Daily Papers

Accurate estimates of Above Ground Biomass (AGB) are essential in addressing two of humanity's biggest challenges, climate change and biodiversity loss. Existing datasets for AGB estimation from satellite imagery are limited. Either they focus on specific, local regions at high resolution, or they offer global coverage at low resolution. There is a need for a machine learning-ready, globally representative, high-resolution benchmark. Our findings indicate significant variability in biomass estimates across different vegetation types, emphasizing the necessity for a dataset that accurately captures global diversity. To address these gaps, we introduce a comprehensive new dataset that is globally distributed, covers a range of vegetation types, and spans several years. This dataset combines AGB reference data from the GEDI mission with data from Sentinel-2 and PALSAR-2 imagery. Additionally, it includes pre-processed high-level features such as a dense canopy height map, an elevation map, and a land-cover classification map. We also produce a dense, high-resolution (10m) map of AGB predictions for the entire area covered by the dataset. Rigorously tested, our dataset is accompanied by several benchmark models and is publicly available. It can be easily accessed using a single line of code, offering a solid basis for efforts towards global AGB estimation. The GitHub repository github.com/ghjuliasialelli/AGBD serves as a one-stop shop for all code and data.

Global vegetation structure mapping is critical for understanding the global carbon cycle and maximizing the efficacy of nature-based carbon sequestration initiatives. Moreover, vegetation structure mapping can help reduce the impacts of climate change by, for example, guiding actions to improve water security, increase biodiversity and reduce flood risk. Global satellite measurements provide an important set of observations for monitoring and managing deforestation and degradation of existing forests, natural forest regeneration, reforestation, biodiversity restoration, and the implementation of sustainable agricultural practices. In this paper, we explore the effectiveness of fine-tuning of a geospatial foundation model to estimate above-ground biomass (AGB) using space-borne data collected across different eco-regions in Brazil. The fine-tuned model architecture consisted of a Swin-B transformer as the encoder (i.e., backbone) and a single convolutional layer for the decoder head. All results were compared to a U-Net which was trained as the baseline model Experimental results of this sparse-label prediction task demonstrate that the fine-tuned geospatial foundation model with a frozen encoder has comparable performance to a U-Net trained from scratch. This is despite the fine-tuned model having 13 times less parameters requiring optimization, which saves both time and compute resources. Further, we explore the transfer-learning capabilities of the geospatial foundation models by fine-tuning on satellite imagery with sparse labels from different eco-regions in Brazil.

Agricultural residues represent a vast, underutilized resource for renewable energy. This study combines empirical analysis from 179 countries with a case study of a pelletization facility to evaluate the global potential of agricultural pelletization for fossil fuel replacement. The findings estimate a technical availability of 1.44 billion tons of crop residues suitable for pellet production, translating to a 4.5% potential displacement of global fossil fuel energy use, equating to 22 million TJ and equivalent to 917 million tons of coal annually. The economically optimized scenario projects annual savings of $163 billion and a reduction of 1.35 billion tons of CO2 equivalent in emissions. Utilizing the custom-developed CLASP-P and RECOP models, the study further demonstrates that agricultural pellets can achieve competitive pricing against conventional fossil fuels in many markets. Despite logistical and policy challenges, agricultural pelletization emerges as a scalable, market-driven pathway to support global decarbonization goals while fostering rural economic development. These results reinforce the need for targeted investment, technological advancement, and supportive policy to unlock the full potential of agricultural pellets in the renewable energy mix.

Crop biomass, a critical indicator of plant growth, health, and productivity, is invaluable for crop breeding programs and agronomic research. However, the accurate and scalable quantification of crop biomass remains inaccessible due to limitations in existing measurement methods. One of the obstacles impeding the advancement of current crop biomass prediction methodologies is the scarcity of publicly available datasets. Addressing this gap, we introduce a new dataset in this domain, i.e. Multi-modality dataset for crop biomass estimation (MMCBE). Comprising 216 sets of multi-view drone images, coupled with LiDAR point clouds, and hand-labelled ground truth, MMCBE represents the first multi-modality one in the field. This dataset aims to establish benchmark methods for crop biomass quantification and foster the development of vision-based approaches. We have rigorously evaluated state-of-the-art crop biomass estimation methods using MMCBE and ventured into additional potential applications, such as 3D crop reconstruction from drone imagery and novel-view rendering. With this publication, we are making our comprehensive dataset available to the broader community.

Accurate estimation of forest biomass, a major carbon sink, relies heavily on tree-level traits such as height and species. Unoccupied Aerial Vehicles (UAVs) capturing high-resolution imagery from a single RGB camera offer a cost-effective and scalable approach for mapping and measuring individual trees. We introduce BIRCH-Trees, the first benchmark for individual tree height and species estimation from tree-centered UAV images, spanning three datasets: temperate forests, tropical forests, and boreal plantations. We also present DINOvTree, a unified approach using a Vision Foundation Model (VFM) backbone with task-specific heads for simultaneous height and species prediction. Through extensive evaluations on BIRCH-Trees, we compare DINOvTree against commonly used vision methods, including VFMs, as well as biological allometric equations. We find that DINOvTree achieves top overall results with accurate height predictions and competitive classification accuracy while using only 54% to 58% of the parameters of the second-best approach.

Accurate estimation of pasture biomass is important for decision-making in livestock production systems. Estimates of pasture biomass can be used to manage stocking rates to maximise pasture utilisation, while minimising the risk of overgrazing and promoting overall system health. We present a comprehensive dataset of 1,162 annotated top-view images of pastures collected across 19 locations in Australia. The images were taken across multiple seasons and include a range of temperate pasture species. Each image captures a 70cm * 30cm quadrat and is paired with on-ground measurements including biomass sorted by component (green, dead, and legume fraction), vegetation height, and Normalized Difference Vegetation Index (NDVI) from Active Optical Sensors (AOS). The multidimensional nature of the data, which combines visual, spectral, and structural information, opens up new possibilities for advancing the use of precision grazing management. The dataset is released and hosted in a Kaggle competition that challenges the international Machine Learning community with the task of pasture biomass estimation. The dataset is available on the official Kaggle webpage: https://www.kaggle.com/competitions/csiro-biomass

The increasing demand for commodities is leading to changes in land use worldwide. In the tropics, deforestation, which causes high carbon emissions and threatens biodiversity, is often linked to agricultural expansion. While the need for deforestation-free global supply chains is widely recognized, making progress in practice remains a challenge. Here, we propose an automated approach that aims to support conservation and sustainable land use planning decisions by mapping tropical landscapes at large scale and high spatial resolution following the High Carbon Stock (HCS) approach. A deep learning approach is developed that estimates canopy height for each 10 m Sentinel-2 pixel by learning from sparse GEDI LIDAR reference data, achieving an overall RMSE of 6.3 m. We show that these wall-to-wall maps of canopy top height are predictive for classifying HCS forests and degraded areas with an overall accuracy of 86 % and produce a first high carbon stock map for Indonesia, Malaysia, and the Philippines.

This study investigates the relationship between sugarcane yield and cane height derived under different water and nitrogen conditions from pre-harvest Digital Surface Model (DSM) obtained via Unmanned Aerial Vehicle (UAV) flights over a sugarcane test farm. The farm was divided into 62 blocks based on three water levels (low, medium, and high) and three nitrogen levels (low, medium, and high), with repeated treatments. In pixel distribution of DSM for each block, it provided bimodal distribution representing two peaks, ground level (gaps within canopies) and top of the canopies respectively. Using bimodal distribution, mean cane height was extracted for each block by applying a trimmed mean to the pixel distribution, focusing on the top canopy points. Similarly, the extracted mean elevation of the base was derived from the bottom points, representing ground level. The Derived Cane Height Model (DCHM) was generated by taking the difference between the mean canopy height and mean base elevation for each block. Yield measurements (tons/acre) were recorded post-harvest for each block. By aggregating the data into nine treatment zones (e.g., high water-low nitrogen, low water-high nitrogen), the DCHM and median yield were calculated for each zone. The regression analysis between the DCHM and corresponding yields for the different treatment zones yielded an R 2 of 0.95. This study demonstrates the significant impact of water and nitrogen treatments on sugarcane height and yield, utilizing one-time UAV-derived DSM data.

Pyrolysis techniques have served to be a groundbreaking technique for effectively utilising natural and man-made biomass products like plastics, wood, crop residue, fruit peels etc. Recent advancements have shown a greater yield of essential products like biochar, bio-oil and other non-condensable gases by blending different biomasses in a certain ratio. This synergy effect of combining two pyrolytic raw materials i.e co-pyrolysis of algae and wood biomass has been systematically studied and grouped into 3 phases in this research paper-kinetic analysis of co-pyrolysis, correlation among proximate and ultimate analysis with bio-char yield and lastly grouping of different weight ratios based on biochar yield up to a certain percentage. Different ML and DL algorithms have been utilized for regression and classification techniques to give a comprehensive overview of the effect of the synergy of two different biomass materials on biochar yield. For the first phase, the best prediction of biochar yield was obtained by using a decision tree regressor with a perfect MSE score of 0.00, followed by a gradient-boosting regressor. The second phase was analyzed using both ML and DL techniques. Within ML, SVR proved to be the most convenient model with an accuracy score of 0.972 with DNN employed for deep learning technique. Finally, for the third phase, binary classification was applied to biochar yield with and without heating rate for biochar yield percentage above and below 40%. The best technique for ML was Support Vector followed by Random forest while ANN was the most suitable Deep Learning Technique.

Estimating canopy height and canopy height change at meter resolution from satellite imagery has numerous applications, such as monitoring forest health, logging activities, wood resources, and carbon stocks. However, many existing forest datasets are based on commercial or closed data sources, restricting the reproducibility and evaluation of new approaches. To address this gap, we introduce Open-Canopy, the first open-access and country-scale benchmark for very high resolution (1.5 m) canopy height estimation. Covering more than 87,000 km^2 across France, Open-Canopy combines SPOT satellite imagery with high resolution aerial LiDAR data. We also propose Open-Canopy-Delta, the first benchmark for canopy height change detection between two images taken at different years, a particularly challenging task even for recent models. To establish a robust foundation for these benchmarks, we evaluate a comprehensive list of state-of-the-art computer vision models for canopy height estimation. The dataset and associated codes can be accessed at https://github.com/fajwel/Open-Canopy.

Accurate estimation of pasture biomass from agricultural imagery is critical for sustainable livestock management, yet existing methods are limited by the small, imbalanced, and sparsely annotated datasets typical of real world monitoring. In this study, adaptation of vision foundation models to agricultural regression is systematically evaluated on the CSIRO Pasture Biomass benchmark, a 357 image dual view dataset with laboratory validated, component wise ground truth for five biomass targets, through 17 configurations spanning four backbones (EfficientNet-B3 to DINOv3-ViT-L), five cross view fusion mechanisms, and a 4x2 metadata factorial. A counterintuitive principle, termed "fusion complexity inversion", is uncovered: on scarce agricultural data, a two layer gated depthwise convolution (R^2 = 0.903) outperforms cross view attention transformers (0.833), bidirectional SSMs (0.819), and full Mamba (0.793, below the no fusion baseline). Backbone pretraining scale is found to monotonically dominate all architectural choices, with the DINOv2 -> DINOv3 upgrade alone yielding +5.0 R^2 points. Training only metadata (species, state, and NDVI) is shown to create a universal ceiling at R^2 ~ 0.829, collapsing an 8.4 point fusion spread to 0.1 points. Actionable guidelines for sparse agricultural benchmarks are established: backbone quality should be prioritized over fusion complexity, local modules preferred over global alternatives, and features unavailable at inference excluded.

We propose a novel hybrid cable-based robot with manipulator and camera for high-accuracy, medium-throughput plant monitoring in a vertical hydroponic farm and, as an example application, demonstrate non-destructive plant mass estimation. Plant monitoring with high temporal and spatial resolution is important to both farmers and researchers to detect anomalies and develop predictive models for plant growth. The availability of high-quality, off-the-shelf structure-from-motion (SfM) and photogrammetry packages has enabled a vibrant community of roboticists to apply computer vision for non-destructive plant monitoring. While existing approaches tend to focus on either high-throughput (e.g. satellite, unmanned aerial vehicle (UAV), vehicle-mounted, conveyor-belt imagery) or high-accuracy/robustness to occlusions (e.g. turn-table scanner or robot arm), we propose a middle-ground that achieves high accuracy with a medium-throughput, highly automated robot. Our design pairs the workspace scalability of a cable-driven parallel robot (CDPR) with the dexterity of a 4 degree-of-freedom (DoF) robot arm to autonomously image many plants from a variety of viewpoints. We describe our robot design and demonstrate it experimentally by collecting daily photographs of 54 plants from 64 viewpoints each. We show that our approach can produce scientifically useful measurements, operate fully autonomously after initial calibration, and produce better reconstructions and plant property estimates than those of over-canopy methods (e.g. UAV). As example applications, we show that our system can successfully estimate plant mass with a Mean Absolute Error (MAE) of 0.586g and, when used to perform hypothesis testing on the relationship between mass and age, produces p-values comparable to ground-truth data (p=0.0020 and p=0.0016, respectively).

Detailed forest inventories are critical for sustainable and flexible management of forest resources, to conserve various ecosystem services. Modern airborne laser scanners deliver high-density point clouds with great potential for fine-scale forest inventory and analysis, but automatically partitioning those point clouds into meaningful entities like individual trees or tree components remains a challenge. The present study aims to fill this gap and introduces a deep learning framework, termed ForAINet, that is able to perform such a segmentation across diverse forest types and geographic regions. From the segmented data, we then derive relevant biophysical parameters of individual trees as well as stands. The system has been tested on FOR-Instance, a dataset of point clouds that have been acquired in five different countries using surveying drones. The segmentation back-end achieves over 85% F-score for individual trees, respectively over 73% mean IoU across five semantic categories: ground, low vegetation, stems, live branches and dead branches. Building on the segmentation results our pipeline then densely calculates biophysical features of each individual tree (height, crown diameter, crown volume, DBH, and location) and properties per stand (digital terrain model and stand density). Especially crown-related features are in most cases retrieved with high accuracy, whereas the estimates for DBH and location are less reliable, due to the airborne scanning setup.

Sustainable Aviation Fuels (SAF) are pivotal in the global effort to decarbonize the aviation sector and meet greenhouse gas (GHG) reduction targets established by international frameworks such as CORSIA and Brazil ProBioQAV. This study evaluates SAF potential to reduce lifecycle carbon emissions by up to 80% while being compatible with existing aviation infrastructure. Through bibliometric analysis, scenario evaluation, legal and regulatory framework analysis and economic modeling, the research examines two key SAF production technologies: Hydroprocessed Esters and Fatty Acids Synthetic Paraffinic Kerosene (HEFA-SPK) and Alcohol-to-Jet (ATJ) pathways in the Brazilian context. The findings reveal significant economic challenges, particularly high feedstock and production costs, which hinder SAF competitiveness with fossil fuels at recent and current market prices in Brazil, leading to the analysis of potential incentives and commercial conditions aiming to increase economic attractiveness of SAF production. Based on interviews with relevant stakeholders and decision makers in the industry, scenarios incorporating tax incentives, carbon credits, capital grants, and premium pricing for SAF and its biogenic by-products demonstrate that combined policy interventions and commercial arrangements, along with a regulated Carbon Market are essential for SAF economic viability. Future research is suggested to look at regional assessments of feedstock availability, supply chain logistics, and global market eligibility. This research provides insights for guiding public policy and private investment to support the transition to sustainable aviation in Brazil and beyond.

Canada experienced in 2023 one of the most severe wildfire seasons in recent history, causing damage across ecosystems, destroying communities, and emitting large quantities of CO2. This extreme wildfire season is symptomatic of a climate-change-induced increase in the length and severity of the fire season that affects the boreal ecosystem. Therefore, it is critical to empower wildfire management in boreal communities with better mitigation solutions. Wildfire probability maps represent an important tool for understanding the likelihood of wildfire occurrence and the potential severity of future wildfires. The massive increase in the availability of Earth observation data has enabled the development of deep learning-based wildfire forecasting models, aiming at providing precise wildfire probability maps at different spatial and temporal scales. A main limitation of such methods is their reliance on coarse-resolution environmental drivers and satellite products, leading to wildfire occurrence prediction of reduced resolution, typically around sim 0.1{\deg}. This paper presents a benchmark dataset: CanadaFireSat, and baseline methods for high-resolution: 100 m wildfire forecasting across Canada, leveraging multi-modal data from high-resolution multi-spectral satellite images (Sentinel-2 L1C), mid-resolution satellite products (MODIS), and environmental factors (ERA5 reanalysis data). Our experiments consider two major deep learning architectures. We observe that using multi-modal temporal inputs outperforms single-modal temporal inputs across all metrics, achieving a peak performance of 60.3% in F1 score for the 2023 wildfire season, a season never seen during model training. This demonstrates the potential of multi-modal deep learning models for wildfire forecasting at high-resolution and continental scale.

The production of food, feed, fiber, and fuel is a key task of agriculture, which has to cope with many challenges in the upcoming decades, e.g., a higher demand, climate change, lack of workers, and the availability of arable land. Vision systems can support making better and more sustainable field management decisions, but also support the breeding of new crop varieties by allowing temporally dense and reproducible measurements. Recently, agricultural robotics got an increasing interest in the vision and robotics communities since it is a promising avenue for coping with the aforementioned lack of workers and enabling more sustainable production. While large datasets and benchmarks in other domains are readily available and enable significant progress, agricultural datasets and benchmarks are comparably rare. We present an annotated dataset and benchmarks for the semantic interpretation of real agricultural fields. Our dataset recorded with a UAV provides high-quality, pixel-wise annotations of crops and weeds, but also crop leaf instances at the same time. Furthermore, we provide benchmarks for various tasks on a hidden test set comprised of different fields: known fields covered by the training data and a completely unseen field. Our dataset, benchmarks, and code are available at https://www.phenobench.org.