 norm of the second fundamental form. Further, we obtain a graph description, in the Lipschitz multi-valued sense, for any stable minimal immersion of dimension ngeq 2, that may have a singular set Σ of locally finite H^{n-2}-measure, and that is weakly close to a hyperplane. (In fact, if H^{n-2}(Σ)=0, the conclusion is strengthened to a union of smooth graphs.) This follows directly from an ε-regularity theorem, that assumes smallness of the scale-invariant L^2 tilt-excess (verified when the hypersurface is weakly close to a hyperplane). Specialising the multi-valued decomposition to the case of embeddings, we recover the Schoen--Simon theorem (1981). In both ε-regularity theorems the relevant quantity (respectively, length of the second fundamental form and tilt function) solves a non-linear PDE on the immersed minimal hypersurface. The proof is carried out intrinsically (without linearising the PDE) by implementing an iteration method à la De Giorgi (from the linear De Giorgi--Nash--Moser theory). Stability implies estimates (intrinsic weak Caccioppoli inequalities) that make the iteration effective despite the non-linear framework. (In both ε-regularity theorems the method gives explicit constants that quantify the required smallness.)

Recently, flat minima are proven to be effective for improving generalization and sharpness-aware minimization (SAM) achieves state-of-the-art performance. Yet the current definition of flatness discussed in SAM and its follow-ups are limited to the zeroth-order flatness (i.e., the worst-case loss within a perturbation radius). We show that the zeroth-order flatness can be insufficient to discriminate minima with low generalization error from those with high generalization error both when there is a single minimum or multiple minima within the given perturbation radius. Thus we present first-order flatness, a stronger measure of flatness focusing on the maximal gradient norm within a perturbation radius which bounds both the maximal eigenvalue of Hessian at local minima and the regularization function of SAM. We also present a novel training procedure named Gradient norm Aware Minimization (GAM) to seek minima with uniformly small curvature across all directions. Experimental results show that GAM improves the generalization of models trained with current optimizers such as SGD and AdamW on various datasets and networks. Furthermore, we show that GAM can help SAM find flatter minima and achieve better generalization.

Geometric alignment appears in a variety of applications, ranging from domain adaptation, optimal transport, and normalizing flows in machine learning; optical flow and learned augmentation in computer vision and deformable registration within biomedical imaging. A recurring challenge is the alignment of domains whose topology is not the same; a problem that is routinely ignored, potentially introducing bias in downstream analysis. As a first step towards solving such alignment problems, we propose an unsupervised algorithm for the detection of changes in image topology. The model is based on a conditional variational auto-encoder and detects topological changes between two images during the registration step. We account for both topological changes in the image under spatial variation and unexpected transformations. Our approach is validated on two tasks and datasets: detection of topological changes in microscopy images of cells, and unsupervised anomaly detection brain imaging.

Training large-scale neural networks requires solving nonconvex optimization where the choice of optimizer fundamentally determines both convergence behavior and computational efficiency. While adaptive methods like Adam have long dominated practice, the recently proposed Muon optimizer achieves superior performance through orthogonalized momentum updates that enforce isotropic geometry with uniform singular values. However, this strict isotropy discards potentially valuable curvature information encoded in gradient spectra, motivating optimization methods that balance geometric structure with adaptivity. We introduce FISMO (Fisher-Structured Momentum-Orthogonalized) optimizer, which generalizes isotropic updates to incorporate anisotropic curvature information through Fisher information geometry. By reformulating the optimizer update as a trust-region problem constrained by a Kronecker-factored Fisher metric, FISMO achieves structured preconditioning that adapts to local loss landscape geometry while maintaining computational tractability. We establish convergence guarantees for FISMO in stochastic nonconvex settings, proving an O(1/T) rate for the expected squared gradient norm with explicit characterization of variance reduction through mini-batching. Empirical evaluation on image classification and language modeling benchmarks demonstrates that FISMO achieves superior training efficiency and final performance compared to established baselines.

We introduce the Information-Estimation Metric (IEM), a novel form of distance function derived from an underlying continuous probability density over a domain of signals. The IEM is rooted in a fundamental relationship between information theory and estimation theory, which links the log-probability of a signal with the errors of an optimal denoiser, applied to noisy observations of the signal. In particular, the IEM between a pair of signals is obtained by comparing their denoising error vectors over a range of noise amplitudes. Geometrically, this amounts to comparing the score vector fields of the blurred density around the signals over a range of blur levels. We prove that the IEM is a valid global distance metric and derive a closed-form expression for its local second-order approximation, which yields a Riemannian metric. For Gaussian-distributed signals, the IEM coincides with the Mahalanobis distance. But for more complex distributions, it adapts, both locally and globally, to the geometry of the distribution. In practice, the IEM can be computed using a learned denoiser (analogous to generative diffusion models) and solving a one-dimensional integral. To demonstrate the value of our framework, we learn an IEM on the ImageNet database. Experiments show that this IEM is competitive with or outperforms state-of-the-art supervised image quality metrics in predicting human perceptual judgments.

In machine learning, there is a long history of trying to build neural networks that can learn from fewer example data by baking in strong geometric priors. However, it is not always clear a priori what geometric constraints are appropriate for a given task. Here, we explore the possibility that one can uncover useful geometric inductive biases by studying how training molds the Riemannian geometry induced by unconstrained neural network feature maps. We first show that at infinite width, neural networks with random parameters induce highly symmetric metrics on input space. This symmetry is broken by feature learning: networks trained to perform classification tasks learn to magnify local areas along decision boundaries. This holds in deep networks trained on high-dimensional image classification tasks, and even in self-supervised representation learning. These results begin to elucidate how training shapes the geometry induced by unconstrained neural network feature maps, laying the groundwork for an understanding of this richly nonlinear form of feature learning.

We analyze surface patches with a corner that is rounded in the sense that the partial derivatives at that point are antiparallel. Sufficient conditions for G^1 smoothness are given, which, up to a certain degenerate case, are also necessary. Further, we investigate curvature integrability and present examples

Audio-visual zero-shot learning aims to classify samples consisting of a pair of corresponding audio and video sequences from classes that are not present during training. An analysis of the audio-visual data reveals a large degree of hyperbolicity, indicating the potential benefit of using a hyperbolic transformation to achieve curvature-aware geometric learning, with the aim of exploring more complex hierarchical data structures for this task. The proposed approach employs a novel loss function that incorporates cross-modality alignment between video and audio features in the hyperbolic space. Additionally, we explore the use of multiple adaptive curvatures for hyperbolic projections. The experimental results on this very challenging task demonstrate that our proposed hyperbolic approach for zero-shot learning outperforms the SOTA method on three datasets: VGGSound-GZSL, UCF-GZSL, and ActivityNet-GZSL achieving a harmonic mean (HM) improvement of around 3.0%, 7.0%, and 5.3%, respectively.

We explicitly construct a pair of immersed tori in three dimensional Euclidean space that are related by a mean curvature preserving isometry. These Bonnet pair tori are the first examples of compact Bonnet pairs. This resolves a longstanding open problem on whether the metric and mean curvature function determine a unique smooth compact immersion. Moreover, we prove these isometric tori are real analytic. This resolves a second longstanding open problem on whether real analyticity of the metric already determines a unique compact immersion. Our construction uses the relationship between Bonnet pairs and isothermic surfaces. The Bonnet pair tori arise as conformal transformations of an isothermic torus with one family of planar curvature lines. We classify such isothermic tori in our companion paper (arXiv:2312.14956). The above approach stems from computational investigations of a 5x7 quad decomposition of a torus using a discrete differential geometric analog of isothermic surfaces and Bonnet pairs.

Existing oriented object detection methods commonly use metric AP_{50} to measure the performance of the model. We argue that AP_{50} is inherently unsuitable for oriented object detection due to its large tolerance in angle deviation. Therefore, we advocate using high-precision metric, e.g. AP_{75}, to measure the performance of models. In this paper, we propose an Aspect Ratio Sensitive Oriented Object Detector with Transformer, termed ARS-DETR, which exhibits a competitive performance in high-precision oriented object detection. Specifically, a new angle classification method, calling Aspect Ratio aware Circle Smooth Label (AR-CSL), is proposed to smooth the angle label in a more reasonable way and discard the hyperparameter that introduced by previous work (e.g. CSL). Then, a rotated deformable attention module is designed to rotate the sampling points with the corresponding angles and eliminate the misalignment between region features and sampling points. Moreover, a dynamic weight coefficient according to the aspect ratio is adopted to calculate the angle loss. Comprehensive experiments on several challenging datasets show that our method achieves competitive performance on the high-precision oriented object detection task.

In a multi-task learning (MTL) setting, a single model is trained to tackle a diverse set of tasks jointly. Despite rapid progress in the field, MTL remains challenging due to optimization issues such as conflicting and dominating gradients. In this work, we propose using a condition number of a linear system of gradients as a stability criterion of an MTL optimization. We theoretically demonstrate that a condition number reflects the aforementioned optimization issues. Accordingly, we present Aligned-MTL, a novel MTL optimization approach based on the proposed criterion, that eliminates instability in the training process by aligning the orthogonal components of the linear system of gradients. While many recent MTL approaches guarantee convergence to a minimum, task trade-offs cannot be specified in advance. In contrast, Aligned-MTL provably converges to an optimal point with pre-defined task-specific weights, which provides more control over the optimization result. Through experiments, we show that the proposed approach consistently improves performance on a diverse set of MTL benchmarks, including semantic and instance segmentation, depth estimation, surface normal estimation, and reinforcement learning. The source code is publicly available at https://github.com/SamsungLabs/MTL .

Diffusion models have achieved remarkable success in text-to-image synthesis, largely attributed to the use of classifier-free guidance (CFG), which enables high-quality, condition-aligned image generation. CFG combines the conditional score (e.g., text-conditioned) with the unconditional score to control the output. However, the unconditional score is in charge of estimating the transition between manifolds of adjacent timesteps from x_t to x_{t-1}, which may inadvertently interfere with the trajectory toward the specific condition. In this work, we introduce a novel approach that leverages a geometric perspective on the unconditional score to enhance CFG performance when conditional scores are available. Specifically, we propose a method that filters the singular vectors of both conditional and unconditional scores using singular value decomposition. This filtering process aligns the unconditional score with the conditional score, thereby refining the sampling trajectory to stay closer to the manifold. Our approach improves image quality with negligible additional computation. We provide deeper insights into the score function behavior in diffusion models and present a practical technique for achieving more accurate and contextually coherent image synthesis.

Muon improves training efficiency over Adam in large language-model training by about two times, but the local geometric source of this advantage remains unclear. Our work takes a first step toward demystifying Muon's superiority over Adam from a curvature perspective. First, we apply a second-order Taylor approximation to the training landscape and show that Muon achieves a larger one-step loss decrease than Adam at matched validation loss. The two optimizers have comparable first-order gains, but Muon consistently incurs a smaller second-order curvature penalty. Second, we decompose this curvature penalty into the squared update norm and Normalized Directional Sharpness (NDS). We find that Muon and Adam have comparable update norms, so Muon's smaller curvature penalty is driven by lower NDS, not update scale. Third, we study how training data and model structure shape Muon's NDS advantage. Using Zipf-Probabilistic Context-Free Grammar (PCFG) data with controlled imbalance, we show that data imbalance amplifies Muon's NDS advantage over Adam. A within-/cross-layer decomposition further shows that, in the middle and late stages of training, Muon's lower NDS is mainly sustained by smaller within-layer curvature. Beyond empirical evidence, we analyze stylized quadratic problems with heterogeneous curvature and gradient alignment toward high-curvature modes. We prove that Muon attains a smaller average NDS than GD by balancing update energy across curvature groups; when curvature heterogeneity is sufficiently strong, this also yields lower local quadratic loss after the same number of steps.

We propose Riemannian Flow Matching (RFM), a simple yet powerful framework for training continuous normalizing flows on manifolds. Existing methods for generative modeling on manifolds either require expensive simulation, are inherently unable to scale to high dimensions, or use approximations for limiting quantities that result in biased training objectives. Riemannian Flow Matching bypasses these limitations and offers several advantages over previous approaches: it is simulation-free on simple geometries, does not require divergence computation, and computes its target vector field in closed-form. The key ingredient behind RFM is the construction of a relatively simple premetric for defining target vector fields, which encompasses the existing Euclidean case. To extend to general geometries, we rely on the use of spectral decompositions to efficiently compute premetrics on the fly. Our method achieves state-of-the-art performance on many real-world non-Euclidean datasets, and we demonstrate tractable training on general geometries, including triangular meshes with highly non-trivial curvature and boundaries.

Symmetric Positive Definite (SPD) matrices are ubiquitous in data analysis under the form of covariance matrices or correlation matrices. Several O(n)-invariant Riemannian metrics were defined on the SPD cone, in particular the kernel metrics introduced by Hiai and Petz. The class of kernel metrics interpolates between many classical O(n)-invariant metrics and it satisfies key results of stability and completeness. However, it does not contain all the classical O(n)-invariant metrics. Therefore in this work, we investigate super-classes of kernel metrics and we study which key results remain true. We also introduce an additional key result called cometric-stability, a crucial property to implement geodesics with a Hamiltonian formulation. Our method to build intermediate embedded classes between O(n)-invariant metrics and kernel metrics is to give a characterization of the whole class of O(n)-invariant metrics on SPD matrices and to specify requirements on metrics one by one until we reach kernel metrics. As a secondary contribution, we synthesize the literature on the main O(n)-invariant metrics, we provide the complete formula of the sectional curvature of the affine-invariant metric and the formula of the geodesic parallel transport between commuting matrices for the Bures-Wasserstein metric.

A fundamental challenge in data science is to match disparate point sets with each other. While optimal transport efficiently minimizes point displacements under a bijectivity constraint, it is inherently sensitive to rotations. Conversely, minimizing distortions via the Gromov-Wasserstein (GW) framework addresses this limitation but introduces a non-convex, computationally demanding optimization problem. In this work, we identify a broad class of distortion penalties that reduce to a simple alignment problem within a lifted feature space. Leveraging this insight, we introduce an iterative GW solver with a linear memory footprint and quadratic (rather than cubic) time complexity. Our method is differentiable, comes with strong theoretical guarantees, and scales to hundreds of thousands of points in minutes. This efficiency unlocks a wide range of geometric applications and enables the exploration of the GW energy landscape, whose local minima encode the symmetries of the matching problem.

A striking geometric disparity has long persisted in the practice of deep learning. While modern neural network architectures naturally exhibit rich symmetry and equivariance properties, popular optimizers such as Adam and its variants operate inherently coordinate-wise, rendering them unable to respect the equivariance structures of the parameter space. We address this disparity by introducing a symmetry-compatible principle for optimizer design: the gradient update rule should be equivariant under the symmetry group acting on the corresponding weight block. Following this principle, we first provide a unified perspective on bi-orthogonally equivariant updates for general matrix layers, as employed by stochastic spectral descent, Muon, Scion, and polar gradient methods. More importantly, by moving from orthogonal groups to permutation and shared-shift symmetries, we derive symmetry-compatible optimizers for parameter blocks whose symmetries differ from those of general matrix layers: embedding and LM head matrices, SwiGLU MLP projections, and MoE router matrices. These constructions include one-sided spectral, row-norm, hybrid row-norm/spectral, row-aware, column-aware, centered row-norm, and left-spectral updates. They yield an end-to-end layerwise optimizer stack in which each major matrix-valued parameter class is assigned an update whose equivariance matches its symmetry group. We corroborate this principle through pre-training experiments on dense and sparse MoE language models, including Qwen3-0.6B-style, Gemma 3 1B-style, OLMoE-1B-7B-style, and downsized gpt-oss architectures. Across these experiments, symmetry-compatible updates consistently improve final validation loss, and in several cases training stability, over corresponding AdamW updates.

Large language models (LLMs) have shown the ability to produce fluent and cogent content, presenting both productivity opportunities and societal risks. To build trustworthy AI systems, it is imperative to distinguish between machine-generated and human-authored content. The leading zero-shot detector, DetectGPT, showcases commendable performance but is marred by its intensive computational costs. In this paper, we introduce the concept of conditional probability curvature to elucidate discrepancies in word choices between LLMs and humans within a given context. Utilizing this curvature as a foundational metric, we present **Fast-DetectGPT**, an optimized zero-shot detector, which substitutes DetectGPT's perturbation step with a more efficient sampling step. Our evaluations on various datasets, source models, and test conditions indicate that Fast-DetectGPT not only surpasses DetectGPT by a relative around 75% in both the white-box and black-box settings but also accelerates the detection process by a factor of 340, as detailed in Table 1. See https://github.com/baoguangsheng/fast-detect-gpt for code, data, and results.

Unified visual grounding pursues a simple and generic technical route to leverage multi-task data with less task-specific design. The most advanced methods typically present boxes and masks as vertex sequences to model referring detection and segmentation as an autoregressive sequential vertex generation paradigm. However, generating high-dimensional vertex sequences sequentially is error-prone because the upstream of the sequence remains static and cannot be refined based on downstream vertex information, even if there is a significant location gap. Besides, with limited vertexes, the inferior fitting of objects with complex contours restricts the performance upper bound. To deal with this dilemma, we propose a parallel vertex generation paradigm for superior high-dimension scalability with a diffusion model by simply modifying the noise dimension. An intuitive materialization of our paradigm is Parallel Vertex Diffusion (PVD) to directly set vertex coordinates as the generation target and use a diffusion model to train and infer. We claim that it has two flaws: (1) unnormalized coordinate caused a high variance of loss value; (2) the original training objective of PVD only considers point consistency but ignores geometry consistency. To solve the first flaw, Center Anchor Mechanism (CAM) is designed to convert coordinates as normalized offset values to stabilize the training loss value. For the second flaw, Angle summation loss (ASL) is designed to constrain the geometry difference of prediction and ground truth vertexes for geometry-level consistency. Empirical results show that our PVD achieves state-of-the-art in both referring detection and segmentation, and our paradigm is more scalable and efficient than sequential vertex generation with high-dimension data.

We present a computational framework that transforms single images into 3D physical objects. The visual geometry of a physical object in an image is determined by three orthogonal attributes: mechanical properties, external forces, and rest-shape geometry. Existing single-view 3D reconstruction methods often overlook this underlying composition, presuming rigidity or neglecting external forces. Consequently, the reconstructed objects fail to withstand real-world physical forces, resulting in instability or undesirable deformation -- diverging from their intended designs as depicted in the image. Our optimization framework addresses this by embedding physical compatibility into the reconstruction process. We explicitly decompose the three physical attributes and link them through static equilibrium, which serves as a hard constraint, ensuring that the optimized physical shapes exhibit desired physical behaviors. Evaluations on a dataset collected from Objaverse demonstrate that our framework consistently enhances the physical realism of 3D models over existing methods. The utility of our framework extends to practical applications in dynamic simulations and 3D printing, where adherence to physical compatibility is paramount.

Despite significant work on low-bit quantization-aware training (QAT), there is still a large accuracy gap between such techniques and native training. To address this, we introduce CAGE (Curvature-Aware Gradient Estimation), a new QAT method that augments the straight-through estimator (STE) gradient with a curvature-aware correction designed to counteract the loss increase induced by quantization. CAGE is derived from a multi-objective view of QAT that balances loss minimization with adherence to quantization constraints, yielding a principled correction term that depends on local curvature information. On the theoretical side, we introduce the notion of Pareto-optimal solutions for quantized optimization, and establish that CAGE yields strong convergence guarantees in the smooth non-convex setting. In terms of implementation, our approach is optimizer-agnostic, but we provide a highly-efficient implementation that leverages Adam statistics. When pre-training Llama-style models of up to 800M-parameters, CAGE recovers over 10% of the quantization-induced loss increase in the W4A4 regime over outlier-mitigation methods. These results indicate that curvature-aware gradient corrections can bridge the remaining performance gap beyond current outlier-handling methods.

Transformers achieve strong performance across diverse domains but implicitly assume Euclidean geometry in their attention mechanisms, limiting their effectiveness on data with non-Euclidean structure. While recent extensions to hyperbolic and spherical spaces show promise for hierarchical and cyclical patterns, respectively, they require committing to a single geometry a priori, reducing flexibility when data exhibits mixed geometric properties. We introduce the Curvature-Adaptive Transformer (CAT), a novel architecture that dynamically learns per-token routing across three geometric attention branches through a lightweight, differentiable gating mechanism. Unlike fixed-geometry approaches, CAT enables adaptive geometric specialization, routing tokens to the appropriate curvature based on their local relational structure. The routing network provides interpretable curvature preferences while each branch employs geometry-specific operations optimized for its respective manifold. On knowledge graph completion benchmarks (FB15k-237, WN18RR), CAT achieves approximately 10% improvements in MRR and Hits@10 over fixed-geometry baselines with minimal overhead (5% parameter increase, comparable inference time). These results demonstrate that learned geometric adaptation outperforms any single fixed geometry for complex relational reasoning, establishing CAT as a scalable and interpretable foundation for mixture-of-geometry architectures across language, vision, and multimodal domains.

In the realm of computer vision and graphics, accurately establishing correspondences between geometric 3D shapes is pivotal for applications like object tracking, registration, texture transfer, and statistical shape analysis. Moving beyond traditional hand-crafted and data-driven feature learning methods, we incorporate spectral methods with deep learning, focusing on functional maps (FMs) and optimal transport (OT). Traditional OT-based approaches, often reliant on entropy regularization OT in learning-based framework, face computational challenges due to their quadratic cost. Our key contribution is to employ the sliced Wasserstein distance (SWD) for OT, which is a valid fast optimal transport metric in an unsupervised shape matching framework. This unsupervised framework integrates functional map regularizers with a novel OT-based loss derived from SWD, enhancing feature alignment between shapes treated as discrete probability measures. We also introduce an adaptive refinement process utilizing entropy regularized OT, further refining feature alignments for accurate point-to-point correspondences. Our method demonstrates superior performance in non-rigid shape matching, including near-isometric and non-isometric scenarios, and excels in downstream tasks like segmentation transfer. The empirical results on diverse datasets highlight our framework's effectiveness and generalization capabilities, setting new standards in non-rigid shape matching with efficient OT metrics and an adaptive refinement module.

Alignment and uniformity are fundamental principles within the domain of contrastive learning. In recommender systems, prior work has established that optimizing the Bayesian Personalized Ranking (BPR) loss contributes to the objectives of alignment and uniformity. Specifically, alignment aims to draw together the representations of interacting users and items, while uniformity mandates a uniform distribution of user and item embeddings across a unit hypersphere. This study revisits the alignment and uniformity properties within the context of multimodal recommender systems, revealing a proclivity among extant models to prioritize uniformity to the detriment of alignment. Our hypothesis challenges the conventional assumption of equitable item treatment through a uniformity loss, proposing a more nuanced approach wherein items with similar multimodal attributes converge toward proximal representations within the hyperspheric manifold. Specifically, we leverage the inherent similarity between items' multimodal data to calibrate their uniformity distribution, thereby inducing a more pronounced repulsive force between dissimilar entities within the embedding space. A theoretical analysis elucidates the relationship between this calibrated uniformity loss and the conventional uniformity function. Moreover, to enhance the fusion of multimodal features, we introduce a Spherical B\'ezier method designed to integrate an arbitrary number of modalities while ensuring that the resulting fused features are constrained to the same hyperspherical manifold. Empirical evaluations conducted on five real-world datasets substantiate the superiority of our approach over competing baselines. We also shown that the proposed methods can achieve up to a 5.4% increase in NDCG@20 performance via the integration of MLLM-extracted features. Source code is available at: https://github.com/enoche/CM3.

Recently, methods leveraging diffusion model priors to assist monocular geometric estimation (e.g., depth and normal) have gained significant attention due to their strong generalization ability. However, most existing works focus on estimating geometric properties within the camera coordinate system of individual video frames, neglecting the inherent ability of diffusion models to determine inter-frame correspondence. In this work, we demonstrate that, through appropriate design and fine-tuning, the intrinsic consistency of video generation models can be effectively harnessed for consistent geometric estimation. Specifically, we 1) select geometric attributes in the global coordinate system that share the same correspondence with video frames as the prediction targets, 2) introduce a novel and efficient conditioning method by reusing positional encodings, and 3) enhance performance through joint training on multiple geometric attributes that share the same correspondence. Our results achieve superior performance in predicting global geometric attributes in videos and can be directly applied to reconstruction tasks. Even when trained solely on static video data, our approach exhibits the potential to generalize to dynamic video scenes.

It has recently been discovered that using a pre-trained vision-language model (VLM), e.g., CLIP, to align a whole query image with several finer text descriptions generated by a large language model can significantly enhance zero-shot performance. However, in this paper, we empirically find that the finer descriptions tend to align more effectively with local areas of the query image rather than the whole image, and then we theoretically validate this finding. Thus, we present a method called weighted visual-text cross alignment (WCA). This method begins with a localized visual prompting technique, designed to identify local visual areas within the query image. The local visual areas are then cross-aligned with the finer descriptions by creating a similarity matrix using the pre-trained VLM. To determine how well a query image aligns with each category, we develop a score function based on the weighted similarities in this matrix. Extensive experiments demonstrate that our method significantly improves zero-shot performance across various datasets, achieving results that are even comparable to few-shot learning methods.

Do contemporary diffusion models preserve the class geometry of hyperspherical data? Standard diffusion models rely on isotropic Gaussian noise in the forward process, inherently favoring Euclidean spaces. However, many real-world problems involve non-Euclidean distributions, such as hyperspherical manifolds, where class-specific patterns are governed by angular geometry within hypercones. When modeled in Euclidean space, these angular subtleties are lost, leading to suboptimal generative performance. To address this limitation, we introduce HyperSphereDiff to align hyperspherical structures with directional noise, preserving class geometry and effectively capturing angular uncertainty. We demonstrate both theoretically and empirically that this approach aligns the generative process with the intrinsic geometry of hyperspherical data, resulting in more accurate and geometry-aware generative models. We evaluate our framework on four object datasets and two face datasets, showing that incorporating angular uncertainty better preserves the underlying hyperspherical manifold. Resources are available at: {https://github.com/IAB-IITJ/Harmonizing-Geometry-and-Uncertainty-Diffusion-with-Hyperspheres/}

Regression-based methods have recently shown promising results in reconstructing human meshes from monocular images. By directly mapping raw pixels to model parameters, these methods can produce parametric models in a feed-forward manner via neural networks. However, minor deviation in parameters may lead to noticeable misalignment between the estimated meshes and image evidences. To address this issue, we propose a Pyramidal Mesh Alignment Feedback (PyMAF) loop to leverage a feature pyramid and rectify the predicted parameters explicitly based on the mesh-image alignment status in our deep regressor. In PyMAF, given the currently predicted parameters, mesh-aligned evidences will be extracted from finer-resolution features accordingly and fed back for parameter rectification. To reduce noise and enhance the reliability of these evidences, an auxiliary pixel-wise supervision is imposed on the feature encoder, which provides mesh-image correspondence guidance for our network to preserve the most related information in spatial features. The efficacy of our approach is validated on several benchmarks, including Human3.6M, 3DPW, LSP, and COCO, where experimental results show that our approach consistently improves the mesh-image alignment of the reconstruction. The project page with code and video results can be found at https://hongwenzhang.github.io/pymaf.

Transfer learning is a crucial technique for handling a small amount of data that is potentially related to other abundant data. However, most of the existing methods are focused on classification tasks using images and language datasets. Therefore, in order to expand the transfer learning scheme to regression tasks, we propose a novel transfer technique based on differential geometry, namely the Geometrically Aligned Transfer Encoder (GATE). In this method, we interpret the latent vectors from the model to exist on a Riemannian curved manifold. We find a proper diffeomorphism between pairs of tasks to ensure that every arbitrary point maps to a locally flat coordinate in the overlapping region, allowing the transfer of knowledge from the source to the target data. This also serves as an effective regularizer for the model to behave in extrapolation regions. In this article, we demonstrate that GATE outperforms conventional methods and exhibits stable behavior in both the latent space and extrapolation regions for various molecular graph datasets.

Monocular depth estimation is an important task with rapid progress, but how to evaluate it is not fully resolved, as evidenced by a lack of standardization in existing literature and a large selection of evaluation metrics whose trade-offs and behaviors are not fully understood. This paper contributes a novel, quantitative analysis of existing metrics in terms of their sensitivity to various types of perturbations of ground truth, emphasizing comparison to human judgment. Our analysis reveals that existing metrics are severely under-sensitive to curvature perturbation such as making smooth surfaces bumpy. To remedy this, we introduce a new metric based on relative surface normals, along with new depth visualization tools and a principled method to create composite metrics with better human alignment. Code and data are available at: https://github.com/princeton-vl/evalmde.

We address the problem of aligning real-world 3D data of garments, which benefits many applications such as texture learning, physical parameter estimation, generative modeling of garments, etc. Existing extrinsic methods typically perform non-rigid iterative closest point and struggle to align details due to incorrect closest matches and rigidity constraints. While intrinsic methods based on functional maps can produce high-quality correspondences, they work under isometric assumptions and become unreliable for garment deformations which are highly non-isometric. To achieve wrinkle-level as well as texture-level alignment, we present a novel coarse-to-fine two-stage method that leverages intrinsic manifold properties with two neural deformation fields, in the 3D space and the intrinsic space, respectively. The coarse stage performs a 3D fitting, where we leverage intrinsic manifold properties to define a manifold deformation field. The coarse fitting then induces a functional map that produces an alignment of intrinsic embeddings. We further refine the intrinsic alignment with a second neural deformation field for higher accuracy. We evaluate our method with our captured garment dataset, GarmCap. The method achieves accurate wrinkle-level and texture-level alignment and works for difficult garment types such as long coats. Our project page is https://jsnln.github.io/iccv2023_intrinsic/index.html.

Rib fractures are common and time-consuming to localize on computed tomography (CT). We ask whether fractures detected independently in two orthogonal CT-derived projections (anteroposterior and lateral) can be paired across views and triangulated into reliable 3D points at a controlled rate of false outputs, and we answer it with a staged diagnostic study. The projection geometry is exact, and given correct correspondence, localization is accurate (median 4.0 mm, 88% within 10 mm, 93.6% rib-exact). On a sealed 55-case cohort, a large share of fractures is in principle recoverable (61.1% dual-view availability, and a correct pair present in the candidate graph for 58.4% of fractures), yet the binding limitation is neither geometry nor localization but confidence-limited cross-view correspondence. A controlled detector-by-correspondence factorial attributes the operational gain to lateral-detector quality rather than the tested matching methods; retraining the lateral detector produces the first nonzero controlled-budget reconstructions. Under a deliberately conservative commitment policy, a pre-specified sealed pass promotes 15 of 601 fractures to correct 3D localizations at 0.436 false points per case (2.50% end-to-end commitment yield), and committed points are accurate (median 1.49 mm, 93% rib-exact). The low yield is a consequence of confidence-gated abstention, not of geometry or detection: the study establishes a reproducible framework for selective 3D localization and identifies cross-view correspondence as the dominant operational bottleneck.

PGD adversarial training, the standard robustness method, can reduce Jacobian Frobenius norm yet worsen clean-input geometry (e.g., TDI 1.336 vs. ERM 1.093). We show this is not an implementation artifact but a theorem-level consequence of supervised learning. We prove that any encoder minimizing supervised loss must retain non-zero sensitivity along directions correlated with training labels, including directions that are nuisance at test time. This holds across proper scoring rules, architectures, and dataset sizes. We call this the geometric blind spot of supervised learning. This theorem unifies four empirical phenomena often treated separately: non-robust features, texture bias, corruption fragility, and the robustness-accuracy tradeoff. It also explains why suppressing sensitivity in one adversarial direction can redistribute sensitivity elsewhere. We introduce Trajectory Deviation Index (TDI), a diagnostic of geometric isotropy. Unlike CKA, intrinsic dimension, or Jacobian Frobenius norm alone, TDI captures the failure mode above. In our experiments, PGD attains low Frobenius norm but high TDI, while PMH attains the lowest TDI with one additional training term and no architectural changes. Across seven tasks, BERT/SST-2, and ImageNet ViT-B/16 (backbone family underlying CLIP/DINO/SAM), the blind spot is measurable and repairable. It appears at foundation-model scale, worsens with model scale and task-specific fine-tuning, and is substantially reduced by PMH. PMH also leads on non-Gaussian corruption types (blur/brightness/contrast) without corruption-specific training.

Over the years many ellipse detection algorithms spring up and are studied broadly, while the critical issue of detecting ellipses accurately and efficiently in real-world images remains a challenge. In this paper, we propose a valuable industry-oriented ellipse detector by arc-support line segments, which simultaneously reaches high detection accuracy and efficiency. To simplify the complicated curves in an image while retaining the general properties including convexity and polarity, the arc-support line segments are extracted, which grounds the successful detection of ellipses. The arc-support groups are formed by iteratively and robustly linking the arc-support line segments that latently belong to a common ellipse. Afterward, two complementary approaches, namely, locally selecting the arc-support group with higher saliency and globally searching all the valid paired groups, are adopted to fit the initial ellipses in a fast way. Then, the ellipse candidate set can be formulated by hierarchical clustering of 5D parameter space of initial ellipses. Finally, the salient ellipse candidates are selected and refined as detections subject to the stringent and effective verification. Extensive experiments on three public datasets are implemented and our method achieves the best F-measure scores compared to the state-of-the-art methods. The source code is available at https://github.com/AlanLuSun/High-quality-ellipse-detection.

Generating a street-level 3D scene from a single satellite image is a crucial yet challenging task. Current methods present a stark trade-off: geometry-colorization models achieve high geometric fidelity but are typically building-focused and lack semantic diversity. In contrast, proxy-based models use feed-forward image-to-3D frameworks to generate holistic scenes by jointly learning geometry and texture, a process that yields rich content but coarse and unstable geometry. We attribute these geometric failures to the extreme viewpoint gap and sparse, inconsistent supervision inherent in satellite-to-street data. We introduce Sat3DGen to address these fundamental challenges, which embodies a geometry-first methodology. This methodology enhances the feed-forward paradigm by integrating novel geometric constraints with a perspective-view training strategy, explicitly countering the primary sources of geometric error. This geometry-centric strategy yields a dramatic leap in both 3D accuracy and photorealism. For validation, we first constructed a new benchmark by pairing the VIGOR-OOD test set with high-resolution DSM data. On this benchmark, our method improves geometric RMSE from 6.76m to 5.20m. Crucially, this geometric leap also boosts photorealism, reducing the Fréchet Inception Distance (FID) from sim40 to 19 against the leading method, Sat2Density++, despite using no extra tailored image-quality modules. We demonstrate the versatility of our high-quality 3D assets through diverse downstream applications, including semantic-map-to-3D synthesis, multi-camera video generation, large-scale meshing, and unsupervised single-image Digital Surface Model (DSM) estimation. The code has been released on https://github.com/qianmingduowan/Sat3DGen.

Large language model (LLM)-enhanced recommendation models inject LLM representations into backbone recommenders to exploit rich item text without inference-time LLM cost. However, we find that existing LLM-enhanced methods significantly hinder the optimization of backbone models, resulting in high training losses that are difficult to reduce. To address it, we establish a comprehensive theoretical analysis of local optimization curvature and identify two key causes: 1) large norm disparity and 2) semantic-collaboration misaligned angular clustering of LLM representations. Guided by these insights, we propose Training-Friendly LLM-Enhanced Recommender (TF-LLMER), a lightweight framework with two key components. First, we highlight the necessity of item embedding normalization to eliminate norm-driven instability and achieve provable control over optimization conditioning. Second, we introduce Rec-PCA, a recommendation-aware dimensionality reduction method that injects collaborative structure into the representation transformation to resolve semantic-collaboration misaligned angular clustering. It jointly optimizes semantic information retention and alignment with an item-item co-occurrence graph constructed from interaction histories. The graph captures collaborative structure, and alignment is promoted by penalizing total variation over the graph. Both theory and extensive experiments demonstrate that TF-LLMER significantly outperforms state-of-the-art methods. Our code is available at https://github.com/woriazzc/TF-LLMER.

This paper investigates the generalization of Principal Component Analysis (PCA) to Riemannian manifolds. We first propose a new and general type of family of subspaces in manifolds that we call barycentric subspaces. They are implicitly defined as the locus of points which are weighted means of k+1 reference points. As this definition relies on points and not on tangent vectors, it can also be extended to geodesic spaces which are not Riemannian. For instance, in stratified spaces, it naturally allows principal subspaces that span several strata, which is impossible in previous generalizations of PCA. We show that barycentric subspaces locally define a submanifold of dimension k which generalizes geodesic subspaces.Second, we rephrase PCA in Euclidean spaces as an optimization on flags of linear subspaces (a hierarchy of properly embedded linear subspaces of increasing dimension). We show that the Euclidean PCA minimizes the Accumulated Unexplained Variances by all the subspaces of the flag (AUV). Barycentric subspaces are naturally nested, allowing the construction of hierarchically nested subspaces. Optimizing the AUV criterion to optimally approximate data points with flags of affine spans in Riemannian manifolds lead to a particularly appealing generalization of PCA on manifolds called Barycentric Subspaces Analysis (BSA).

Modern feed-forward 3D reconstruction methods like VGGT predict pixel-aligned pointmaps in camera-centric coordinate frames. However, this choice of coordinate frame is not always optimal. We propose instead to predict pointmaps in upright, gravity-aligned frames that exploit strong structural cues present in many real-world scenes. Unlike camera-centric frames, gravity-aligned frames share a common vertical axis across viewpoints, reducing the rotational degrees of freedom needed to relate pointmaps to one another. To this end, we introduce the Gravity Grounded Geometry Transformer (G3T), fine-tuned from existing models on gravity-aligned 3D data. G3T produces highly accurate gravity-aware predictions, including upright pointmaps and camera-to-gravity poses. We further introduce G3T-Long, a submap-based incremental 3D reconstruction pipeline that leverages the reduced rotational degrees of freedom afforded by upright frames to achieve significantly improved reconstruction accuracy.

Dimensionality reduction is a fundamental task that aims to simplify complex data by reducing its feature dimensionality while preserving essential patterns, with core applications in data analysis and visualisation. To preserve the underlying data structure, multi-dimensional scaling (MDS) methods focus on preserving pairwise dissimilarities, such as distances. They optimise the embedding to have pairwise distances as close as possible to the data dissimilarities. However, the current standard is limited to embedding data in Riemannian manifolds. Motivated by the lack of asymmetry in the Riemannian metric of the embedding space, this paper extends the MDS problem to a natural asymmetric generalisation of Riemannian manifolds called Finsler manifolds. Inspired by Euclidean space, we define a canonical Finsler space for embedding asymmetric data. Due to its simplicity with respect to geodesics, data representation in this space is both intuitive and simple to analyse. We demonstrate that our generalisation benefits from the same theoretical convergence guarantees. We reveal the effectiveness of our Finsler embedding across various types of non-symmetric data, highlighting its value in applications such as data visualisation, dimensionality reduction, directed graph embedding, and link prediction.

Recent advances in diffusion and flow matching models have highlighted a shift in the preferred prediction target -- moving from noise (varepsilon) and velocity (v) to direct data (x) prediction -- particularly in high-dimensional settings. However, a formal explanation of why the optimal target depends on the specific properties of the data remains elusive. In this work, we provide a theoretical framework based on a generalized prediction formulation that accommodates arbitrary output targets, of which varepsilon-, v-, and x-prediction are special cases. We derive the analytical relationship between data's geometry and the optimal prediction target, offering a rigorous justification for why x-prediction becomes superior when the ambient dimension significantly exceeds the data's intrinsic dimension. Furthermore, while our theory identifies dimensionality as the governing factor for the optimal prediction target, the intrinsic dimension of manifold-bound data is typically intractable to estimate in practice. To bridge this gap, we propose k-Diff, a framework that employs a data-driven approach to learn the optimal prediction parameter k directly from data, bypassing the need for explicit dimension estimation. Extensive experiments in both latent-space and pixel-space image generation demonstrate that k-Diff consistently outperforms fixed-target baselines across varying architectures and data scales, providing a principled and automated approach to enhancing generative performance.

Emerging from low-level vision theory, steerable filters found their counterpart in prior work on steerable convolutional neural networks equivariant to rigid transformations. In our work, we propose a steerable feed-forward learning-based approach that consists of neurons with spherical decision surfaces and operates on point clouds. Such spherical neurons are obtained by conformal embedding of Euclidean space and have recently been revisited in the context of learning representations of point sets. Focusing on 3D geometry, we exploit the isometry property of spherical neurons and derive a 3D steerability constraint. After training spherical neurons to classify point clouds in a canonical orientation, we use a tetrahedron basis to quadruplicate the neurons and construct rotation-equivariant spherical filter banks. We then apply the derived constraint to interpolate the filter bank outputs and, thus, obtain a rotation-invariant network. Finally, we use a synthetic point set and real-world 3D skeleton data to verify our theoretical findings. The code is available at https://github.com/pavlo-melnyk/steerable-3d-neurons.

We present a novel approach to accelerate stochastic gradient descent (SGD) by utilizing curvature information obtained from Hessian-vector products or finite differences of parameters and gradients, similar to the BFGS algorithm. Our approach involves two preconditioners: a matrix-free preconditioner and a low-rank approximation preconditioner. We update both preconditioners online using a criterion that is robust to stochastic gradient noise and does not require line search or damping. To preserve the corresponding symmetry or invariance, our preconditioners are constrained to certain connected Lie groups. The Lie group's equivariance property simplifies the preconditioner fitting process, while its invariance property eliminates the need for damping, which is commonly required in second-order optimizers. As a result, the learning rate for parameter updating and the step size for preconditioner fitting are naturally normalized, and their default values work well in most scenarios. Our proposed approach offers a promising direction for improving the convergence of SGD with low computational overhead. We demonstrate that Preconditioned SGD (PSGD) outperforms SoTA on Vision, NLP, and RL tasks across multiple modern deep-learning architectures. We have provided code for reproducing toy and large scale experiments in this paper.

Industrial quality inspection plays a critical role in modern manufacturing by identifying defective products during production. While single-modality approaches using either 3D point clouds or 2D RGB images suffer from information incompleteness, multimodal anomaly detection offers promise through the complementary fusion of crossmodal data. However, existing methods face challenges in effectively integrating unimodal results and improving discriminative power. To address these limitations, we first reinterpret memory bank-based anomaly scores in single modalities as isotropic Euclidean distances in local feature spaces. Dynamically evolving from Euclidean metrics, we propose a novel Geometry-Guided Score Fusion (G^{2}SF) framework that progressively learns an anisotropic local distance metric as a unified score for the fusion task. Through a geometric encoding operator, a novel Local Scale Prediction Network (LSPN) is proposed to predict direction-aware scaling factors that characterize first-order local feature distributions, thereby enhancing discrimination between normal and anomalous patterns. Additionally, we develop specialized loss functions and score aggregation strategy from geometric priors to ensure both metric generalization and efficacy. Comprehensive evaluations on the MVTec-3D AD and Eyecandies datasets demonstrate the state-of-the-art detection performance of our method, and detailed ablation analysis validates each component's contribution. Our code is available at https://github.com/ctaoaa/G2SF.

Adversarial prompts capable of jailbreaking large language models (LLMs) and inducing undesirable behaviours pose a significant obstacle to their safe deployment. Current mitigation strategies rely on activating built-in defence mechanisms or fine-tuning the LLMs, but the fundamental distinctions between adversarial and benign prompts are yet to be understood. In this work, we introduce CurvaLID, a novel defense framework that efficiently detects adversarial prompts by leveraging their geometric properties. It is agnostic to the type of LLM, offering a unified detection framework across diverse adversarial prompts and LLM architectures. CurvaLID builds on the geometric analysis of text prompts to uncover their underlying differences. We theoretically extend the concept of curvature via the Whewell equation into an n-dimensional word embedding space, enabling us to quantify local geometric properties, including semantic shifts and curvature in the underlying manifolds. Additionally, we employ Local Intrinsic Dimensionality (LID) to capture geometric features of text prompts within adversarial subspaces. Our findings reveal that adversarial prompts differ fundamentally from benign prompts in terms of their geometric characteristics. Our results demonstrate that CurvaLID delivers superior detection and rejection of adversarial queries, paving the way for safer LLM deployment. The source code can be found at https://github.com/Cancanxxx/CurvaLID

This work puts forth a new optimal design formulation for planar elastic membranes. The goal is to minimize the membrane's compliance through choosing the material distribution described by a positive Radon measure. The deformation of the membrane itself is governed by the convexified F\"{o}ppl's model. The uniqueness of this model lies in the convexity of its variational formulation despite the inherent nonlinearity of the strain-displacement relation. It makes it possible to rewrite the optimization problem as a pair of mutually dual convex variational problems. In the primal problem a linear functional is maximized with respect to displacement functions while enforcing that point-wisely the strain lies in an unbounded closed convex set. The dual problem consists in finding equilibrated stresses that are to minimize a convex integral functional of linear growth defined on the space of Radon measures. The pair of problems is analysed: existence and regularity results are provided, together with the system of optimality criteria. To demonstrate the computational potential of the pair, a finite element scheme is developed around it. Upon reformulation to a conic-quadratic & semi-definite programming problem, the method is employed to produce numerical simulations for several load case scenarios.

Recent advances in generative models highlight the power of geometry-aware modeling in manifold-constrained settings. Yet, for natural images, the field remains confined to Euclidean assumptions, failing to exploit the potential of intrinsic geometric structures within the data. In this work, we investigate the geometry of natural images and observe that semantic information is predominantly encoded in directional components, while norm components can be approximated by the global average. This property holds across both RGB and latent spaces, suggesting that natural images can be effectively modeled on a hypersphere. Building on this finding, we introduce Spherical Optimal Transport Flow Matching (SOT-CFM), which utilizes angular distance, and Spherical Flow Matching (SFM), which constrains dynamics directly on the manifold. Our experiments demonstrate that these geometry-aware methods achieve superior performance against Euclidean baselines. Ultimately, this work provides a novel perspective that bridges the gap between Riemannian manifold-based modeling and natural image generation.

We present PVSeRF, a learning framework that reconstructs neural radiance fields from single-view RGB images, for novel view synthesis. Previous solutions, such as pixelNeRF, rely only on pixel-aligned features and suffer from feature ambiguity issues. As a result, they struggle with the disentanglement of geometry and appearance, leading to implausible geometries and blurry results. To address this challenge, we propose to incorporate explicit geometry reasoning and combine it with pixel-aligned features for radiance field prediction. Specifically, in addition to pixel-aligned features, we further constrain the radiance field learning to be conditioned on i) voxel-aligned features learned from a coarse volumetric grid and ii) fine surface-aligned features extracted from a regressed point cloud. We show that the introduction of such geometry-aware features helps to achieve a better disentanglement between appearance and geometry, i.e. recovering more accurate geometries and synthesizing higher quality images of novel views. Extensive experiments against state-of-the-art methods on ShapeNet benchmarks demonstrate the superiority of our approach for single-image novel view synthesis.

This paper addresses the task of zero-shot image classification. The key contribution of the proposed approach is to control the semantic embedding of images -- one of the main ingredients of zero-shot learning -- by formulating it as a metric learning problem. The optimized empirical criterion associates two types of sub-task constraints: metric discriminating capacity and accurate attribute prediction. This results in a novel expression of zero-shot learning not requiring the notion of class in the training phase: only pairs of image/attributes, augmented with a consistency indicator, are given as ground truth. At test time, the learned model can predict the consistency of a test image with a given set of attributes , allowing flexible ways to produce recognition inferences. Despite its simplicity, the proposed approach gives state-of-the-art results on four challenging datasets used for zero-shot recognition evaluation.

Reinforcement learning from human feedback (RLHF) for 3D generation is now established across a number of works, but most existing pipelines optimise explicit surface representations, often by converting radiance fields into meshes and training heavily on surface-supervised data. We instead fine-tune a pretrained 3D-aware generative model directly from a learned reward over radiance-field density (σ) values, with no externally supplied mesh or shape prior. The reward model requires no pretraining, trains easily on a small set of preference samples, and yields robust improvement in 3D geometry. Working on an unconditional 3D-aware face GAN (EG3D), our reward reads the continuous 3D density field of the neural radiance field (NeRF) directly and supplies a geometry-only learning signal, requiring neither text conditioning, mesh extraction, nor multi-view rendering. A density-consistency constraint keeps the 2D appearance qualitatively similar while the geometry is reshaped, at a measurable but bounded distributional cost (FID-50k rises from 4.09 to 6.66): the fine-tuned generator, trained from the preferences of a single annotator as a proof of concept, produces face geometries preferred by users in 74.4% of pairwise comparisons.

Aligning large visual generative models with human feedback is often performed through pairwise preference optimization. While such approaches are conceptually simple, they fundamentally rely on annotated pairs, limiting scalability in settings where feedback is collected as independent scalar ratings. In this work, we revisit the KL-regularized alignment objective and show that the optimal policy implicitly compares each sample's reward to an instance-specific baseline that is generally intractable. We propose a threshold-guided alignment framework that replaces this oracle baseline with a data-driven global threshold estimated from empirical score statistics. This formulation turns alignment into a binary decision task on unpaired data, enabling effective optimization directly from scalar feedback. We also incorporate a confidence weighting term to emphasize samples whose scores deviate strongly from the threshold, improving sample efficiency. Experiments across both diffusion and masked generative paradigms, spanning three test sets and five reward models, show that our method consistently improves preference alignment over previous methods. These results position our threshold-guided framework as a simple yet principled alternative for aligning visual generative models without paired comparisons.

Probabilistic models are typically trained using task-agnostic objectives like log-loss, which can lead to significant errors in downstream estimation. This disconnect is especially critical in Inverse Probability Weighting (IPW) for causal inference, where propensity score errors near 0 and 1 often lead to high bias and variance. We propose a principled framework for deriving task-specific strictly proper scoring rules by matching the local curvature of the downstream error metric. We apply this to the Average Treatment Effect (ATE) estimation, deriving a closed-form loss and its corresponding canonical probability mapping that can be readily integrated with any model like a neural network or a gradient boosting algorithm. Extensive evaluations on causal inference benchmarks demonstrate that our tailored objective consistently outperforms standard likelihood-based and covariate-balancing approaches.

Precise alignment in Text-to-Image (T2I) systems is crucial to ensure that generated visuals not only accurately encapsulate user intents but also conform to stringent ethical and aesthetic benchmarks. Incidents like the Google Gemini fiasco, where misaligned outputs triggered significant public backlash, underscore the critical need for robust alignment mechanisms. In contrast, Large Language Models (LLMs) have achieved notable success in alignment. Building on these advancements, researchers are eager to apply similar alignment techniques, such as Direct Preference Optimization (DPO), to T2I systems to enhance image generation fidelity and reliability. We present YinYangAlign, an advanced benchmarking framework that systematically quantifies the alignment fidelity of T2I systems, addressing six fundamental and inherently contradictory design objectives. Each pair represents fundamental tensions in image generation, such as balancing adherence to user prompts with creative modifications or maintaining diversity alongside visual coherence. YinYangAlign includes detailed axiom datasets featuring human prompts, aligned (chosen) responses, misaligned (rejected) AI-generated outputs, and explanations of the underlying contradictions.

The fluency and factual knowledge of large language models (LLMs) heightens the need for corresponding systems to detect whether a piece of text is machine-written. For example, students may use LLMs to complete written assignments, leaving instructors unable to accurately assess student learning. In this paper, we first demonstrate that text sampled from an LLM tends to occupy negative curvature regions of the model's log probability function. Leveraging this observation, we then define a new curvature-based criterion for judging if a passage is generated from a given LLM. This approach, which we call DetectGPT, does not require training a separate classifier, collecting a dataset of real or generated passages, or explicitly watermarking generated text. It uses only log probabilities computed by the model of interest and random perturbations of the passage from another generic pre-trained language model (e.g, T5). We find DetectGPT is more discriminative than existing zero-shot methods for model sample detection, notably improving detection of fake news articles generated by 20B parameter GPT-NeoX from 0.81 AUROC for the strongest zero-shot baseline to 0.95 AUROC for DetectGPT. See https://ericmitchell.ai/detectgpt for code, data, and other project information.

The annealing phase is a pivotal convergence stage in LLM pre-training that ultimately determines final model quality. However, effectively selecting training data during this phase remains a key challenge. Current strategies rely on empirical heuristics, such as domain filtering or context extension, which lack a principled grounding in optimization theory. In this work, we characterize the annealing phase through the lens of the loss landscape's spectral geometry. We argue that optimal convergence requires gradient updates to satisfy heterogeneous constraints across different eigen-directions. Building on this insight, we formulate data selection as a problem of satisfying these directional constraints. To this end, we propose DiReCT (Directionally-Restrained Constrained Training), a novel framework that reformulates sample selection in the annealing stage as a constrained optimization problem. By imposing explicit directional constraints on per-sample gradients based on the spectral properties of the Hessian, DiReCT identifies samples that align with the optimal curvature-aware descent path. Extensive experiments across various model scales demonstrate that DiReCT consistently achieves state-of-the-art performance. For future research, code is available at https://github.com/xuyj233/Direct.

Adolescent idiopathic scoliosis (AIS) is a lifetime disease that arises in children. Accurate estimation of Cobb angles of the scoliosis is essential for clinicians to make diagnosis and treatment decisions. The Cobb angles are measured according to the vertebrae landmarks. Existing regression-based methods for the vertebra landmark detection typically suffer from large dense mapping parameters and inaccurate landmark localization. The segmentation-based methods tend to predict connected or corrupted vertebra masks. In this paper, we propose a novel vertebra-focused landmark detection method. Our model first localizes the vertebra centers, based on which it then traces the four corner landmarks of the vertebra through the learned corner offset. In this way, our method is able to keep the order of the landmarks. The comparison results demonstrate the merits of our method in both Cobb angle measurement and landmark detection on low-contrast and ambiguous X-ray images. Code is available at: https://github.com/yijingru/Vertebra-Landmark-Detection.

Line segment detection is essential for high-level tasks in computer vision and robotics. Currently, most stateof-the-art (SOTA) methods are dedicated to detecting straight line segments in undistorted pinhole images, thus distortions on fisheye or spherical images may largely degenerate their performance. Targeting at the unified line segment detection (ULSD) for both distorted and undistorted images, we propose to represent line segments with the Bezier curve model. Then the line segment detection is tackled by the Bezier curve regression with an end-to-end network, which is model-free and without any undistortion preprocessing. Experimental results on the pinhole, fisheye, and spherical image datasets validate the superiority of the proposed ULSD to the SOTA methods both in accuracy and efficiency (40.6fps for pinhole images). The source code is available at https://github.com/lh9171338/Unified-LineSegment-Detection.

Alignment tuning is meant to make harmful-request refusal robust, yet this safety behavior can be erased by a small set of benign fine-tuning examples. This is a deployment risk for open-weight models because a checkpoint can pass refusal tests at release time and later lose refusal under low-cost downstream fine-tuning. Prior work has established these refusal failures, but existing studies do not show how to detect this fragility in the aligned model itself before an attack or fine-tuning intervention is run. We introduce Skin-Deep, a geometric diagnostic that detects alignment fragility directly from the aligned model's hidden-state activations before such an intervention is run and compresses the layer-wise safety geometry into a single scalar, the Geometric Fragility Score (GFS). Applied to twenty-one instruction-tuned models spanning six alignment recipes and 3B--32B parameters, Skin-Deep reveals a recurring low-rank safety subspace across model families. Direction ablations show that removing directions in this subspace weakens harmful-request refusal, providing causal evidence that the recovered geometry underlies refusal behavior. Crucially, GFS identifies, before any fine-tuning, the initially safe model that retains the most refusal after small-scale LoRA fine-tuning. These results establish GFS as a practical pre-deployment diagnostic for flagging fragile refusal behavior without running an attack.

While recent video diffusion models (VDMs) produce visually impressive results, they fundamentally struggle to maintain 3D structural consistency, often resulting in object deformation or spatial drift. We hypothesize that these failures arise because standard denoising objectives lack explicit incentives for geometric coherence. To address this, we introduce VideoGPA (Video Geometric Preference Alignment), a data-efficient self-supervised framework that leverages a geometry foundation model to automatically derive dense preference signals that guide VDMs via Direct Preference Optimization (DPO). This approach effectively steers the generative distribution toward inherent 3D consistency without requiring human annotations. VideoGPA significantly enhances temporal stability, physical plausibility, and motion coherence using minimal preference pairs, consistently outperforming state-of-the-art baselines in extensive experiments.

Video diffusion models lack explicit geometric supervision during training, leading to inconsistency artifacts such as object deformation, spatial drift, and depth violations in generated videos. To address this limitation, we propose a geometry-based reward model that leverages pretrained geometric foundation models to evaluate multi-view consistency through cross-frame reprojection error. Unlike previous geometric metrics that measure inconsistency in pixel space, where pixel intensity may introduce additional noise, our approach conducts error computation in a pointwise fashion, yielding a more physically grounded and robust error metric. Furthermore, we introduce a geometry-aware sampling strategy that filters out low-texture and non-semantic regions, focusing evaluation on geometrically meaningful areas with reliable correspondences to improve robustness. We apply this reward model to align video diffusion models through two complementary pathways: post-training of a bidirectional model via SFT or Reinforcement Learning and inference-time optimization of a Causal Video Model (e.g., Streaming video generator) via test-time scaling with our reward as a path verifier. Experimental results validate the effectiveness of our design, demonstrating that our geometry-based reward provides superior robustness compared to other variants. By enabling efficient inference-time scaling, our method offers a practical solution for enhancing open-source video models without requiring extensive computational resources for retraining.

Instruction tuning aligns large language models, including multimodal ones, with diverse user intents, but scaling to heterogeneous mixtures is hindered by gradient interference and bandwidth-heavy synchronization. We ask whether these two bottlenecks can be addressed jointly by training parts of the mixture independently and reconciling them once in parameter space. We develop a local quadratic theory inside a shared flat basin that yields three results: weight merging produces a curvature-weighted variance reduction; PCA-aligned conflict splitting maximizes this gain along high-curvature directions; and merging additionally acts as spectral filtering with implicit norm regularization. These results directly motivate MERIT, a decentralized merge-ready instruction-tuning pipeline that estimates dataset-level gradient conflicts, partitions the mixture along the top PCA conflict axes, fine-tunes each partition independently with no inter-partition communication, and merges once via token-weighted averaging. On Qwen2.5-VL-3B with 136 Vision-FLAN tasks, MERIT improves the 8-benchmark average from 54.3 (joint training) to 57.0. The same recipe scales to a 7B model on a 1.6M-example, 176-source mixture -- matching or exceeding centralized joint training with minimal cost overhead -- and transfers to text-only FLAN. Our code is available at https://github.com/naver-ai/merit.

Parameter-efficient adaptation of pretrained vision models is commonly performed through linear probes, prompts, low-rank updates, or lightweight residual modules. While effective, these methods usually treat adaptation as a discrete Euclidean perturbation of frozen representations, without explicitly modeling the geometry of the task-induced feature displacement. We propose MC-RFM, a mixed-curvature Riemannian flow-matching framework for few-shot adaptation of frozen visual backbones. The key idea is to represent adapted features on a product manifold combining a hyperbolic factor, which captures hierarchy-sensitive semantic structure, and a Euclidean factor, which preserves locally discriminative visual variation. Adaptation is formulated as a task-conditioned continuous transport from frozen features to support-set prototypes, trained with a flow-matching objective and coupled to a hybrid prototype-linear classifier. The method is lightweight, backbone-agnostic, and operates entirely on cached frozen features. Across seven visual recognition benchmarks, five frozen backbones, and 1/4/16-shot regimes, MC-RFM is the best-performing method in a majority of evaluated settings, with the strongest gains on Transformer backbones and fine-grained datasets. Ablations show that the mixed-curvature head, task conditioning, adaptive branch gating, prototype shrinkage, and discriminative supervision each contribute to performance. These results suggest that few-shot adaptation benefits not only from deciding which parameters to update, but also from modeling how representations should move through a geometry matched to the structure of the downstream task.

Data-driven surrogate models are an alternative to numerical homogenization of heterogeneous materials. In this contribution, a supervised learning approach is presented for predicting effective Lamé parameters of hyperelastic composites from low-dimensional microstructural descriptors. The data set is based on previously published numerical homogenization results for ensembles of two-phase stochastic microstructures generated by planar Boolean models, covering variations of inclusion shape, phase contrast, and area fraction; see Brändel, Brands, Maike, Rheinbach, Schröder, Schwarz and Stoyan (2022). A neural network is trained on combinations of scalar and curve-valued statistical descriptors, including the area fraction, a derived scalar shape descriptor τ, the two-point correlation function S_2(r), and the lineal-path function ell(z). Additional data representing limiting cases of the parameter space are incorporated to stabilize training and improve extrapolation behavior. The surrogate is evaluated by leave-one-grain-type-out cross-validation in order to assess generalization to unseen grain geometries. Numerical results demonstrate that additional descriptors can reduce relative errors. A predictor trained with τ and S_2(r) provides a compact representation with good quantitative accuracy and regular dense response behavior. Adding the lineal-path function ell(z) further reduces the error at the available data points, indicating that it is a promising additional descriptor; however, dense post-training response evaluations show that improved pointwise accuracy does not automatically guarantee physically admissible behavior between sampled parameter values. This motivates future work on physically constrained surrogate models, loss formulations, bounded output parametrizations, and a more systematic representation of curve-valued geometric descriptors.

Several first order stochastic optimization methods commonly used in the Euclidean domain such as stochastic gradient descent (SGD), accelerated gradient descent or variance reduced methods have already been adapted to certain Riemannian settings. However, some of the most popular of these optimization tools - namely Adam , Adagrad and the more recent Amsgrad - remain to be generalized to Riemannian manifolds. We discuss the difficulty of generalizing such adaptive schemes to the most agnostic Riemannian setting, and then provide algorithms and convergence proofs for geodesically convex objectives in the particular case of a product of Riemannian manifolds, in which adaptivity is implemented across manifolds in the cartesian product. Our generalization is tight in the sense that choosing the Euclidean space as Riemannian manifold yields the same algorithms and regret bounds as those that were already known for the standard algorithms. Experimentally, we show faster convergence and to a lower train loss value for Riemannian adaptive methods over their corresponding baselines on the realistic task of embedding the WordNet taxonomy in the Poincare ball.

Score-based generative models (SGMs) are a powerful class of generative models that exhibit remarkable empirical performance. Score-based generative modelling (SGM) consists of a ``noising'' stage, whereby a diffusion is used to gradually add Gaussian noise to data, and a generative model, which entails a ``denoising'' process defined by approximating the time-reversal of the diffusion. Existing SGMs assume that data is supported on a Euclidean space, i.e. a manifold with flat geometry. In many domains such as robotics, geoscience or protein modelling, data is often naturally described by distributions living on Riemannian manifolds and current SGM techniques are not appropriate. We introduce here Riemannian Score-based Generative Models (RSGMs), a class of generative models extending SGMs to Riemannian manifolds. We demonstrate our approach on a variety of manifolds, and in particular with earth and climate science spherical data.

Foundation models rely on large-scale web-crawled datasets, which frequently contain noisy data, biases, and irrelevant content. Existing data selection techniques typically use human heuristics, downstream evaluation datasets, or specialized scoring models, and can overlook samples' utility in the training process. Instead, we propose a new approach, Mimic Score, a data quality metric that uses a pretrained reference model as a guide to assess the usefulness of data samples for training a new model. It relies on the alignment between the gradient of the new model parameters and the vector pointing toward the reference model in weight space. Samples that misalign with this direction are considered low-value and can be filtered out. Motivated by the Mimic score, we develop Grad-Mimic, a data selection framework that identifies and prioritizes useful samples, automating the selection process to create effective filters. Empirically, using Mimic scores to guide model training results in consistent performance gains across six image datasets and enhances the performance of CLIP models. Moreover, Mimic scores and their associated filters improve upon existing filtering methods and offer accurate estimation of dataset quality.

Adversarial threats against LLMs are escalating faster than current defenses can adapt. We expose a critical geometric blind spot in alignment: adversarial prompts exploit latent camouflage, embedding perilously close to the safe representation manifold while encoding unsafe intent thereby evading surface level defenses like Direct Preference Optimization (DPO), which remain blind to the latent geometry. We introduce ALKALI, the first rigorously curated adversarial benchmark and the most comprehensive to date spanning 9,000 prompts across three macro categories, six subtypes, and fifteen attack families. Evaluation of 21 leading LLMs reveals alarmingly high Attack Success Rates (ASRs) across both open and closed source models, exposing an underlying vulnerability we term latent camouflage, a structural blind spot where adversarial completions mimic the latent geometry of safe ones. To mitigate this vulnerability, we introduce GRACE - Geometric Representation Aware Contrastive Enhancement, an alignment framework coupling preference learning with latent space regularization. GRACE enforces two constraints: latent separation between safe and adversarial completions, and adversarial cohesion among unsafe and jailbreak behaviors. These operate over layerwise pooled embeddings guided by a learned attention profile, reshaping internal geometry without modifying the base model, and achieve up to 39% ASR reduction. Moreover, we introduce AVQI, a geometry aware metric that quantifies latent alignment failure via cluster separation and compactness. AVQI reveals when unsafe completions mimic the geometry of safe ones, offering a principled lens into how models internally encode safety. We make the code publicly available at https://anonymous.4open.science/r/alkali-B416/README.md.

The Laplace-Beltrami operator (LBO) emerges from studying manifolds equipped with a Riemannian metric. It is often called the Swiss army knife of geometry processing as it allows to capture intrinsic shape information and gives rise to heat diffusion, geodesic distances, and a multitude of shape descriptors. It also plays a central role in geometric deep learning. In this work, we explore Finsler manifolds as a generalization of Riemannian manifolds. We revisit the Finsler heat equation and derive a Finsler heat kernel and a Finsler-Laplace-Beltrami Operator (FLBO): a novel theoretically justified anisotropic Laplace-Beltrami operator (ALBO). In experimental evaluations we demonstrate that the proposed FLBO is a valuable alternative to the traditional Riemannian-based LBO and ALBOs for spatial filtering and shape correspondence estimation. We hope that the proposed Finsler heat kernel and the FLBO will inspire further exploration of Finsler geometry in the computer vision community.

Model merging aims to combine multiple models into one without additional training. Naïve parameter-space averaging can be fragile under architectural symmetries, as their geometry does not take them into account. In this work we show that not only the geometry, but also the averaging procedure itself, must be symmetry-invariant to achieve symmetry-aware merges. Consequently, we propose a general solution: merging as Fréchet averaging, i.e., selecting parameters that minimize a sum of geodesic distances on an appropriate manifold. In this view, the key design choice is the overall geometry, i.e., the choice of metric, manifold, and distance approximation, that determines what it means for two models to be "close". We show that Fréchet averaging, combined with simplifying assumptions, contains Fisher merging. Building on this, we examine the particular case of low-rank adapters (LoRA), whose symmetries induce a distinct geometry: that of a quotient manifold. We outline the limitations of current LoRA merging methods, propose a practical algorithm for this setting, and show how they compare with other commonly used approaches.

CAD-to-image alignment aims to estimate an object's 9D pose (rotation, translation, and anisotropic scale) from a single RGB image, enabling applications in robotics and augmented reality. Recent zero-shot methods use visual foundation models to match image regions to CAD models, yet typically their correspondences are appearance-driven and degrade under occlusion or sim-to-real domain shift. To address these limitations, we introduce SUFLECA (Scaling Up Feature LEarning for CAD Alignment), a weakly-supervised framework for zero-shot CAD alignment with two key contributions. First, SUFLECA scales up geometry-grounded feature learning from pretrained visual representations through Normalized Object Coordinates (NOCs) supervision on 674K images spanning 12 real and synthetic datasets, learning compact geometry-aware features that generalize across domains. Second, we propose a geometrically consistent matching algorithm that establishes reliable one-to-one CAD-to-image correspondences. Together, these contributions enable accurate, sub-second alignment per object instance without iterative pose refinement. On ScanNet25k, SUFLECA achieves 33.4%/42.3% category/instance accuracy, outperforming, with a smaller computational footprint, the strongest zero-shot baseline by 10.3/12.2 percentage points and, for the first time on this benchmark, even surpassing fully supervised methods. Code is available at: https://github.com/snt-arg/SUFLECA

We present warpax, an open-source, GPU-accelerated Python toolkit for observer-robust energy-condition verification of warp drive spacetimes, together with a benchmark application to six warp-drive geometries that demonstrates the methodology and produces new quantitative findings. Existing tools evaluate energy conditions for a finite sample of observer directions. warpax replaces discrete sampling with continuous, gradient-based optimization over the full timelike observer manifold, backed by Hawking--Ellis algebraic classification. At Type~I stress-energy points, which dominate all tested metrics, an algebraic eigenvalue check determines energy-condition satisfaction exactly, independent of any observer search. At non-Type~I points, the optimizer provides rapidity-capped diagnostics. Stress-energy tensors are computed from the Arnowitt--Deser--Misner metric via forward-mode automatic differentiation, eliminating finite-difference truncation error. We apply warpax to five warp drive metrics (Alcubierre, Lentz, Van~Den~Broeck, Nat'ario, Rodal) and one warp shell metric. For several metrics, the standard Eulerian-frame analysis misses a significant fraction of violated grid points; even where it identifies the correct violation set, observer optimization reveals violation magnitudes can be orders of magnitude larger. These results demonstrate that single-frame evaluation can systematically underestimate both the spatial extent and severity of energy-condition violations. Throughout, we distinguish the invariant energy density (eigenvalue of T^a{}b) from the observer-dependent T{ab},u^a u^b and the Eulerian projection. All results use subluminal bubble velocities; at superluminal speeds, the Alcubierre-family metrics develop signature changes outside our assumptions. warpax is freely available at https://github.com/anindex/warpax

Neural scaling laws approximate a language model's loss as a power-law function of parameter count N and token count D. Following Chinchilla-style compute-optimal training, many studies fit scaling laws from runs performed under a fixed tokens-per-parameter (TPP) ratio k and set D = kN. We show that this collinear design, combined with the empirically common near-equality of the exponents governing N and D, induces an inherent ill-conditioning in the Gauss-Newton least-squares problem: the condition number of the design grows as the inverse square of the gap between the N and D-exponents. The scale coefficients become practically unidentifiable, with confidence intervals inflating by an order of magnitude or more, yielding a ``sloppy'' model whose extrapolations degrade sharply off the training ray. We prove this for four scaling-law formalisms and derive a closed-form TPP-diversity threshold that is necessary and sufficient for well-conditioned estimation. Empirically, non-collinear designs outperform collinear ones on held-out splits with a 97.3\% win rate across four laws, five corpora, multiple floating point precision modes. We further show the degeneracy is rooted in Jacobian geometry and is not an artifact of the loss function: any smooth estimation objective whose curvature involves the Jacobian inherits the same ill-conditioning.

Trajectory planning is commonly used as part of a local planner in autonomous driving. This paper considers the problem of planning a continuous-curvature-rate trajectory between fixed start and goal states that minimizes a tunable trade-off between passenger comfort and travel time. The problem is an instance of infinite dimensional optimization over two continuous functions: a path, and a velocity profile. We propose a simplification of this problem that facilitates the discretization of both functions. This paper also proposes a method to quickly generate minimal-length paths between start and goal states based on a single tuning parameter: the second derivative of curvature. Furthermore, we discretize the set of velocity profiles along a given path into a selection of acceleration way-points along the path. Gradient-descent is then employed to minimize cost over feasible choices of the second derivative of curvature, and acceleration way-points, resulting in a method that repeatedly solves the path and velocity profiles in an iterative fashion. Numerical examples are provided to illustrate the benefits of the proposed methods.

Understanding how neural networks rely on visual cues offers a human-interpretable view of their internal decision processes. The cue-conflict benchmark has been influential in probing shape-texture preference and in motivating the insight that stronger, human-like shape bias is often associated with improved in-domain performance. However, we find that the current stylization-based instantiation can yield unstable and ambiguous bias estimates. Specifically, stylization may not reliably instantiate perceptually valid and separable cues nor control their relative informativeness, ratio-based bias can obscure absolute cue sensitivity, and restricting evaluation to preselected classes can distort model predictions by ignoring the full decision space. Together, these factors can confound preference with cue validity, cue balance, and recognizability artifacts. We introduce REFINED-BIAS, an integrated dataset and evaluation framework for reliable and interpretable shape-texture bias diagnosis. REFINED-BIAS constructs balanced, human- and model- recognizable cue pairs using explicit definitions of shape and texture, and measures cue-specific sensitivity over the full label space via a ranking-based metric, enabling fairer cross-model comparisons. Across diverse training regimes and architectures, REFINED-BIAS enables fairer cross-model comparison, more faithful diagnosis of shape and texture biases, and clearer empirical conclusions, resolving inconsistencies that prior cue-conflict evaluations could not reliably disambiguate.

In this article, we develop an asymptotic method for constructing confidence regions for the set of all linear subspaces arising from PCA, from which we derive hypothesis tests on this set. Our method is based on the geometry of Riemannian manifolds with which some sets of linear subspaces are endowed.

This paper develops a hierarchical clustering algorithm for weighted projective spaces P_{q}, utilizing a Finsler metric d_F([z], [w]) and its rational analogue d_{F,Q}([z], [w]) to define distances that preserve the non-Euclidean geometry of these quotient manifolds. Defined via geodesic integrals of a scaling invariant Finsler norm weighted by the grades q = (q_0, q_1, dots, q_n), these metrics satisfy true metric properties including the triangle inequality, overcoming the limitations of the non-metric dissimilarity measure from prior work.

We revisit the geometric theory of defects. In the differential-geometric models of defects that have been adopted since the 1950s, dislocations have been associated with torsion, disclinations with the full curvature, and point defects with the first kind trace of non-metricity. The mainstream formulation exhibits several conceptual and technical shortcomings, most notably a hierarchy inconsistency, the non-exictence of a genuine metric formulation, and the potential emergence of Ostrogradsky-type instabilities. These issues have motivated us to develop a new framework, namely a generalized teleparallel geometric theory of defects. In our model, dislocations are identified with the trace of torsion, disclinations with the second kind trace of the non-metricity, and point defects with the first kind trace of the non-metricity. In addition, we retain the scalar part torsion as a free parameter for describing some possible unknown degrees of freedom in the theory of defects. The proposed geometric theory of defects is free from all of the aforementioned drawbacks and is therefore worthy of further investigation. To ensure the coherence and completeness of the discussion, we begin our analysis with elastic deformations, then summarize the existing metric-affine geometric theory of defects, and finally proceed to our original contribution, namely the new theory introduced here. We formulate the entire theory in Eulerian coordinates. Naturally, all results can be reformulated in Lagrangian coordinates as well. All analyses and formulae are expressed in the language of exterior algebra and are carried out in coordinate-independent orthonormal frames.

Model merging is an effective post-training strategy for composing capabilities in large language models without joint retraining. We study this in the supervised fine-tuning (SFT) stage, where multiple capability-based SFT checkpoints -- spanning math, code, precise instruction following, general instruction following, and knowledge recall -- must be consolidated into a single model. We introduce Optimization Trajectory Aware (OTA) Merging, a curvature-aware aggregation that leverages optimizer second-moment statistics as a diagonal curvature proxy to reweight parameter edits and mitigate interference. Complementing OTA, we propose Fast Fisher Grafting (FFG), a curvature-driven task-localization step that sparsifies conflicting or low-importance edits. FFG induces extremely low-rank masks concentrated in early attention query/key projections and token embeddings, exploiting shared curvature across capabilities. We further develop a memory-light compression of the second moments that preserves OTA's effect. Across diverse capability-based SFT checkpoints, OTA+FFG improves merged-model quality over strong weight-space baselines, reduces negative transfer, and remains robust across sparsity levels. Analyses reveal substantial curvature overlap between checkpoints, offering a novel lens on why simple linear merging can be effective in practice. Ablations confirm that FFG is critical for reducing task interference and that the compressed second moments retain the gains of the full formulation. To facilitate reproducibility, we open-source all code, training and evaluation scripts, visualization artifacts, and capability-specific SFT checkpoints at https://github.com/pmahdavi/ota-merge.

Pairwise compatibility calculation is at the core of most fragments-reconstruction algorithms, in particular those designed to solve different types of the jigsaw puzzle problem. However, most existing approaches fail, or aren't designed to deal with fragments of realistic geometric properties one encounters in real-life puzzles. And in all other cases, compatibility methods rely strongly on the restricted shapes of the fragments. In this paper, we propose an efficient hybrid (geometric and pictorial) approach for computing the optimal alignment for pairs of fragments, without any assumptions about their shapes, dimensions, or pictorial content. We introduce a new image fragments dataset generated via a novel method for image fragmentation and a formal erosion model that mimics real-world archaeological erosion, along with evaluation metrics for the compatibility task. We then embed our proposed compatibility into an archaeological puzzle-solving framework and demonstrate state-of-the-art neighborhood-level precision and recall on the RePAIR 2D dataset, directly reflecting compatibility performance improvements.

Generative priors in Image Super-Resolution (SR) often compromise faithful restoration, we attribute this limitation to a fundamental spectral misalignment between isotropic objectives and the intrinsic natural image manifold. While Direct Preference Optimization offers a path to alignment, its reliance on spectrally flat Gaussian noise fails to distinguish authentic high-frequency details from hallucinations. To bridge this geometric gap, we propose ASASR, a theoretically grounded framework that recasts the generative flow into a Sobolev-induced Riemannian geometry by explicitly coloring the noise transition kernel to mirror natural spectral decay. Driving this geometric alignment, we integrate a parametric adversary grounded in the Riesz Representation Theorem, which synthesizes targeted negative samples equivalent to worst-case Sobolev gradients to direct optimization along the tangent space of plausible structural failures. Extensive evaluations demonstrate that ASASR outperforms leading generative baselines, particularly in preserving spectral consistency and structural fidelity, offering a robust solution that effectively mitigates artifacts.

Reliable deployment of language models requires two capabilities that appear distinct but share a common geometric foundation: predicting whether a model will accept targeted behavioral control, and detecting when its internal structure degrades. We show that geometric stability, the consistency of a representation's pairwise distance structure, addresses both. Supervised Shesha variants that measure task-aligned geometric stability predict linear steerability with near-perfect accuracy (ρ= 0.89-0.97) across 35-69 embedding models and three NLP tasks, capturing unique variance beyond class separability (partial ρ= 0.62-0.76). A critical dissociation emerges: unsupervised stability fails entirely for steering on real-world tasks (ρapprox 0.10), revealing that task alignment is essential for controllability prediction. However, unsupervised stability excels at drift detection, measuring nearly 2times greater geometric change than CKA during post-training alignment (up to 5.23times in Llama) while providing earlier warning in 73\% of models and maintaining a 6times lower false alarm rate than Procrustes. Together, supervised and unsupervised stability form complementary diagnostics for the LLM deployment lifecycle: one for pre-deployment controllability assessment, the other for post-deployment monitoring.

In this paper, we establish effective equidistribution of transverse intersection points between properly immersed totally geodesic submanifolds of complementary dimensions in a finite-volume hyperbolic manifold with respect to the hyperbolic volume measure, as the volume of the submanifolds tends to infinity.

One-class learning is the classic problem of fitting a model to data for which annotations are available only for a single class. In this paper, we propose a novel objective for one-class learning. Our key idea is to use a pair of orthonormal frames -- as subspaces -- to "sandwich" the labeled data via optimizing for two objectives jointly: i) minimize the distance between the origins of the two subspaces, and ii) to maximize the margin between the hyperplanes and the data, either subspace demanding the data to be in its positive and negative orthant respectively. Our proposed objective however leads to a non-convex optimization problem, to which we resort to Riemannian optimization schemes and derive an efficient conjugate gradient scheme on the Stiefel manifold. To study the effectiveness of our scheme, we propose a new dataset~Dash-Cam-Pose, consisting of clips with skeleton poses of humans seated in a car, the task being to classify the clips as normal or abnormal; the latter is when any human pose is out-of-position with regard to say an airbag deployment. Our experiments on the proposed Dash-Cam-Pose dataset, as well as several other standard anomaly/novelty detection benchmarks demonstrate the benefits of our scheme, achieving state-of-the-art one-class accuracy.

Smoothness is crucial for attaining fast rates in first-order optimization. However, many optimization problems in modern machine learning involve non-smooth objectives. Recent studies relax the smoothness assumption by allowing the Lipschitz constant of the gradient to grow with respect to the gradient norm, which accommodates a broad range of objectives in practice. Despite this progress, existing generalizations of smoothness are restricted to Euclidean geometry with ell_2-norm and only have theoretical guarantees for optimization in the Euclidean space. In this paper, we address this limitation by introducing a new ell*-smoothness concept that measures the norm of Hessians in terms of a general norm and its dual, and establish convergence for mirror-descent-type algorithms, matching the rates under the classic smoothness. Notably, we propose a generalized self-bounding property that facilitates bounding the gradients via controlling suboptimality gaps, serving as a principal component for convergence analysis. Beyond deterministic optimization, we establish sharp convergence for stochastic mirror descent, matching state-of-the-art under classic smoothness. Our theory also extends to non-convex and composite optimization, which may shed light on practical usages of mirror descent, including pre-training and post-training of LLMs.

The manifold hypothesis, which assumes that data lies on or close to an unknown manifold of low intrinsic dimension, is a staple of modern machine learning research. However, recent work has shown that real-world data exhibits distinct non-manifold structures, i.e. singularities, that can lead to erroneous findings. Detecting such singularities is therefore crucial as a precursor to interpolation and inference tasks. We address this issue by developing a topological framework that (i) quantifies the local intrinsic dimension, and (ii) yields a Euclidicity score for assessing the 'manifoldness' of a point along multiple scales. Our approach identifies singularities of complex spaces, while also capturing singular structures and local geometric complexity in image data.

In this paper we demonstrate how sub-Riemannian geometry can be used for manifold learning and surface reconstruction by combining local linear approximations of a point cloud to obtain lower dimensional bundles. Local approximations obtained by local PCAs are collected into a rank k tangent subbundle on R^d, k<d, which we call a principal subbundle. This determines a sub-Riemannian metric on R^d. We show that sub-Riemannian geodesics with respect to this metric can successfully be applied to a number of important problems, such as: explicit construction of an approximating submanifold M, construction of a representation of the point-cloud in R^k, and computation of distances between observations, taking the learned geometry into account. The reconstruction is guaranteed to equal the true submanifold in the limit case where tangent spaces are estimated exactly. Via simulations, we show that the framework is robust when applied to noisy data. Furthermore, the framework generalizes to observations on an a priori known Riemannian manifold.

This paper presents a Surface-Aligned Gaussian representation for creating animatable human avatars from monocular videos,aiming at improving the novel view and pose synthesis performance while ensuring fast training and real-time rendering. Recently,3DGS has emerged as a more efficient and expressive alternative to NeRF, and has been used for creating dynamic human avatars. However,when applied to the severely ill-posed task of monocular dynamic reconstruction, the Gaussians tend to overfit the constantly changing regions such as clothes wrinkles or shadows since these regions cannot provide consistent supervision, resulting in noisy geometry and abrupt deformation that typically fail to generalize under novel views and poses.To address these limitations, we present SAGA,i.e.,Surface-Aligned Gaussian Avatar,which aligns the Gaussians with a mesh to enforce well-defined geometry and consistent deformation, thereby improving generalization under novel views and poses. Unlike existing strict alignment methods that suffer from limited expressive power and low realism,SAGA employs a two-stage alignment strategy where the Gaussians are first adhered on while then detached from the mesh, thus facilitating both good geometry and high expressivity. In the Adhered Stage, we improve the flexibility of Adhered-on-Mesh Gaussians by allowing them to flow on the mesh, in contrast to existing methods that rigidly bind Gaussians to fixed location. In the second Detached Stage, we introduce a Gaussian-Mesh Alignment regularization, which allows us to unleash the expressivity by detaching the Gaussians but maintain the geometric alignment by minimizing their location and orientation offsets from the bound triangles. Finally, since the Gaussians may drift outside the bound triangles during optimization, an efficient Walking-on-Mesh strategy is proposed to dynamically update the bound triangles.

Current LLM alignment techniques use pairwise human preferences at a sample level, and as such, they do not imply an alignment on the distributional level. We propose in this paper Alignment via Optimal Transport (AOT), a novel method for distributional preference alignment of LLMs. AOT aligns LLMs on unpaired preference data by making the reward distribution of the positive samples stochastically dominant in the first order on the distribution of negative samples. We introduce a convex relaxation of this first-order stochastic dominance and cast it as an optimal transport problem with a smooth and convex cost. Thanks to the one-dimensional nature of the resulting optimal transport problem and the convexity of the cost, it has a closed-form solution via sorting on empirical measures. We fine-tune LLMs with this AOT objective, which enables alignment by penalizing the violation of the stochastic dominance of the reward distribution of the positive samples on the reward distribution of the negative samples. We analyze the sample complexity of AOT by considering the dual of the OT problem and show that it converges at the parametric rate. Empirically, we show on a diverse set of alignment datasets and LLMs that AOT leads to state-of-the-art models in the 7B family of models when evaluated with Open LLM Benchmarks and AlpacaEval.

Structural and Positional Encodings can significantly improve the performance of Graph Neural Networks in downstream tasks. Recent literature has begun to systematically investigate differences in the structural properties that these approaches encode, as well as performance trade-offs between them. However, the question of which structural properties yield the most effective encoding remains open. In this paper, we investigate this question from a geometric perspective. We propose a novel structural encoding based on discrete Ricci curvature (Local Curvature Profiles, short LCP) and show that it significantly outperforms existing encoding approaches. We further show that combining local structural encodings, such as LCP, with global positional encodings improves downstream performance, suggesting that they capture complementary geometric information. Finally, we compare different encoding types with (curvature-based) rewiring techniques. Rewiring has recently received a surge of interest due to its ability to improve the performance of Graph Neural Networks by mitigating over-smoothing and over-squashing effects. Our results suggest that utilizing curvature information for structural encodings delivers significantly larger performance increases than rewiring.

We prove a new existence theorem for proper solutions of Huisken and Ilmanen's weak inverse mean curvature flow, assuming certain non-degeneracy conditions on the isoperimetric profile. In particular, no curvature assumption is imposed in our existence theorem.

Uniformity plays a crucial role in the assessment of learned representations, contributing to a deeper comprehension of self-supervised learning. The seminal work by Wang2020UnderstandingCR introduced a uniformity metric that quantitatively measures the collapse degree of learned representations. Directly optimizing this metric together with alignment proves to be effective in preventing constant collapse. However, we present both theoretical and empirical evidence revealing that this metric lacks sensitivity to dimensional collapse, highlighting its limitations. To address this limitation and design a more effective uniformity metric, this paper identifies five fundamental properties, some of which the existing uniformity metric fails to meet. We subsequently introduce a novel uniformity metric that satisfies all of these desiderata and exhibits sensitivity to dimensional collapse. When applied as an auxiliary loss in various established self-supervised methods, our proposed uniformity metric consistently enhances their performance in downstream tasks.Our code was released at https://github.com/sunset-clouds/WassersteinUniformityMetric.

One-stage object detection is commonly implemented by optimizing two sub-tasks: object classification and localization, using heads with two parallel branches, which might lead to a certain level of spatial misalignment in predictions between the two tasks. In this work, we propose a Task-aligned One-stage Object Detection (TOOD) that explicitly aligns the two tasks in a learning-based manner. First, we design a novel Task-aligned Head (T-Head) which offers a better balance between learning task-interactive and task-specific features, as well as a greater flexibility to learn the alignment via a task-aligned predictor. Second, we propose Task Alignment Learning (TAL) to explicitly pull closer (or even unify) the optimal anchors for the two tasks during training via a designed sample assignment scheme and a task-aligned loss. Extensive experiments are conducted on MS-COCO, where TOOD achieves a 51.1 AP at single-model single-scale testing. This surpasses the recent one-stage detectors by a large margin, such as ATSS (47.7 AP), GFL (48.2 AP), and PAA (49.0 AP), with fewer parameters and FLOPs. Qualitative results also demonstrate the effectiveness of TOOD for better aligning the tasks of object classification and localization. Code is available at https://github.com/fcjian/TOOD.