Daily Papers

Forecasting the future anatomy of slow-evolving neurodegenerative diseases could enable earlier, more targeted intervention and improve clinical trial design, but it remains challenging because true progression signals are subtle in longitudinal MRI. In this low-signal regime, transferring modern generative sequence models directly is unreliable: training is dominated by stable baseline anatomy and confounded by dense, sample-specific nuisance variation. We first provide a theoretical analysis that explains these failures through two modes. Identity collapse occurs when optimization is driven toward reproducing the current anatomy, which prevents the model from learning faint temporal change. The continuous interpolation trap arises when standard smooth networks cannot separate localized biological drift from pervasive noise, which leads to spurious changes that diffuse across the volume. To address both issues, we propose Latent Drift, a progressive generative framework that learns change in a compressed semantic representation rather than synthesizing full-resolution anatomy. This design removes pixel-level identity from the prediction target and concentrates model capacity on progression-relevant dynamics. We further apply Finite Scalar Quantization to the learned change representation, which suppresses small, high-frequency nuisance fluctuations while preserving consistent structural drift. Experiments on longitudinal 3D brain MRI show that Latent Drift improves patient-specific neuro-forecasting over diffusion and autoregressive transformer baselines across generative fidelity and clinically relevant evaluation metrics. Project page: https://cutepkq.github.io/latent-drift{https://cutepkq.github.io/latent-drift}.

Sequential recommendation increasingly employs latent multi-step reasoning to enhance test-time computation. Despite empirical gains, existing approaches largely drive intermediate reasoning states via target-dominant objectives without imposing explicit feasibility constraints. This results in latent drift, where reasoning trajectories deviate into implausible regions. We argue that effective recommendation reasoning should instead be viewed as navigation on a collaborative manifold rather than free-form latent refinement. To this end, we propose ManCAR (Manifold-Constrained Adaptive Reasoning), a principled framework that grounds reasoning within the topology of a global interaction graph. ManCAR constructs a local intent prior from the collaborative neighborhood of a user's recent actions, represented as a distribution over the item simplex. During training, the model progressively aligns its latent predictive distribution with this prior, forcing the reasoning trajectory to remain within the valid manifold. At test time, reasoning proceeds adaptively until the predictive distribution stabilizes, avoiding over-refinement. We provide a variational interpretation of ManCAR to theoretically validate its drift-prevention and adaptive test-time stopping mechanisms. Experiments on seven benchmarks demonstrate that ManCAR consistently outperforms state-of-the-art baselines, achieving up to a 46.88% relative improvement w.r.t. NDCG@10. Our code is available at https://github.com/FuCongResearchSquad/ManCAR.

Single-shot neural decoders commit to answers without iterative refinement, while chain-of-thought methods introduce discrete intermediate steps but lack a scalar measure of reasoning progress. We propose Energy-Based Reasoning via Structured Latent Planning (EBRM), which models reasoning as gradient-based optimization of a multi-step latent trajectory z_{1:T} under a learned energy function E(h_x, z). The energy decomposes into per-step compatibility, transition consistency, and trajectory smoothness terms. Training combines supervised encoder-decoder learning with contrastive energy shaping using hard negatives, while inference performs gradient descent or Langevin dynamics over z and decodes from z_T. We identify a critical failure mode: on CNF logic satisfaction, latent planning reduces accuracy from approx 95% to approx 56%. This degradation arises from a distribution mismatch, where the decoder is trained on encoder outputs h_x but evaluated on planner outputs z_T that drift into unseen latent regions. We analyze this behavior through per-step decoding, latent drift tracking, and gradient decomposition. To address it, we propose dual-path decoder training and latent anchoring. We further introduce a six-part ablation protocol covering component contributions, trajectory length, planner dynamics, initialization, decoder training distribution, and anchor weight. Experiments on three synthetic tasks show that energy decreases monotonically and induces structured latent trajectories on graph and logic tasks, while remaining flat on arithmetic (r = 0.073), indicating a negative result. Code is available at https://github.com/dkjo8/ebr-via-structured-latent-planning.

Diffusion Transformers (DiT) have emerged as a widely adopted backbone for high-fidelity image and video generation, yet their iterative denoising process incurs high computational costs. Existing training-free acceleration methods rely on feature caching and reuse under the assumption of temporal stability. However, reusing features for multiple steps may lead to latent drift and visual degradation. We observe that model outputs evolve smoothly along much of the diffusion trajectory, enabling principled predictions rather than naive reuse. Based on this insight, we propose PrediT, a training-free acceleration framework that formulates feature prediction as a linear multistep problem. We employ classical linear multistep methods to forecast future model outputs from historical information, combined with a corrector that activates in high-dynamics regions to prevent error accumulation. A dynamic step modulation mechanism adaptively adjusts the prediction horizon by monitoring the feature change rate. Together, these components enable substantial acceleration while preserving generation fidelity. Extensive experiments validate that our method achieves up to 5.54times latency reduction across various DiT-based image and video generation models, while incurring negligible quality degradation.

Multimodal Large Language Models (MLLMs) have made remarkable progress on vision-language reasoning, yet most methods still compress visual evidence into discrete textual thoughts, creating an information bottleneck for fine-grained perception. Recent latent visual reasoning methods attempt to reason in continuous hidden states, but we find that they suffer from insufficient manifold compatibility: latent trajectories drift away from pretrained reasoning circuits, collapse into instance-agnostic patterns, and are often bypassed during answer generation. To address these issues, we propose RIS (Retrieve, Integrate, and Synthesize), a spatial-semantic grounded framework that develops latent reasoning as a compatible extension of pretrained MLLM computation. We first construct a step-wise grounded reasoning dataset with bounding boxes and region-specific semantic descriptions. Built on this supervision, RIS anchors latent tokens to both spatial and semantic evidence, enforces their causal role through a progressive attention bottleneck, and introduces short language transition tokens to bridge synthesized latent states back to vocabulary-aligned decoding. Experiments on V*, HRBench4K, HRBench8K, MMVP, and BLINK show consistent improvements over closed/open-source and latent reasoning baselines. Further analyses demonstrate that RIS learns diverse, interpretable, and progressively integrated latent trajectories, offering a practical path toward faithful internal visual reasoning in MLLMs.

Model-based reinforcement learning (MBRL) improves sample efficiency by optimizing policies inside imagined rollouts, but long-horizon planning degrades when model errors compound and imagined trajectories drift off the training manifold. We introduce GIRL (Generative Imagination Reinforcement Learning), a latent world-model framework that addresses this failure mode with two key components. First, a cross-modal grounding signal derived from a frozen foundation model (DINOv2) anchors the latent transition prior to a semantically consistent embedding space, penalizing inconsistent or implausible predictions. Second, an uncertainty-adaptive trust-region bottleneck interprets the KL regularizer as the Lagrange multiplier of a constrained optimization problem, restricting imagination drift within a learned region calibrated by Expected Information Gain and a Relative Performance Loss signal. We re-derive a value-gap bound using the Performance Difference Lemma and Integral Probability Metrics, yielding a bound that remains informative as the discount factor approaches one and connects the objective to real-environment regret. Experiments across three benchmark suites, including DeepMind Control, Adroit Hand Manipulation, and Meta-World with visual distractors, show that GIRL reduces latent rollout drift by 38 to 61 percent across tasks relative to DreamerV3, improves asymptotic return, and requires fewer environment interactions on long-horizon tasks. GIRL also outperforms TD-MPC2 on sparse-reward and high-contact settings under standard evaluation metrics. A distilled-prior variant reduces inference overhead and improves computational efficiency relative to the full model.

Representation Autoencoders (RAEs) have improved diffusion and flow models by semantically richer latent space owing to the strongly label-wise clustered DINO features in the pretrained encoders. Yet in the distillation stage, the severe anisotropy and large curvatures caused by the rich semantic representations would hinder the convergence and performance, making the trajectory-based distillation unstable. In this work, we argue that the RAE latent space is compatible with distillation via the newly proposed Drifting Models. We first quantitatively study the curvatures and isotropy statistics across different autoencoders, and theoretically reveal that Drifting Model itself is highly likely to fail on extremely scattered spaces like reconstruction-based VAEs. These motivate us to apply the drifting paradigm directly to representation autoencoders. Our proposed method, Drift-RAE, distills pretrained flow models in RAE latent spaces using Drifting, together with insightful modifications that improve training stability by thereotically aligning drifting fields with other frameworks. Regarding the experimental evidences, we achieve 1.77 FID on ImageNet 256 dataset using only 10k distillation steps, surpassing state-of-the-art RAE distillation methods and appearing comparative with the original Drifting Model without requiring an auxiliary MAE feature extractor. The code will be made publicly available.

Auto-regressive video generation enables long video synthesis by iteratively conditioning each new batch of frames on previously generated content. However, recent work has shown that such pipelines suffer from severe temporal drift, where errors accumulate and amplify over long horizons. We hypothesize that this drift does not primarily stem from insufficient model capacity, but rather from inference-time error propagation. Specifically, we contend that drift arises from the uncontrolled reuse of corrupted latent conditioning tokens during auto-regressive inference. To correct this accumulation of errors, we propose a simple, inference-time method that mitigates temporal drift by identifying and removing unstable latent tokens before they are reused for conditioning. For this purpose, we define unstable tokens as latent tokens whose representations deviate significantly from those of the previously generated batch, indicating potential corruption or semantic drift. By explicitly removing corrupted latent tokens from the auto-regressive context, rather than modifying entire spatial regions or model parameters, our method prevents unreliable latent information from influencing future generation steps. As a result, it significantly improves long-horizon temporal consistency without modifying the model architecture, training procedure, or leaving latent space.

Reduced-order modeling (ROM) of time-dependent and parameterized differential equations aims to accelerate the simulation of complex high-dimensional systems by learning a compact latent manifold representation that captures the characteristics of the solution fields and their time-dependent dynamics. Although high-fidelity numerical solvers generate the training datasets, they have thus far been excluded from the training process, causing the learned latent dynamics to drift away from the discretized governing physics. This mismatch often limits generalization and forecasting capabilities. In this work, we propose Physics-informed ROM (Φ-ROM) by incorporating differentiable PDE solvers into the training procedure. Specifically, the latent space dynamics and its dependence on PDE parameters are shaped directly by the governing physics encoded in the solver, ensuring a strong correspondence between the full and reduced systems. Our model outperforms state-of-the-art data-driven ROMs and other physics-informed strategies by accurately generalizing to new dynamics arising from unseen parameters, enabling long-term forecasting beyond the training horizon, maintaining continuity in both time and space, and reducing the data cost. Furthermore, Φ-ROM learns to recover and forecast the solution fields even when trained or evaluated with sparse and irregular observations of the fields, providing a flexible framework for field reconstruction and data assimilation. We demonstrate the framework's robustness across various PDE solvers and highlight its broad applicability by providing an open-source JAX implementation that is readily extensible to other PDE systems and differentiable solvers, available at https://phi-rom.github.io.

Latent Diffusion Models (LDMs) are known to have an unstable generation process, where even small perturbations or shifts in the input noise can lead to significantly different outputs. This hinders their applicability in applications requiring consistent results. In this work, we redesign LDMs to enhance consistency by making them shift-equivariant. While introducing anti-aliasing operations can partially improve shift-equivariance, significant aliasing and inconsistency persist due to the unique challenges in LDMs, including 1) aliasing amplification during VAE training and multiple U-Net inferences, and 2) self-attention modules that inherently lack shift-equivariance. To address these issues, we redesign the attention modules to be shift-equivariant and propose an equivariance loss that effectively suppresses the frequency bandwidth of the features in the continuous domain. The resulting alias-free LDM (AF-LDM) achieves strong shift-equivariance and is also robust to irregular warping. Extensive experiments demonstrate that AF-LDM produces significantly more consistent results than vanilla LDM across various applications, including video editing and image-to-image translation. Code is available at: https://github.com/SingleZombie/AFLDM

Non-stationarity of an underlying data generating process that leads to distributional changes over time is a key characteristic of Data Streams. This phenomenon, commonly referred to as Concept Drift, has been intensively studied, and Concept Drift Detectors have been established as a class of methods for detecting such changes (drifts). For the most part, Drift Detectors compare regions (windows) of the data stream and detect drift if those windows are sufficiently dissimilar. In this work, we introduce the Window Dilemma, an observation that perceived drift is a product of windowing and not necessarily the underlying data generating process. Additionally, we highlight that drift detection is ill-posed, primarily because verification of drift events are implausible in practice. We demonstrate these contributions first by an illustrative example, followed by empirical comparisons of drift detectors against a variety of alternative adaptation strategies. Our main finding is that traditional batch learning techniques often perform better than their drift-aware counterparts further bringing into question the purpose of detectors in Stream Classification.

Recently, diffusion models have made remarkable progress in text-to-image (T2I) generation, synthesizing images with high fidelity and diverse contents. Despite this advancement, latent space smoothness within diffusion models remains largely unexplored. Smooth latent spaces ensure that a perturbation on an input latent corresponds to a steady change in the output image. This property proves beneficial in downstream tasks, including image interpolation, inversion, and editing. In this work, we expose the non-smoothness of diffusion latent spaces by observing noticeable visual fluctuations resulting from minor latent variations. To tackle this issue, we propose Smooth Diffusion, a new category of diffusion models that can be simultaneously high-performing and smooth. Specifically, we introduce Step-wise Variation Regularization to enforce the proportion between the variations of an arbitrary input latent and that of the output image is a constant at any diffusion training step. In addition, we devise an interpolation standard deviation (ISTD) metric to effectively assess the latent space smoothness of a diffusion model. Extensive quantitative and qualitative experiments demonstrate that Smooth Diffusion stands out as a more desirable solution not only in T2I generation but also across various downstream tasks. Smooth Diffusion is implemented as a plug-and-play Smooth-LoRA to work with various community models. Code is available at https://github.com/SHI-Labs/Smooth-Diffusion.

Recent advances in Conditional Diffusion Models have led to substantial capabilities in various domains. However, understanding the impact of variations in the initial seed vector remains an underexplored area of concern. Particularly, latent-based diffusion models display inconsistencies in image generation under standard conditions when initialized with suboptimal initial seed vectors. To understand the impact of the initial seed vector on generated samples, we propose a reliability evaluation framework that evaluates the generated samples of a diffusion model when the initial seed vector is subjected to various synthetic shifts. Our results indicate that slight manipulations to the initial seed vector of the state-of-the-art Stable Diffusion (Rombach et al., 2022) can lead to significant disturbances in the generated samples, consequently creating images without the effect of conditioning variables. In contrast, GLIDE (Nichol et al., 2022) stands out in generating reliable samples even when the initial seed vector is transformed. Thus, our study sheds light on the importance of the selection and the impact of the initial seed vector in the latent-based diffusion model.

Diffusion models have achieved remarkable success across diverse domains, with performance closely related to the denoising backbones that parameterize the score function. In this paper, we present a systematic, phase-aware analysis of diffusion components and show that abrupt, early-stage fluctuations in deep latents are strongly associated with artifacts. Guided by these findings, we introduce DUNE (Diffusion Unified Network refiNEr), a training-free refinement framework that detects abrupt deviations in deep low-noise internal latents using a shared EMA-based criterion, and applies backbone-specific suppression to the detector-selected entries. Although derived from U-Net, the same detect-suppress principle extends naturally to Transformer-based diffusion models by acting on the latents of deep self-attention blocks. Extensive experiments across multiple backbones indicate that DUNE improves fidelity while reducing hallucinations, offering new insight into where and when diffusion backbones should be controlled.

Generative modeling can be formulated as learning a mapping f such that its pushforward distribution matches the data distribution. The pushforward behavior can be carried out iteratively at inference time, for example in diffusion and flow-based models. In this paper, we propose a new paradigm called Drifting Models, which evolve the pushforward distribution during training and naturally admit one-step inference. We introduce a drifting field that governs the sample movement and achieves equilibrium when the distributions match. This leads to a training objective that allows the neural network optimizer to evolve the distribution. In experiments, our one-step generator achieves state-of-the-art results on ImageNet at 256 x 256 resolution, with an FID of 1.54 in latent space and 1.61 in pixel space. We hope that our work opens up new opportunities for high-quality one-step generation.

In federated learning (FL), the data distribution of each client may change over time, introducing both temporal and spatial data heterogeneity, known as concept drift. Data heterogeneity arises from three drift sources: real drift (a shift in the conditional distribution P(y|x)), virtual drift (a shift in the input distribution P(x)), and label drift (a shift in the label distribution P(y)). However, most existing FL methods addressing concept drift primarily focus on real drift. When clients experience virtual or label drift, these methods often fail to selectively retain useful historical knowledge, leading to catastrophic forgetting. A key challenge lies in distinguishing different sources of drift, as they require distinct adaptation strategies: real drift calls for discarding outdated data, while virtual or label drift benefits from retaining historical data. Without explicitly identifying the drift sources, a general adaptation strategy is suboptimal and may harm generalization. To address this challenge, we propose FedDAA, a dynamic clustered FL framework designed to adapt to multi-source concept drift while preserving valuable historical knowledge. Specifically, FedDAA integrates three modules: a cluster number determination module to find the optimal number of clusters; a real drift detection module to distinguish real drift from virtual/label drift; and a concept drift adaptation module to adapt to new data while retaining useful historical information. We provide theoretical convergence guarantees, and experiments show that FedDAA achieves 7.84% to 8.52% accuracy improvements over state-of-the-art methods on Fashion-MNIST, CIFAR-10, and CIFAR-100.

Frame-wise action-controlled image-to-video generation is a promising paradigm for interactive world simulation, where each control signal should elicit an immediate visual response. However, maintaining visual fidelity and 3D consistency over long autoregressive rollouts remains challenging. Existing 3D-aware methods often suffer from catastrophic drift due to two impediments: information loss from Latent--RGB Cycling, where generated latents are repeatedly decoded to RGB and re-encoded for future conditioning, and the training--inference gap induced by the error-free hypothesis, where clean training memory fails to match prediction-corrupted inference memory. To address these challenges, we present Robust Dreamer, a memory-augmented framework built around how to design 3D memory and how to use it robustly. First, we introduce Latent Gaussian Memory, which anchors diffusion latents inherited from the generation process to Gaussian primitives and recalls them via latent-space Gaussian splatting. This provides dense, geometry-aware, view-aligned conditioning while avoiding accumulated degradation from repeated VAE conversion. Second, we propose Deviation Learning with Dynamic Deviation Archive, which synthesizes rollout-induced latent deviations through a one-step approximation, stores them by autoregressive stage and denoising timestamp, and injects them into historical memory during training. This exposes the generator to realistic corrupted memory states and teaches internal correction before inference. Experiments on ScanNet, DL3DV, and OmniWorldGame demonstrate state-of-the-art long-horizon performance.

Recent advances have shown that sequential fine-tuning (SeqFT) of pre-trained vision transformers (ViTs), followed by classifier refinement using approximate distributions of class features, can be an effective strategy for class-incremental learning (CIL). However, this approach is susceptible to distribution drift, caused by the sequential optimization of shared backbone parameters. This results in a mismatch between the distributions of the previously learned classes and that of the updater model, ultimately degrading the effectiveness of classifier performance over time. To address this issue, we introduce a latent space transition operator and propose Sequential Learning with Drift Compensation (SLDC). SLDC aims to align feature distributions across tasks to mitigate the impact of drift. First, we present a linear variant of SLDC, which learns a linear operator by solving a regularized least-squares problem that maps features before and after fine-tuning. Next, we extend this with a weakly nonlinear SLDC variant, which assumes that the ideal transition operator lies between purely linear and fully nonlinear transformations. This is implemented using learnable, weakly nonlinear mappings that balance flexibility and generalization. To further reduce representation drift, we apply knowledge distillation (KD) in both algorithmic variants. Extensive experiments on standard CIL benchmarks demonstrate that SLDC significantly improves the performance of SeqFT. Notably, by combining KD to address representation drift with SLDC to compensate distribution drift, SeqFT achieves performance comparable to joint training across all evaluated datasets. Code: https://github.com/raoxuan98-hash/sldc.git.

Text-to-motion generation has advanced rapidly, yet two challenges persist. First, existing motion autoencoders compress each frame into a single monolithic latent vector, entangling trajectory and per-joint rotations in an unstructured representation that downstream generators struggle to model faithfully. Second, text-to-motion, pose-conditioned generation, and long-horizon sequential synthesis typically require separate models or task-specific mechanisms, with autoregressive approaches suffering from severe error accumulation over extended rollouts. We present PRISM, addressing each challenge with a dedicated contribution. (1) A joint-factorized motion latent space: each body joint occupies its own token, forming a structured 2D grid (time joints) compressed by a causal VAE with forward-kinematics supervision. This simple change to the latent space -- without modifying the generator -- substantially improves generation quality, revealing that latent space design has been an underestimated bottleneck. (2) Noise-free condition injection: each latent token carries its own timestep embedding, allowing conditioning frames to be injected as clean tokens (timestep0) while the remaining tokens are denoised. This unifies text-to-motion and pose-conditioned generation in a single model, and directly enables autoregressive segment chaining for streaming synthesis. Self-forcing training further suppresses drift in long rollouts. With these two components, we train a single motion generation foundation model that seamlessly handles text-to-motion, pose-conditioned generation, autoregressive sequential generation, and narrative motion composition, achieving state-of-the-art on HumanML3D, MotionHub, BABEL, and a 50-scenario user study.

Inertial sensors play a pivotal role in indoor localization, which in turn lays the foundation for pervasive personal applications. However, low-cost inertial sensors, as commonly found in smartphones, are plagued by bias and noise, which leads to unbounded growth in error when accelerations are double integrated to obtain displacement. Small errors in state estimation propagate to make odometry virtually unusable in a matter of seconds. We propose to break the cycle of continuous integration, and instead segment inertial data into independent windows. The challenge becomes estimating the latent states of each window, such as velocity and orientation, as these are not directly observable from sensor data. We demonstrate how to formulate this as an optimization problem, and show how deep recurrent neural networks can yield highly accurate trajectories, outperforming state-of-the-art shallow techniques, on a wide range of tests and attachments. In particular, we demonstrate that IONet can generalize to estimate odometry for non-periodic motion, such as a shopping trolley or baby-stroller, an extremely challenging task for existing techniques.

The world evolves following its dynamics, i.e., its laws of motion. However, leading video diffusion models largely fit the pixels without modeling how the pixels transit over time. Thus, they render visually plausible frames but may not accurately obey the laws. To capture the dynamics purely from pixels, we introduce Latent Dynamics Reasoning (LDR). LDR casts the latent transition as an explicit kinematic integration, where the lower-order dynamics are integrated numerically and the model regresses only the third- and higher-order residual that drives the rollout. For this integration to extrapolate better, LDR runs it on a structured latent rather than dense convolutional features. Following PhyWorld, we validate LDR on a controlled white-box physics benchmark spanning five tasks (uniform motion, parabola, collision, bouncing, looming), focusing on out-of-distribution scenarios that reveal whether a model has truly learned the underlying dynamics. LDR extrapolates the learned dynamics far better: the gap between its in- and out-of-distribution error is over 20times smaller than the video diffusion baseline's, under both single- and joint-task training at 256^2 resolution, while using 26times fewer parameters and running 143times faster. LDR can even generalize under severe shift: for example, trained only on red balls moving left-to-right, it correctly predicts the motion of a blue square moving right-to-left. To our knowledge, this is the first video world model that extrapolates learned dynamics beyond its training distribution. Project page: https://lat-dyn-reason.github.io/

Virtual try-on (VITON) aims to generate realistic images of a person wearing a target garment, requiring precise garment alignment in try-on regions and faithful preservation of identity and background in non-try-on regions. While latent diffusion models (LDMs) have advanced alignment and detail synthesis, preserving non-try-on regions remains challenging. A common post-hoc strategy directly replaces these regions with original content, but abrupt transitions often produce boundary artifacts. To overcome this, we reformulate VITON as a linear inverse problem and adopt trajectory-aligned solvers that progressively enforce measurement consistency, reducing abrupt changes in non-try-on regions. However, existing solvers still suffer from semantic drift during generation, leading to artifacts. We propose ART-VITON, a measurement-guided diffusion framework that ensures measurement adherence while maintaining artifact-free synthesis. Our method integrates residual prior-based initialization to mitigate training-inference mismatch and artifact-free measurement-guided sampling that combines data consistency, frequency-level correction, and periodic standard denoising. Experiments on VITON-HD, DressCode, and SHHQ-1.0 demonstrate that ART-VITON effectively preserves identity and background, eliminates boundary artifacts, and consistently improves visual fidelity and robustness over state-of-the-art baselines.

Latent Video Diffusion Models (LVDMs) achieve high-quality generation but are sensitive to imperfect conditioning, which causes semantic drift and temporal incoherence on noisy, web-scale video-text datasets. We introduce CAT-LVDM, the first corruption-aware training framework for LVDMs that improves robustness through structured, data-aligned noise injection. Our method includes Batch-Centered Noise Injection (BCNI), which perturbs embeddings along intra-batch semantic directions to preserve temporal consistency. BCNI is especially effective on caption-rich datasets like WebVid-2M, MSR-VTT, and MSVD. We also propose Spectrum-Aware Contextual Noise (SACN), which injects noise along dominant spectral directions to improve low-frequency smoothness, showing strong results on UCF-101. On average, BCNI reduces FVD by 31.9% across WebVid-2M, MSR-VTT, and MSVD, while SACN yields a 12.3% improvement on UCF-101. Ablation studies confirm the benefit of low-rank, data-aligned noise. Our theoretical analysis further explains how such perturbations tighten entropy, Wasserstein, score-drift, mixing-time, and generalization bounds. CAT-LVDM establishes a principled, scalable training approach for robust video diffusion under multimodal noise. Code and models: https://github.com/chikap421/catlvdm

Given a monocular video, the goal of video re-rendering is to generate views of the scene from a novel camera trajectory. Existing methods face two distinct challenges. Geometrically unconditioned models lack spatial awareness, leading to drift and deformation under viewpoint changes. On the other hand, geometrically-conditioned models depend on estimated depth and explicit reconstruction, making them susceptible to depth inaccuracies and calibration errors. We propose to address these challenges by using the implicit geometric knowledge embedded in the latent space of a large 4D reconstruction model to condition the video generation process. These latents capture scene structure in a continuous space without explicit reconstruction. Therefore, they provide a flexible representation that allows the pretrained diffusion prior to regularize errors more effectively. By jointly conditioning on these latents and source camera poses, we demonstrate that our model achieves state-of-the-art results on the video re-rendering task. Project webpage is https://lavr-4d-scene-rerender.github.io/

Irregular multivariate time series impose a trade-off for long-horizon forecasting: discrete methods can distort temporal structure via re-gridding, while continuous-time models often require sequential solvers prone to drift. To bridge this gap, we present Latent Laplace Diffusion (LLapDiff), a generative framework that models the target as a low-dimensional latent trajectory, enabling horizon-wide generation without step-by-step integration over physical time. We guide the reverse process utilizing a stable modal parameterization motivated by stochastic port-Hamiltonian dynamics, and parameterize its mean evolution in the Laplace domain via learnable complex-conjugate poles, enabling direct evaluation over irregular timestamps. We also link continuous dynamics to irregular observations through renewal-averaging analysis, which maps sampling gaps to effective event-domain poles and motivates a gap-aware history summarizer. Extensive experiments show that LLapDiff improves over baselines in long-horizon forecasting, and its continuous-time generative nature supports missing-value imputation by querying the same model at historical timestamps. Code is available at https://github.com/pixelhero98/LLapDiffusion.

Consistency models are a new family of generative models capable of producing high-quality samples in either a single step or multiple steps. Recently, consistency models have demonstrated impressive performance, achieving results on par with diffusion models in the pixel space. However, the success of scaling consistency training to large-scale datasets, particularly for text-to-image and video generation tasks, is determined by performance in the latent space. In this work, we analyze the statistical differences between pixel and latent spaces, discovering that latent data often contains highly impulsive outliers, which significantly degrade the performance of iCT in the latent space. To address this, we replace Pseudo-Huber losses with Cauchy losses, effectively mitigating the impact of outliers. Additionally, we introduce a diffusion loss at early timesteps and employ optimal transport (OT) coupling to further enhance performance. Lastly, we introduce the adaptive scaling-c scheduler to manage the robust training process and adopt Non-scaling LayerNorm in the architecture to better capture the statistics of the features and reduce outlier impact. With these strategies, we successfully train latent consistency models capable of high-quality sampling with one or two steps, significantly narrowing the performance gap between latent consistency and diffusion models. The implementation is released here: https://github.com/quandao10/sLCT/

Automated analysis of complex systems based on multiple readouts remains a challenge. Change point detection algorithms are aimed to locating abrupt changes in the time series behaviour of a process. In this paper, we present a novel change point detection algorithm based on Latent Neural Stochastic Differential Equations (SDE). Our method learns a non-linear deep learning transformation of the process into a latent space and estimates a SDE that describes its evolution over time. The algorithm uses the likelihood ratio of the learned stochastic processes in different timestamps to find change points of the process. We demonstrate the detection capabilities and performance of our algorithm on synthetic and real-world datasets. The proposed method outperforms the state-of-the-art algorithms on the majority of our experiments.

Steering large language models (LLMs) is usually done by either instruction prompting or activation steering. Prompting often gives strong control, but caches guidance tokens at every layer and can clutter long interactions; activation steering is compact but typically weaker and does not support large structured reminders. We introduce memory inception (MI), a training-free method that steers in latent attention space by inserting text-derived key-value (KV) banks only at selected layers. Rather than materializing reminder content throughout the prompt cache, MI treats steering as selective KV allocation, injecting latent slots only where the model routes to them. On matched personality-steering tasks, MI gives the best overall control--drift trade-off, remaining competitive with prompting while consistently outperforming CAA. On updateable guidance, MI supports mid-conversation behavior shifts without rewriting the visible transcript, achieving the highest post-shift alignment on Qwen3. On structured reasoning, MI outperforms visible prompting on HARDMath and PHYSICS (10/12 subjecttimesmode cells), serving as proxies for structured reasoning in verifiable domains, while cutting content-matched KV storage by up to 118times. These results position MI as a powerful steering method when guidance is persistent, structured, or expensive to keep in the visible transcript.

Modeling the time-dependent evolution of electron density is essential for understanding quantum mechanical behaviors of condensed matter and enabling predictive simulations in spectroscopy, photochemistry, and ultrafast science. Yet, while machine learning methods have advanced static density prediction, modeling its spatiotemporal dynamics remains largely unexplored. In this work, we introduce a generative framework that combines a 3D convolutional autoencoder with a latent diffusion model (LDM) to learn electron density trajectories from ab-initio molecular dynamics (AIMD) simulations. Our method encodes electron densities into a compact latent space and predicts their future states by sampling from the learned conditional distribution, enabling stable long-horizon rollouts without drift or collapse. To preserve statistical fidelity, we incorporate a scaled Jensen-Shannon divergence regularization that aligns generated and reference density distributions. On AIMD trajectories of liquid lithium at 800 K, our model accurately captures both the spatial correlations and the log-normal-like statistical structure of the density. The proposed framework has the potential to accelerate the simulation of quantum dynamics and overcome key challenges faced by current spatiotemporal machine learning methods as surrogates of quantum mechanical simulators.

We propose EverAnimate, an efficient post-training method for long-horizon animated video generation that preserves visual quality and character identity. Long-form animation remains challenging because highly dynamic human motion must be synthesized against relatively static environments, making chunk-based generation prone to accumulated drift: (i) low-level quality drift, such as progressive degradation of static backgrounds, and (ii) high-level semantic drift, such as inconsistent character identity and view-dependent attributes. To address this issue, EverAnimate restores drifted flow trajectories by anchoring generation to a persistent latent context memory, consisting of two complementary mechanisms. (i) Persistent Latent Propagation maintains a context memory across chunks to propagate identity and motion in latent space while mitigating temporal forgetting. (ii) Restorative Flow Matching introduces an implicit restoration objective during sampling through velocity adjustment, improving within-chunk fidelity. With only lightweight LoRA tuning, EverAnimate outperforms state-of-the-art long-animation methods in both short- and long-horizon settings: at 10 seconds, it improves PSNR/SSIM by 8%/7% and reduces LPIPS/FID by 22%/11%; at 90 seconds, the gains increase to 15%/15% and 32%/27%, respectively.

Temporal abstraction and efficient planning pose significant challenges in offline reinforcement learning, mainly when dealing with domains that involve temporally extended tasks and delayed sparse rewards. Existing methods typically plan in the raw action space and can be inefficient and inflexible. Latent action spaces offer a more flexible paradigm, capturing only possible actions within the behavior policy support and decoupling the temporal structure between planning and modeling. However, current latent-action-based methods are limited to discrete spaces and require expensive planning. This paper presents a unified framework for continuous latent action space representation learning and planning by leveraging latent, score-based diffusion models. We establish the theoretical equivalence between planning in the latent action space and energy-guided sampling with a pretrained diffusion model and incorporate a novel sequence-level exact sampling method. Our proposed method, LatentDiffuser, demonstrates competitive performance on low-dimensional locomotion control tasks and surpasses existing methods in higher-dimensional tasks.

Looped computation shows promise in improving the reasoning-oriented performance of LLMs by scaling test-time compute. However, existing approaches typically require either training recurrent models from scratch or applying disruptive retrofits, which involve substantial computational costs and may compromise pretrained capabilities. To address these limitations, we introduce Looped Depth Up-Scaling (LoopUS), a post-training framework that converts a standard pretrained LLM into a looped architecture. As a key technical contribution, LoopUS recasts the pretrained LLM into an encoder, a looped reasoning block, and a decoder. It operationalizes this latent-refinement architecture through four core components: (1) block decomposition, guided by staged representation dynamics; (2) an input-dependent selective gate to mitigate hidden-state drift; (3) random deep supervision for memory-efficient learning over long recursive horizons; and (4) a confidence head for adaptive early exiting. Collectively, these mechanisms transform a standard non-looped model into a looped form while stabilizing it against both computational bottlenecks and representation collapse. Through stable latent looping, LoopUS improves reasoning-oriented performance without extending the generated traces or requiring recurrent training from scratch. For more details, see https://thrillcrazyer.github.io/LoopUS

Unified multimodal models (UMMs) achieve strong performance in both understanding and generation by learning a shared latent space, yet they often exhibit functional inconsistency between these two capabilities. We observe that this issue does not stem from a lack of shared representations, but from the absence of explicit alignment between the transformations that map into and out of the latent space. As a result, generation and re-encoding can follow inconsistent trajectories, leading to semantic drift under modality transitions. In this work, we propose LatentUMM, a framework that constructs an enhanced shared latent space to explicitly align these transformations and improve cross-modal consistency. LatentUMM consists of two stages. First, dual latent alignment enforces consistency at both the modality and capacity levels: cross-modal alignment uses a stronger embedding model to impose structured cross-modal semantics, while dual capacity alignment enforces bidirectional consistency under generation and re-encoding. Second, latent dynamics stabilization improves robustness via stochastic latent rollouts and preference optimization, favoring trajectories that better preserve semantic consistency. Experiments show that LatentUMM consistently improves multimodal consistency across diverse architectures. Code is available at: https://github.com/AIFrontierLab/TorchUMM/tree/main/src/umm/post_training/LatentUMM.

Vision-language-action (VLA) models aim to map multimodal inputs to robot actions. However, most existing approaches struggle to cover complex dynamic scenarios due to treating all visual tokens uniformly and reasoning with human-selected factors, which lack mechanisms to emphasize task-critical evidence and ignore underlying factors. To address this issue, we propose LEEVLA, a VLA architecture for seeing what matters in Latent Environment Evolution that explicitly guides the model toward informative regions while preserving the structured evolution of latent world representations. To identify salient and instruction-relevant regions, we introduce drift-guided dynamic prioritization (DGDP), which combines dynamic position prioritization (DPP) with semantic drift guidance (SDG) to guide the VLA agent where to attend during training. On top of this, we introduce structured feature flow generation (SFFG), which models how these prioritized features should evolve in latent space via prototype-to-periphery (P2P) prediction, and a mutual-neighborhood contrastive (MC) loss to maintain topological consistency among neighborhoods. Together, DGDP and SFFG form a task-aware "where-how" training framework. Extensive experiments on VLA benchmarks show that LEEVLA consistently outperforms prior methods, confirming that explicit task-evidence guidance and structured latent reasoning are both crucial for scalable VLA. Our code is available at https://github.com/LyuQi127/LEEVLA.

Modern LLM agents combine long-term memory for personalization with tool-calling interfaces for taking actions in the world -- a combination underpinning contemporary production systems. We study a previously unexamined failure of this combination: when personality-driven biases stored in memory (cost-consciousness, impatience, risk tolerance, etc.) silently affect tool calls in contexts where they are not applicable. We call this memory-induced tool-drift and operationalize it through MEMDRIFT, a benchmark of 105 scenarios spanning five bias dimensions and seven professional domains, generated through an automated adversarial pipeline. Across seven frontier models -- including those with extended reasoning -- biased memories raise deflection scores (a judge-scored measure of parameter deviation from unbiased baselines) by up to +3.6 points on a 1--5 scale. Tool-drift persists when memory management is handled by three production memory architectures. The phenomenon affects real-world tools: scanning 6{,}062 tools across 288 verified MCP servers, we flag 608 with susceptible parameters and confirm tool-drift on a validated subset. Mechanistically, biased memories act as implicit steering vectors, pushing activations along the same latent directions as explicit behavioral instructions. They also redistribute attention from task-relevant context toward memory entries with surface-level keyword overlap to the target parameter. Standard defenses -- prompt-based relevance instructions and memory filters -- reduce drift but do not eliminate it. As agents take increasingly consequential actions on a user's behalf, memory-induced tool-drift represents a systematic vulnerability that current safeguards do not address, motivating dedicated defenses at the intersection of memory management and tool-call generation.

Data Drift is the phenomenon where the generating model behind the data changes over time. Due to data drift, any model built on the past training data becomes less relevant and inaccurate over time. Thus, detecting and controlling for data drift is critical in machine learning models. Hierarchical Temporal Memory (HTM) is a machine learning model developed by Jeff Hawkins, inspired by how the human brain processes information. It is a biologically inspired model of memory that is similar in structure to the neocortex, and whose performance is claimed to be comparable to state of the art models in detecting anomalies in time series data. Another unique benefit of HTMs is its independence from training and testing cycle; all the learning takes place online with streaming data and no separate training and testing cycle is required. In sequential learning paradigm, Sequential Probability Ratio Test (SPRT) offers some unique benefit for online learning and inference. This paper proposes a novel hybrid framework combining HTM and SPRT for real-time data drift detection and anomaly identification. Unlike existing data drift methods, our approach eliminates frequent retraining and ensures low false positive rates. HTMs currently work with one dimensional or univariate data. In a second study, we also propose an application of HTM in multidimensional supervised scenario for anomaly detection by combining the outputs of multiple HTM columns, one for each dimension of the data, through a neural network. Experimental evaluations demonstrate that the proposed method outperforms conventional drift detection techniques like the Kolmogorov-Smirnov (KS) test, Wasserstein distance, and Population Stability Index (PSI) in terms of accuracy, adaptability, and computational efficiency. Our experiments also provide insights into optimizing hyperparameters for real-time deployment in domains such as Telecom.

Large language models internalize a structural trade-off between truthfulness and obsequious flattery, emerging from reward optimization that conflates helpfulness with polite submission. This latent bias, known as sycophancy, manifests as a preference for user agreement over principled reasoning. We introduce Beacon, a single-turn forced-choice benchmark that isolates this bias independent of conversational context, enabling precise measurement of the tension between factual accuracy and submissive bias. Evaluations across twelve state-of-the-art models reveal that sycophancy decomposes into stable linguistic and affective sub-biases, each scaling with model capacity. We further propose prompt-level and activation-level interventions that modulate these biases in opposing directions, exposing the internal geometry of alignment as a dynamic manifold between truthfulness and socially compliant judgment. Beacon reframes sycophancy as a measurable form of normative misgeneralization, providing a reproducible foundation for studying and mitigating alignment drift in large-scale generative systems.

This paper introduces a continuous-time stochastic dynamical framework for understanding how large language models (LLMs) may self-amplify latent biases or toxicity through their own chain-of-thought reasoning. The model posits an instantaneous "severity" variable x(t) in [0,1] evolving under a stochastic differential equation (SDE) with a drift term μ(x) and diffusion σ(x). Crucially, such a process can be consistently analyzed via the Fokker--Planck approach if each incremental step behaves nearly Markovian in severity space. The analysis investigates critical phenomena, showing that certain parameter regimes create phase transitions from subcritical (self-correcting) to supercritical (runaway severity). The paper derives stationary distributions, first-passage times to harmful thresholds, and scaling laws near critical points. Finally, it highlights implications for agents and extended LLM reasoning models: in principle, these equations might serve as a basis for formal verification of whether a model remains stable or propagates bias over repeated inferences.

Looped Transformers have emerged as an efficient and powerful class of models for reasoning in the language domain. Recent studies show that these models achieve strong performance on algorithmic and reasoning tasks, suggesting that looped architectures possess an inductive bias toward latent reasoning. However, prior approaches fix the number of loop iterations during training and inference, leaving open the question of whether these models can flexibly adapt their computational depth under variable compute budgets. We introduce LoopFormer, a looped Transformer trained on variable-length trajectories to enable budget-conditioned reasoning. Our core contribution is a shortcut-consistency training scheme that aligns trajectories of different lengths, ensuring that shorter loops yield informative representations while longer loops continue to refine them. LoopFormer conditions each loop on the current time and step size, enabling representations to evolve consistently across trajectories of varying length rather than drifting or stagnating. Empirically, LoopFormer demonstrates robust performance on language modeling and reasoning benchmarks even under aggressive compute constraints, while scaling gracefully with additional budget. These results show that looped Transformers are inherently suited for adaptive language modeling, opening a path toward controllable and budget-aware large language models.

Converting pretrained attention modules such as grouped-query attention (GQA) into multi-head latent attention (MLA) can improve expressivity without increasing KV-cache cost, making it attractive for efficient inference. However, many practical conversion baselines rely on weight-only low-rank approximations (e.g., SVD-style initializations) and uniform rank allocation. They focus on minimizing the difference between weight matrices rather than on how those weights affect input activations, ignore the covariance structure of activations, and enforce uniform rank across layers, causing activation drift and degraded attention fidelity. To address these issues, we propose CARE, a Covariance-Aware, Rank-Enhanced MLA conversion pipeline under a fixed KV width. CARE introduces three key steps: (i) activation-preserving factorization, which aligns the approximation with the actual input activations rather than just the weights; (ii) adjusted-rank allocation, which spreads a fixed KV budget across layers by giving more capacity to layers that need it most; and (iii) KV-parity mapping, which reparameterizes the converted K and V to fit the MLA format while keeping the KV-cache size unchanged. Our method outperforms a uniform-rank SVD baseline on Qwen3-4B/30B-A3B-Instruct-2507 and Llama-3.1-8B/70B-Instruct, reducing one-shot perplexity by up to 215x and improving mean accuracy by up to 1.70x at matched KV budgets. With a brief post-SVD healing fine-tune, we fully recover the original model's accuracy.

Sampling from the posterior distribution poses a major computational challenge in solving inverse problems using latent diffusion models. Common methods rely on Tweedie's first-order moments, which are known to induce a quality-limiting bias. Existing second-order approximations are impractical due to prohibitive computational costs, making standard reverse diffusion processes intractable for posterior sampling. This paper introduces Second-order Tweedie sampler from Surrogate Loss (STSL), a novel sampler that offers efficiency comparable to first-order Tweedie with a tractable reverse process using second-order approximation. Our theoretical results reveal that the second-order approximation is lower bounded by our surrogate loss that only requires O(1) compute using the trace of the Hessian, and by the lower bound we derive a new drift term to make the reverse process tractable. Our method surpasses SoTA solvers PSLD and P2L, achieving 4X and 8X reduction in neural function evaluations, respectively, while notably enhancing sampling quality on FFHQ, ImageNet, and COCO benchmarks. In addition, we show STSL extends to text-guided image editing and addresses residual distortions present from corrupted images in leading text-guided image editing methods. To our best knowledge, this is the first work to offer an efficient second-order approximation in solving inverse problems using latent diffusion and editing real-world images with corruptions.

World Action Models (WAMs) have emerged as a powerful paradigm for embodied intelligence, yet the prevailing reliance on pixel-level video generation creates a fundamental bottleneck. Forcing models to reconstruct task-irrelevant visual details dissipates representational capacity and renders policies vulnerable to visual distractors. In this paper, we propose LeapBot-WA, which establishes a novel Predictive-Latent paradigm for WAMs by operationalizing the Joint-Embedding Predictive Architecture (JEPA) as a World-Anchor. Departing from the traditional reliance on visual synthesis, LeapBot-WA shifts the core of world modeling to Predictive Semantic Alignment, extracting abstract physical dynamics directly within a latent foundation space. To bridge the modality gap between non-Gaussian predictive features and diffusion priors, we introduce the Isotropic Semantic Autoencoder (ISAE), which reshapes the anchor's latent space into a diffusion-friendly manifold to prevent off-manifold drift. Furthermore, we design an Asymmetric Mixture-of-Transformers (MoT) architecture. During training, an Anchor Diffusion Transformer acts as a privileged dynamics expert to guide the Action Diffusion Transformer; at inference, this heavy dynamics branch is pruned, enabling zero-overhead execution. LeapBot-WA achieves state-of-the-art performance among predictive models on LIBERO and matches top-tier generative WAMs on RoboTwin 2.0 without requiring large-scale trajectory pre-training. It further demonstrates superior zero-shot robustness to unseen environments and successful real-world transfer, establishing a highly efficient and robust latent-centric paradigm for scalable robotic control. Code: https://github.com/LeapWM/leapbot-wa.

Virtual Try-On (VTON) aims to synthesize photorealistic images of garments precisely aligned with a person's body and pose. Current diffusion-based methods, however, face a fundamental trade-off between structural integrity and textural fidelity. In this paper, we formalize this challenge as a consequence of complementary inductive biases inherent in prevailing architectures: models heavily reliant on spatial constraints naturally favor geometric alignment but often suppress textures, whereas models dominated by unconstrained generative priors excel at vibrant detail rendering but are prone to structural drift. Based on this diagnosis, we propose LPH-VTON, a new synergistic framework that resolves this tension within a single, continuous denoising process. LPH-VTON strategically decomposes the generation, leveraging a structure-biased model to establish a geometrically consistent latent scaffold in the early stages, before handing over control to a texture-biased model for high-fidelity detail rendering. Extensive experiments validate our approach. Our model achieves a superior Pareto-optimal balance, establishing new benchmarks in perceptual faithfulness while maintaining highly competitive structural alignment across the standard dataset VITON-HD, proving the efficacy of temporal architectural decoupling.

Latent Diffusion models (LDMs) have achieved remarkable results in synthesizing high-resolution images. However, the iterative sampling process is computationally intensive and leads to slow generation. Inspired by Consistency Models (song et al.), we propose Latent Consistency Models (LCMs), enabling swift inference with minimal steps on any pre-trained LDMs, including Stable Diffusion (rombach et al). Viewing the guided reverse diffusion process as solving an augmented probability flow ODE (PF-ODE), LCMs are designed to directly predict the solution of such ODE in latent space, mitigating the need for numerous iterations and allowing rapid, high-fidelity sampling. Efficiently distilled from pre-trained classifier-free guided diffusion models, a high-quality 768 x 768 2~4-step LCM takes only 32 A100 GPU hours for training. Furthermore, we introduce Latent Consistency Fine-tuning (LCF), a novel method that is tailored for fine-tuning LCMs on customized image datasets. Evaluation on the LAION-5B-Aesthetics dataset demonstrates that LCMs achieve state-of-the-art text-to-image generation performance with few-step inference. Project Page: https://latent-consistency-models.github.io/

Many political science theories relate to latent variables, but such quantities cannot be observed directly and must instead be estimated from data with inherent uncertainty. In regression models, when a variable is measured with error, its slope coefficient is known to be biased toward zero. We show how measurement error interacts with unique aspects of latent variable estimation, identification restrictions in particular, and demonstrate how common error adjustment strategies can worsen bias. We introduce a method for adjusting coefficients on latent predictors, which reduces bias and typically increases the magnitude of estimated coefficients, often dramatically. We illustrate these dynamics using several different estimation strategies for the latent predictors. Corrected estimates using our proposed method show stronger relationships -- sometimes up to 50% larger -- than those from naive regression. Our findings highlight the importance of considering measurement error in latent predictors and the inadequacy of many commonly used approaches for dealing with this issue.

In recent years, generative pre-trained paradigms such as Large Language Models (LLMs) and Large Vision Models (LVMs) have achieved revolutionary advancements and widespread real-world applications. Particularly, the emergence of pre-trained LLMs-based temporal works, compared to previous deep model approaches, has demonstrated superior generalization and robustness, showcasing the potential of generative pre-trained paradigms as foundation models for time series. However, those LLMs-based works mainly focus on cross-modal research, i.e., leveraging the language capabilities of LLMs in time series contexts. Although they have achieved impressive performance, there still exist the issues of concept drift caused by differences in data distribution and inflexibility caused by misalignment of dimensions. To this end, inspired by recent work on LVMs, we reconsider the paradigm of time series modeling. In this paper, we comprehensively explore, for the first time, the effectiveness and superiority of the Generative Pre-trained Diffusion (GPD) paradigm in real-world multivariate time series forecasting (TSF). Specifically, to mitigate performance bias introduced by sophisticated networks, we propose a straightforward MLP diffusion network for unconditional modeling of time series. Then we employ a zero-shot and tuning-free method to predict (generate) future data using historical data as prompts. The GPD paradigm is established on the time series modality, effectively preventing the phenomenon of concept drift, and enabling flexible forecasting of arbitrary lengths. We demonstrate that the GPD paradigm achieves comprehensive performance and generalization comparable to current SOTA LLM-based and deep model paradigms on mainstream benchmarks and various TSF tasks. Extensive experiments validate the potential of the GPD paradigm and its assistance in future related research.

Latent diffusion models have emerged as the dominant framework for high-fidelity and efficient image generation, owing to their ability to learn diffusion processes in compact latent spaces. However, while previous research has focused primarily on reconstruction accuracy and semantic alignment of the latent space, we observe that another critical factor, robustness to sampling perturbations, also plays a crucial role in determining generation quality. Through empirical and theoretical analyses, we show that the commonly used β-VAE-based tokenizers in latent diffusion models, tend to produce overly compact latent manifolds that are highly sensitive to stochastic perturbations during diffusion sampling, leading to visual degradation. To address this issue, we propose a simple yet effective solution that constructs a latent space robust to sampling perturbations while maintaining strong reconstruction fidelity. This is achieved by introducing a Variance Expansion loss that counteracts variance collapse and leverages the adversarial interplay between reconstruction and variance expansion to achieve an adaptive balance that preserves reconstruction accuracy while improving robustness to stochastic sampling. Extensive experiments demonstrate that our approach consistently enhances generation quality across different latent diffusion architectures, confirming that robustness in latent space is a key missing ingredient for stable and faithful diffusion sampling.

Latent prediction--where agents learn by predicting their own latents--has emerged as a powerful paradigm for training general representations in machine learning. In reinforcement learning (RL), this approach has been explored to define auxiliary losses for a variety of settings, including reward-based and unsupervised RL, behavior cloning, and world modeling. While existing methods are typically limited to single-task learning, one-step prediction, or on-policy trajectory data, we show that temporal difference (TD) learning enables learning representations predictive of long-term latent dynamics across multiple policies from offline, reward-free transitions. Building on this, we introduce TD-JEPA, which leverages TD-based latent-predictive representations into unsupervised RL. TD-JEPA trains explicit state and task encoders, a policy-conditioned multi-step predictor, and a set of parameterized policies directly in latent space. This enables zero-shot optimization of any reward function at test time. Theoretically, we show that an idealized variant of TD-JEPA avoids collapse with proper initialization, and learns encoders that capture a low-rank factorization of long-term policy dynamics, while the predictor recovers their successor features in latent space. Empirically, TD-JEPA matches or outperforms state-of-the-art baselines on locomotion, navigation, and manipulation tasks across 13 datasets in ExoRL and OGBench, especially in the challenging setting of zero-shot RL from pixels.

Time series forecasting always faces the challenge of concept drift, where data distributions evolve over time, leading to a decline in forecast model performance. Existing solutions are based on online learning, which continually organize recent time series observations as new training samples and update model parameters according to the forecasting feedback on recent data. However, they overlook a critical issue: obtaining ground-truth future values of each sample should be delayed until after the forecast horizon. This delay creates a temporal gap between the training samples and the test sample. Our empirical analysis reveals that the gap can introduce concept drift, causing forecast models to adapt to outdated concepts. In this paper, we present Proceed, a novel proactive model adaptation framework for online time series forecasting. Proceed first estimates the concept drift between the recently used training samples and the current test sample. It then employs an adaptation generator to efficiently translate the estimated drift into parameter adjustments, proactively adapting the model to the test sample. To enhance the generalization capability of the framework, Proceed is trained on synthetic diverse concept drifts. Extensive experiments on five real-world datasets across various forecast models demonstrate that Proceed brings more performance improvements than the state-of-the-art online learning methods, significantly facilitating forecast models' resilience against concept drifts. Code is available at https://github.com/SJTU-DMTai/OnlineTSF.

The change in data distribution over time, also known as concept drift, poses a significant challenge to the reliability of online learning methods. Existing methods typically require model retraining or drift detection, both of which demand high computational costs and are often unsuitable for real-time applications. To address these limitations, a lightweight, fast and efficient random vector functional-link network termed Lite-RVFL is proposed, capable of adapting to concept drift without drift detection and retraining. Lite-RVFL introduces a novel objective function that assigns weights exponentially increasing to new samples, thereby emphasizing recent data and enabling timely adaptation. Theoretical analysis confirms the feasibility of this objective function for drift adaptation, and an efficient incremental update rule is derived. Experimental results on a real-world safety assessment task validate the efficiency, effectiveness in adapting to drift, and potential to capture temporal patterns of Lite-RVFL. The source code is available at https://github.com/songqiaohu/Lite-RVFL.

Data drift is the change in model input data that is one of the key factors leading to machine learning models performance degradation over time. Monitoring drift helps detecting these issues and preventing their harmful consequences. Meaningful drift interpretation is a fundamental step towards effective re-training of the model. In this study we propose an end-to-end framework for reliable model-agnostic change-point detection and interpretation in large task-oriented dialog systems, proven effective in multiple customer deployments. We evaluate our approach and demonstrate its benefits with a novel variant of intent classification training dataset, simulating customer requests to a dialog system. We make the data publicly available.

Large Language Models (LLMs) excel at single-turn tasks such as instruction following and summarization, yet real-world deployments require sustained multi-turn interactions where user goals and conversational context persist and evolve. A recurring challenge in this setting is context drift: the gradual divergence of a model's outputs from goal-consistent behavior across turns. Unlike single-turn errors, drift unfolds temporally and is poorly captured by static evaluation metrics. In this work, we present a study of context drift in multi-turn interactions and propose a simple dynamical framework to interpret its behavior. We formalize drift as the turn-wise KL divergence between the token-level predictive distributions of the test model and a goal-consistent reference model, and propose a recurrence model that interprets its evolution as a bounded stochastic process with restoring forces and controllable interventions. We instantiate this framework in both synthetic long-horizon rewriting tasks and realistic user-agent simulations such as in tau-Bench, measuring drift for several open-weight LLMs that are used as user simulators. Our experiments consistently reveal stable, noise-limited equilibria rather than runaway degradation, and demonstrate that simple reminder interventions reliably reduce divergence in line with theoretical predictions. Together, these results suggest that multi-turn drift can be understood as a controllable equilibrium phenomenon rather than as inevitable decay, providing a foundation for studying and mitigating context drift in extended interactions.

Latent diffusion models leverage visual tokenizers to compress images into latent spaces for efficient generative modeling. However, better reconstruction quality of a tokenizer does not necessarily translate into better generation quality, suggesting that latent representations should be evaluated not only by fidelity but also by their diffusability. Recent studies have proposed diverse explanations for diffusion-friendly latent spaces, including semantic separability, affine equivariance, distribution uniformity, spatial structure, spectral smoothness, and manifold continuity. Yet these properties are often validated on a limited set of tokenizers, leaving it unclear which factors are most predictive of downstream generation quality and whether such conclusions hold beyond the specific settings in which they are introduced. In this work, we conduct a systematic study of latent diffusability by training a large collection of tokenizers with diverse regularization strategies, architectures, and latent configurations, and evaluating them with multiple downstream diffusion backbones. Our analysis identifies several latent properties that consistently correlate with generation quality and exhibit strong generalization across experimental settings. Beyond existing metrics, we introduce Velocity Irreducible Variance (VIV), a measure of velocity ambiguity induced by trajectory crossings. Extensive experiments show that VIV is one of the most stable predictors of generation quality.

Visual artifacts remain a persistent challenge in diffusion models, even with training on massive datasets. Current solutions primarily rely on supervised detectors, yet lack understanding of why these artifacts occur in the first place. In our analysis, we identify three distinct phases in the diffusion generative process: Profiling, Mutation, and Refinement. Artifacts typically emerge during the Mutation phase, where certain regions exhibit anomalous score dynamics over time, causing abrupt disruptions in the normal evolution pattern. This temporal nature explains why existing methods focusing only on spatial uncertainty of the final output fail at effective artifact localization. Based on these insights, we propose ASCED (Abnormal Score Correction for Enhancing Diffusion), that detects artifacts by monitoring abnormal score dynamics during the diffusion process, with a trajectory-aware on-the-fly mitigation strategy that appropriate generation of noise in the detected areas. Unlike most existing methods that apply post hoc corrections, \eg, by applying a noising-denoising scheme after generation, our mitigation strategy operates seamlessly within the existing diffusion process. Extensive experiments demonstrate that our proposed approach effectively reduces artifacts across diverse domains, matching or surpassing existing supervised methods without additional training.

Multi-agent Large Language Model (LLM) systems have emerged as powerful architectures for complex task decomposition and collaborative problem-solving. However, their long-term behavioral stability remains largely unexamined. This study introduces the concept of agent drift, defined as the progressive degradation of agent behavior, decision quality, and inter-agent coherence over extended interaction sequences. We present a comprehensive theoretical framework for understanding drift phenomena, proposing three distinct manifestations: semantic drift (progressive deviation from original intent), coordination drift (breakdown in multi-agent consensus mechanisms), and behavioral drift (emergence of unintended strategies). We introduce the Agent Stability Index (ASI), a novel composite metric framework for quantifying drift across twelve dimensions, including response consistency, tool usage patterns, reasoning pathway stability, and inter-agent agreement rates. Through simulation-based analysis and theoretical modeling, we demonstrate how unchecked agent drift can lead to substantial reductions in task completion accuracy and increased human intervention requirements. We propose three mitigation strategies: episodic memory consolidation, drift-aware routing protocols, and adaptive behavioral anchoring. Theoretical analysis suggests these approaches can significantly reduce drift-related errors while maintaining system throughput. This work establishes a foundational methodology for monitoring, measuring, and mitigating agent drift in production agentic AI systems, with direct implications for enterprise deployment reliability and AI safety research.

Real-world datasets often exhibit temporal dynamics characterized by evolving data distributions. Disregarding this phenomenon, commonly referred to as concept drift, can significantly diminish a model's predictive accuracy. Furthermore, the presence of hyperparameters in online models exacerbates this issue. These parameters are typically fixed and cannot be dynamically adjusted by the user in response to the evolving data distribution. Gaussian Process (GP) models offer powerful non-parametric regression capabilities with uncertainty quantification, making them ideal for modeling complex data relationships in an online setting. However, conventional online GP methods face several critical limitations, including a lack of drift-awareness, reliance on fixed hyperparameters, vulnerability to data snooping, absence of a principled decay mechanism, and memory inefficiencies. In response, we propose DAO-GP (Drift-Aware Online Gaussian Process), a novel, fully adaptive, hyperparameter-free, decayed, and sparse non-linear regression model. DAO-GP features a built-in drift detection and adaptation mechanism that dynamically adjusts model behavior based on the severity of drift. Extensive empirical evaluations confirm DAO-GP's robustness across stationary conditions, diverse drift types (abrupt, incremental, gradual), and varied data characteristics. Analyses demonstrate its dynamic adaptation, efficient in-memory and decay-based management, and evolving inducing points. Compared with state-of-the-art parametric and non-parametric models, DAO-GP consistently achieves superior or competitive performance, establishing it as a drift-resilient solution for online non-linear regression.

Large language models are increasingly deployed in multi-turn interactive settings where users or environments can iteratively provide lightweight feedback. Unfortunately, optimizing such behavior presents a sharp dilemma in practice: online reinforcement learning is able to effectively address multi-turn dynamics but is prohibitively expensive due to the cost of generating full correction trajectories at every update, whereas offline supervised fine-tuning (SFT) is efficient but suffers from distribution shift and behavioral collapse. To this end, we novelly propose DRIFT (Decoupled Rollouts and Importance-Weighted Fine-Tuning), a framework that operationalizes the theoretical insight that the KL-regularized RL objective is equivalent to importance-weighted supervised learning. DRIFT decouples rollout from optimization by sampling offline interaction trajectories from a fixed reference policy, deriving return-based importance weights, and optimizing the policy via weighted SFT on the resulting dataset. Empirically, we demonstrate that DRIFT matches or exceeds the performance of multi-turn reinforcement learning baselines while maintaining the training efficiency and simplicity of standard supervised fine-tuning. Code is available at https://github.com/2020-qqtcg/DRIFT.

Diffusion models achieve state-of-the-art performance but often fail to generate outputs that align with human preferences and intentions, resulting in images with poor aesthetic quality and semantic inconsistencies. Existing alignment methods present a difficult trade-off: fine-tuning approaches suffer from loss of diversity with reward over-optimization, while test-time scaling methods introduce significant computational overhead and tend to under-optimize. To address these limitations, we propose HyperAlign, a novel framework that trains a hypernetwork for efficient and effective test-time alignment. Instead of modifying latent states, HyperAlign dynamically generates low-rank adaptation weights to modulate the diffusion model's generation operators. This allows the denoising trajectory to be adaptively adjusted based on input latents, timesteps and prompts for reward-conditioned alignment. We introduce multiple variants of HyperAlign that differ in how frequently the hypernetwork is applied, balancing between performance and efficiency. Furthermore, we optimize the hypernetwork using a reward score objective regularized with preference data to reduce reward hacking. We evaluate HyperAlign on multiple extended generative paradigms, including Stable Diffusion and FLUX. It significantly outperforms existing fine-tuning and test-time scaling baselines in enhancing semantic consistency and visual appeal.

Flow matching with clean-data prediction has shown that regressing the clean point can exploit low-dimensional structure more effectively than predicting an ambient noised quantity. We ask whether this principle remains useful after images are mapped into a learned latent space, where compression has already removed much of the raw pixel variability. We introduce JLT, a 130M latent diffusion Transformer over frozen FLUX.2 VAE codes, and compare clean-latent prediction with a matched velocity-prediction DiT under the same representation, backbone, and training settings. Although the three variables x, epsilon, and v are linearly convertible for a fixed corruption time, a local Gaussian analysis shows that velocity regression inherits an isotropic target-covariance floor and amplifies low-variance latent directions, while clean prediction damps them. On ImageNet 256 x 256, JLT-B/1 obtains FID-50K 2.50 with classifier-free guidance, with a large matched-target gap over velocity prediction. These results suggest that prediction targets in latent diffusion are representation-dependent geometric choices, rather than interchangeable algebraic parameterizations.

Latent Diffusion Models (LDMs) capture the dynamic evolution of latent variables over time, blending patterns and multimodality in a generative system. Despite the proficiency of LDM in various applications, such as text-to-image generation, facilitated by robust text encoders and a variational autoencoder, the critical need to deploy large generative models on edge devices compels a search for more compact yet effective alternatives. Post Training Quantization (PTQ), a method to compress the operational size of deep learning models, encounters challenges when applied to LDM due to temporal and structural complexities. This study proposes a quantization strategy that efficiently quantize LDMs, leveraging Signal-to-Quantization-Noise Ratio (SQNR) as a pivotal metric for evaluation. By treating the quantization discrepancy as relative noise and identifying sensitive part(s) of a model, we propose an efficient quantization approach encompassing both global and local strategies. The global quantization process mitigates relative quantization noise by initiating higher-precision quantization on sensitive blocks, while local treatments address specific challenges in quantization-sensitive and time-sensitive modules. The outcomes of our experiments reveal that the implementation of both global and local treatments yields a highly efficient and effective Post Training Quantization (PTQ) of LDMs.

We present a video generation model that accurately reproduces object motion, changes in camera viewpoint, and new content that arises over time. Existing video generation methods often fail to produce new content as a function of time while maintaining consistencies expected in real environments, such as plausible dynamics and object persistence. A common failure case is for content to never change due to over-reliance on inductive biases to provide temporal consistency, such as a single latent code that dictates content for the entire video. On the other extreme, without long-term consistency, generated videos may morph unrealistically between different scenes. To address these limitations, we prioritize the time axis by redesigning the temporal latent representation and learning long-term consistency from data by training on longer videos. To this end, we leverage a two-phase training strategy, where we separately train using longer videos at a low resolution and shorter videos at a high resolution. To evaluate the capabilities of our model, we introduce two new benchmark datasets with explicit focus on long-term temporal dynamics.

Predicting the behavior of complex systems is critical in many scientific and engineering domains, and hinges on the model's ability to capture their underlying dynamics. Existing methods encode the intrinsic dynamics of high-dimensional observations through latent representations and predict autoregressively. However, these latent representations lose the inherent spatial structure of spatiotemporal dynamics, leading to the predictor's inability to effectively model spatial interactions and neglect emerging dynamics during long-term prediction. In this work, we propose SparseDiff, introducing a test-time adaptation strategy to dynamically update the encoding scheme to accommodate emergent spatiotemporal structures during the long-term evolution of the system. Specifically, we first design a codebook-based sparse encoder, which coarsens the continuous spatial domain into a sparse graph topology. Then, we employ a graph neural ordinary differential equation to model the dynamics and guide a diffusion decoder for reconstruction. SparseDiff autoregressively predicts the spatiotemporal evolution and adjust the sparse topological structure to adapt to emergent spatiotemporal patterns by adaptive re-encoding. Extensive evaluations on representative systems demonstrate that SparseDiff achieves an average prediction error reduction of 49.99\% compared to baselines, requiring only 1\% of the spatial resolution.

Large-scale recordings of neural activity are providing new opportunities to study neural population dynamics. A powerful method for analyzing such high-dimensional measurements is to deploy an algorithm to learn the low-dimensional latent dynamics. LFADS (Latent Factor Analysis via Dynamical Systems) is a deep learning method for inferring latent dynamics from high-dimensional neural spiking data recorded simultaneously in single trials. This method has shown a remarkable performance in modeling complex brain signals with an average inference latency in milliseconds. As our capacity of simultaneously recording many neurons is increasing exponentially, it is becoming crucial to build capacity for deploying low-latency inference of the computing algorithms. To improve the real-time processing ability of LFADS, we introduce an efficient implementation of the LFADS models onto Field Programmable Gate Arrays (FPGA). Our implementation shows an inference latency of 41.97 mus for processing the data in a single trial on a Xilinx U55C.

Machine learning systems in fraud detection, credit scoring, and clinical risk assessment operate under delayed ground truth: outcome labels arrive days to months after the decision they evaluate. During this blind period, governance evidence degrades through mechanisms that neither drift detection methods nor governance frameworks adequately address. This paper formalizes an evidence sufficiency model with four dimensions (completeness, freshness, reliability, representativeness) and a decision-readiness gate that quantifies how label latency degrades evidence quality. The model maps three drift types to dimension-specific degradation trajectories. A complementary proxy indicator framework comprising seven measurement categories estimates sufficiency degradation without labels, with explicit coverage mapping and characterized blind spots per drift type. Evaluation on the IEEE-CIS Fraud Detection dataset (~590K transactions) with controlled drift injection shows that composite proxy monitoring detects covariate and mixed drift with 100% detection rate, while concept drift without feature change remains undetected -- consistent with the theoretical impossibility of unsupervised detection when P(X) is unchanged. Blind period simulation confirms monotone sufficiency degradation, with concept drift degrading fastest (S=0.242 at day 60 vs 0.418 for no-drift). The framework contributes a governance sufficiency monitoring instrument; its value lies in translating drift signals into auditable sufficiency assessments with characterized blind spots. Mapping sufficiency levels to governance actions requires deployment-specific calibration beyond this study's scope.

While diffusion models excel at generating high-quality samples, their latent variables typically lack semantic meaning and are not suitable for representation learning. Here, we propose InfoDiffusion, an algorithm that augments diffusion models with low-dimensional latent variables that capture high-level factors of variation in the data. InfoDiffusion relies on a learning objective regularized with the mutual information between observed and hidden variables, which improves latent space quality and prevents the latents from being ignored by expressive diffusion-based decoders. Empirically, we find that InfoDiffusion learns disentangled and human-interpretable latent representations that are competitive with state-of-the-art generative and contrastive methods, while retaining the high sample quality of diffusion models. Our method enables manipulating the attributes of generated images and has the potential to assist tasks that require exploring a learned latent space to generate quality samples, e.g., generative design.

Latent diffusion models (LDMs) have made significant advancements in the field of image generation in recent years. One major advantage of LDMs is their ability to operate in a compressed latent space, allowing for more efficient training and deployment. However, despite these advantages, challenges with LDMs still remain. For example, it has been observed that LDMs often generate high-frequency details and complex compositions imperfectly. We hypothesize that one reason for these flaws is due to the fact that all pre- and post-training of LDMs are done in latent space, which is typically 8 times 8 lower spatial-resolution than the output images. To address this issue, we propose adding pixel-space supervision in the post-training process to better preserve high-frequency details. Experimentally, we show that adding a pixel-space objective significantly improves both supervised quality fine-tuning and preference-based post-training by a large margin on a state-of-the-art DiT transformer and U-Net diffusion models in both visual quality and visual flaw metrics, while maintaining the same text alignment quality.

Recent autoregressive video diffusion methods are increasingly built upon Self Forcing, where the student is trained on histories produced by its own rollout rather than ground-truth video contexts. This reduces exposure bias, but the historical key-value cache is still used by future frames only as frozen rollout state. As a result, future losses cannot supervise how earlier generated latents should be written into more useful keys and values for later video-latent generation. We call this the historical context-gradient gap. We propose Self Gradient Forcing (SGF), a two-pass training strategy that restores this missing supervision signal without backpropagating through the full serial rollout. Pass 1 performs a no-gradient autoregressive rollout matching inference and, at a sampled denoising exit step, records both the self-generated context and the noisy latents fed to the model. Pass 2 performs parallel context-gradient reconstruction for the recorded exit step. The generated context is used as stop-gradient clean-latent input, while the model recomputes the context KV representations and future-to-context causal attention. Thus, SGF provides the missing memory-writing supervision within the native autoregressive training objective, using losses on future video latents to train the model to encode context into more effective causal memory. Across extensive long-horizon frame-wise and chunk-wise experiments under different initializations, SGF achieves stronger native long-video extrapolation than Self Forcing, especially in subject identity, background/layout consistency, and temporal stability. Remarkably, using only a 5-second training window, SGF can extrapolate to videos lasting several minutes. Code and models will be released to advance research on autoregressive video generation.

Offline reinforcement learning (RL) holds promise as a means to learn high-reward policies from a static dataset, without the need for further environment interactions. However, a key challenge in offline RL lies in effectively stitching portions of suboptimal trajectories from the static dataset while avoiding extrapolation errors arising due to a lack of support in the dataset. Existing approaches use conservative methods that are tricky to tune and struggle with multi-modal data (as we show) or rely on noisy Monte Carlo return-to-go samples for reward conditioning. In this work, we propose a novel approach that leverages the expressiveness of latent diffusion to model in-support trajectory sequences as compressed latent skills. This facilitates learning a Q-function while avoiding extrapolation error via batch-constraining. The latent space is also expressive and gracefully copes with multi-modal data. We show that the learned temporally-abstract latent space encodes richer task-specific information for offline RL tasks as compared to raw state-actions. This improves credit assignment and facilitates faster reward propagation during Q-learning. Our method demonstrates state-of-the-art performance on the D4RL benchmarks, particularly excelling in long-horizon, sparse-reward tasks.

Diffusion Language Models (DLMs) have recently emerged as a promising alternative to autoregressive models. Unlike standard diffusion-based approaches, DLMs are not explicitly conditioned on a timestep, raising a natural question: do these models internally represent denoising progress, and how is such information used downstream? In this work, we show that DLMs do in fact encode a latent representation related to the diffusion timestep within their residual streams. We find that this signal can be reliably extracted using probes across layers, indicating that denoising progress is decodable from internal activations. We further demonstrate that steering the model along a low-dimensional subspace associated with the inferred timestep allows us to systematically modulate its notion of denoising progress, leading to predictable changes in model confidence and entropy. Finally, we analyse the geometry of the identified representation, showing that it exhibits structured and interpretable properties in activation space, and shedding light on how such a signal is processed by these models.

We present a novel approach for generating minority samples that live on low-density regions of a data manifold. Our framework is built upon diffusion models, leveraging the principle of guided sampling that incorporates an arbitrary energy-based guidance during inference time. The key defining feature of our sampler lies in its self-contained nature, \ie, implementable solely with a pretrained model. This distinguishes our sampler from existing techniques that require expensive additional components (like external classifiers) for minority generation. Specifically, we first estimate the likelihood of features within an intermediate latent sample by evaluating a reconstruction loss w.r.t. its posterior mean. The generation then proceeds with the minimization of the estimated likelihood, thereby encouraging the emergence of minority features in the latent samples of subsequent timesteps. To further improve the performance of our sampler, we provide several time-scheduling techniques that properly manage the influence of guidance over inference steps. Experiments on benchmark real datasets demonstrate that our approach can greatly improve the capability of creating realistic low-likelihood minority instances over the existing techniques without the reliance on costly additional elements. Code is available at https://github.com/soobin-um/sg-minority.

The Latent Stochastic Differential Equation (SDE) is a powerful tool for time series and sequence modeling. However, training Latent SDEs typically relies on adjoint sensitivity methods, which depend on simulation and backpropagation through approximate SDE solutions, which limit scalability. In this work, we propose SDE Matching, a new simulation-free method for training Latent SDEs. Inspired by modern Score- and Flow Matching algorithms for learning generative dynamics, we extend these ideas to the domain of stochastic dynamics for time series and sequence modeling, eliminating the need for costly numerical simulations. Our results demonstrate that SDE Matching achieves performance comparable to adjoint sensitivity methods while drastically reducing computational complexity.

End-to-end reinforcement learning can improve the accuracy of compound LLM systems, but it does not constrain how modules divide labor internally. We identify Role Drift, a failure mode in which modules preserve or improve end-task performance while deviating from their assigned roles through role-violating shortcuts that remain invisible to system-level evaluation. To make role drift observable and controllable, we propose Role Anchor, a regularizer that modulates how much each module deviates from its assigned role during end-to-end training. The key idea is to preserve how the role prompt shifts the module's next-token predictions relative to a neutral prompt, which serves as a proxy for the role's intended effect during training. Experiments on two compound LLM pipelines reveal role drift that accuracy alone fails to detect: a decomposer meant to split a question into sub-questions for a separate solver instead plants the answer in them, and a reader meant to answer from retrieved passages instead falls back on parametric memory. In fact, on the decomposer pipeline this shortcut drives most of the apparent RL gain: 86% of it vanishes once the decomposer is held to its role, indicating that terminal accuracy alone can badly overstate how much a compound system has genuinely learned. Across both pipelines, Role Anchor mitigates role drift at a tunable accuracy cost that varies by pipeline and anchor strength. Additional gradient analysis suggests that the regularizer reduces alignment with the role-drift direction rather than simply suppressing learning.

Large-scale traffic forecasting relies on fixed sensor networks that often exhibit blackouts: contiguous intervals of missing measurements caused by detector or communication failures. These outages are typically handled under a Missing At Random (MAR) assumption, even though blackout events may correlate with unobserved traffic conditions (e.g., congestion or anomalous flow), motivating a Missing Not At Random (MNAR) treatment. We propose a latent state-space framework that jointly models (i) traffic dynamics via a linear dynamical system and (ii) sensor dropout via a Bernoulli observation channel whose probability depends on the latent traffic state. Inference uses an Extended Kalman Filter with Rauch-Tung-Striebel smoothing, and parameters are learned via an approximate EM procedure with a dedicated update for detector-specific missingness parameters. On the Seattle inductive loop detector data, introducing latent dynamics yields large gains over naive baselines, reducing blackout imputation RMSE from 7.02 (LOCF) and 5.02 (linear interpolation + seasonal naive) to 4.23 (MAR LDS), corresponding to about a 64% reduction in MSE relative to LOCF. Explicit MNAR modeling provides a consistent but smaller additional improvement on real data (imputation RMSE 4.20; 0.8% RMSE reduction relative to MAR), with similar modest gains for short-horizon post-blackout forecasts (evaluated at 1, 3, and 6 steps). In controlled synthetic experiments, the MNAR advantage increases as the true missingness dependence on latent state strengthens. Overall, temporal dynamics dominate performance, while MNAR modeling offers a principled refinement that becomes most valuable when missingness is genuinely informative.

Adapting to concept drift is a challenging task in machine learning, which is usually tackled using incremental learning techniques that periodically re-fit a learning model leveraging newly available data. A primary limitation of these techniques is their reliance on substantial amounts of data for retraining. The necessity of acquiring fresh data introduces temporal delays prior to retraining, potentially rendering the models inaccurate if a sudden concept drift occurs in-between two consecutive retrainings. In communication networks, such issue emerges when performing traffic forecasting following a~failure event: post-failure re-routing may induce a drastic shift in distribution and pattern of traffic data, thus requiring a timely model adaptation. In this work, we address this challenge for the problem of traffic forecasting and propose an approach that exploits adaptive learning algorithms, namely, liquid neural networks, which are capable of self-adaptation to abrupt changes in data patterns without requiring any retraining. Through extensive simulations of failure scenarios, we compare the predictive performance of our proposed approach to that of a reference method based on incremental learning. Experimental results show that our proposed approach outperforms incremental learning-based methods in situations where the shifts in traffic patterns are drastic.

We study inference-time scaling for diffusion models, where the goal is to adapt a pre-trained model to new target distributions without retraining. Existing guidance-based methods are simple but introduce bias, while particle-based corrections suffer from weight degeneracy and high computational cost. We introduce DriftLite, a lightweight, training-free particle-based approach that steers the inference dynamics on the fly with provably optimal stability control. DriftLite exploits a previously unexplored degree of freedom in the Fokker-Planck equation between the drift and particle potential, and yields two practical instantiations: Variance- and Energy-Controlling Guidance (VCG/ECG) for approximating the optimal drift with minimal overhead. Across Gaussian mixture models, particle systems, and large-scale protein-ligand co-folding problems, DriftLite consistently reduces variance and improves sample quality over pure guidance and sequential Monte Carlo baselines. These results highlight a principled, efficient route toward scalable inference-time adaptation of diffusion models.

Diffusion models have been widely adopted in image generation, producing higher-quality and more diverse samples than generative adversarial networks (GANs). We introduce a latent diffusion model (LDM) for precipitation nowcasting - short-term forecasting based on the latest observational data. The LDM is more stable and requires less computation to train than GANs, albeit with more computationally expensive generation. We benchmark it against the GAN-based Deep Generative Models of Rainfall (DGMR) and a statistical model, PySTEPS. The LDM produces more accurate precipitation predictions, while the comparisons are more mixed when predicting whether the precipitation exceeds predefined thresholds. The clearest advantage of the LDM is that it generates more diverse predictions than DGMR or PySTEPS. Rank distribution tests indicate that the distribution of samples from the LDM accurately reflects the uncertainty of the predictions. Thus, LDMs are promising for any applications where uncertainty quantification is important, such as weather and climate.

Three key properties that are desired of trustworthy machine learning models deployed in high-stakes environments are fairness, explainability, and an ability to account for various kinds of "drift". While drifts in model accuracy, for example due to covariate shift, have been widely investigated, drifts in fairness metrics over time remain largely unexplored. In this paper, we propose FEAMOE, a novel "mixture-of-experts" inspired framework aimed at learning fairer, more explainable/interpretable models that can also rapidly adjust to drifts in both the accuracy and the fairness of a classifier. We illustrate our framework for three popular fairness measures and demonstrate how drift can be handled with respect to these fairness constraints. Experiments on multiple datasets show that our framework as applied to a mixture of linear experts is able to perform comparably to neural networks in terms of accuracy while producing fairer models. We then use the large-scale HMDA dataset and show that while various models trained on HMDA demonstrate drift with respect to both accuracy and fairness, FEAMOE can ably handle these drifts with respect to all the considered fairness measures and maintain model accuracy as well. We also prove that the proposed framework allows for producing fast Shapley value explanations, which makes computationally efficient feature attribution based explanations of model decisions readily available via FEAMOE.

Recent work in Video Frame Interpolation (VFI) tries to formulate VFI as a diffusion-based conditional image generation problem, synthesizing the intermediate frame given a random noise and neighboring frames. Due to the relatively high resolution of videos, Latent Diffusion Models (LDMs) are employed as the conditional generation model, where the autoencoder compresses images into latent representations for diffusion and then reconstructs images from these latent representations. Such a formulation poses a crucial challenge: VFI expects that the output is deterministically equal to the ground truth intermediate frame, but LDMs randomly generate a diverse set of different images when the model runs multiple times. The reason for the diverse generation is that the cumulative variance (variance accumulated at each step of generation) of generated latent representations in LDMs is large. This makes the sampling trajectory random, resulting in diverse rather than deterministic generations. To address this problem, we propose our unique solution: Frame Interpolation with Consecutive Brownian Bridge Diffusion. Specifically, we propose consecutive Brownian Bridge diffusion that takes a deterministic initial value as input, resulting in a much smaller cumulative variance of generated latent representations. Our experiments suggest that our method can improve together with the improvement of the autoencoder and achieve state-of-the-art performance in VFI, leaving strong potential for further enhancement.

Diffusion models do not recover semantic structure uniformly over time. Instead, samples transition from semantic ambiguity to class commitment within a narrow regime. Recent theoretical work attributes this transition to dynamical instabilities along class-separating directions, but practical methods to detect and exploit these windows in trained models are still limited. We show that tracking the class-conditional entropy of a latent semantic variable given the noisy state provides a reliable signature of these transition regimes. By restricting the entropy to semantic partitions, the entropy can furthermore resolve semantic decisions at different levels of abstraction. We analyze this behavior in high-dimensional Gaussian mixture models and show that the entropy rate concentrates on the same logarithmic time scale as the speciation symmetry-breaking instability previously identified in variance-preserving diffusion. We validate our method on EDM2-XS and Stable Diffusion 1.5, where class-conditional entropy consistently isolates the noise regimes critical for semantic structure formation. Finally, we use our framework to quantify how guidance redistributes semantic information over time. Together, these results connect information-theoretic and statistical physics perspectives on diffusion and provide a principled basis for time-localized control.

While diffusion models excel at generating high-quality images from text prompts, they struggle with visual consistency when generating image sequences. Existing methods generate each image independently, leading to disjointed narratives - a challenge further exacerbated in non-linear storytelling, where scenes must connect beyond adjacent images. We introduce a novel beam search strategy for latent space exploration, enabling conditional generation of full image sequences with beam search decoding. In contrast to earlier methods that rely on fixed latent priors, our method dynamically samples past latents to search for an optimal sequence of latent representations, ensuring coherent visual transitions. As the latent denoising space is explored, the beam search graph is pruned with a cross-attention mechanism that efficiently scores search paths, prioritizing alignment with both textual prompts and visual context. Human and automatic evaluations confirm that BeamDiffusion outperforms other baseline methods, producing full sequences with superior coherence, visual continuity, and textual alignment.

Reasoning models improve their problem-solving ability through inference-time scaling, allocating more compute via longer token budgets. Identifying which reasoning traces are likely to succeed remains a key opportunity: reliably predicting productive paths can substantially reduce wasted computation and improve overall efficiency. We introduce Latent-Trajectory signals that characterize the temporal evolution of a model's internal representations during the generation of intermediate reasoning tokens. By measuring the overall change in latent representations between the start and end of reasoning, the change accumulated across intermediate steps, and the extent to which these changes advance toward the final state, we show that these signals predict solution accuracy more reliably than both cross-layer metrics and output-based confidence measures. When used to guide answer selection across multiple sampled generations, Latent-Trajectory signals make test-time scaling more effective and efficient than majority voting, reducing token usage by up to 70% while preserving and even improving accuracy by 2.6% on average. Moreover, these predictive signals often emerge early in the reasoning trace, enabling early selection and allocation of compute to the most promising candidates. Our findings contribute not only practical strategies for inference-time efficiency, but also a deeper interpretability perspective on how reasoning processes are represented and differentiated in latent space.

Consistent 3D geometry estimation from streaming RGB input is crucial for real-world applications such as autonomous driving, embodied AI, and large-scale reconstruction. While modern monocular geometry foundation models achieve strong single-image accuracy, they exhibit severe temporal inconsistency on continuous input, notably dominated by scale--shift drifting. Through targeted empirical analysis, we trace this instability to its root cause: fluctuations in latent feature statistics, whose mean and variance directly determine the predicted depth's scale and shift. Building on this insight, we introduce Dynamic Feature Normalization (DyFN), a lightweight, causal recurrent module that dynamically and robustly modulates feature statistics to maintain stable geometry over time. We adapt powerful pretrained monocular geometry models for streaming by finetuning only DyFN, a mere 2\% additional parameters, while keeping the backbone frozen, thereby achieving temporal consistency without compromising single-image accuracy. Extensive experiments across four benchmarks show that DyFN effectively eliminates temporal artifacts such as disjointed layering and positional jitter, and achieves state-of-the-art temporal stability, improving over prior streaming methods by up to 14\% and even outperforming heavier non-causal video baselines. Project Page: https://shawlyu.github.io/DyFN

Current frontier video diffusion models have demonstrated remarkable results at generating high-quality videos. However, they can only generate short video clips, normally around 10 seconds or 240 frames, due to computation limitations during training. In this work, we show that existing models can be naturally extended to autoregressive video diffusion models without changing the architectures. Our key idea is to assign the latent frames with progressively increasing noise levels rather than a single noise level, which allows for fine-grained condition among the latents and large overlaps between the attention windows. Such progressive video denoising allows our models to autoregressively generate video frames without quality degradation or abrupt scene changes. We present state-of-the-art results on long video generation at 1 minute (1440 frames at 24 FPS). Videos from this paper are available at https://desaixie.github.io/pa-vdm/.

In this work, we introduce Brain Latent Progression (BrLP), a novel spatiotemporal disease progression model based on latent diffusion. BrLP is designed to predict the evolution of diseases at the individual level on 3D brain MRIs. Existing deep generative models developed for this task are primarily data-driven and face challenges in learning disease progressions. BrLP addresses these challenges by incorporating prior knowledge from disease models to enhance the accuracy of predictions. To implement this, we propose to integrate an auxiliary model that infers volumetric changes in various brain regions. Additionally, we introduce Latent Average Stabilization (LAS), a novel technique to improve spatiotemporal consistency of the predicted progression. BrLP is trained and evaluated on a large dataset comprising 11,730 T1-weighted brain MRIs from 2,805 subjects, collected from three publicly available, longitudinal Alzheimer's Disease (AD) studies. In our experiments, we compare the MRI scans generated by BrLP with the actual follow-up MRIs available from the subjects, in both cross-sectional and longitudinal settings. BrLP demonstrates significant improvements over existing methods, with an increase of 22% in volumetric accuracy across AD-related brain regions and 43% in image similarity to the ground-truth scans. The ability of BrLP to generate conditioned 3D scans at the subject level, along with the novelty of integrating prior knowledge to enhance accuracy, represents a significant advancement in disease progression modeling, opening new avenues for precision medicine. The code of BrLP is available at the following link: https://github.com/LemuelPuglisi/BrLP.

Diffusion models have achieved great success in modeling continuous data modalities such as images, audio, and video, but have seen limited use in discrete domains such as language. Recent attempts to adapt diffusion to language have presented diffusion as an alternative to autoregressive language generation. We instead view diffusion as a complementary method that can augment the generative capabilities of existing pre-trained language models. We demonstrate that continuous diffusion models can be learned in the latent space of a pre-trained encoder-decoder model, enabling us to sample continuous latent representations that can be decoded into natural language with the pre-trained decoder. We show that our latent diffusion models are more effective at sampling novel text from data distributions than a strong autoregressive baseline and also enable controllable generation.

Latent diffusion models excel at generating high-quality images but lose the benefits of end-to-end modeling. They discard information during image encoding, require a separately trained decoder, and model an auxiliary distribution to the raw data. In this paper, we propose Latent Forcing, a simple modification to existing architectures that achieves the efficiency of latent diffusion while operating on raw natural images. Our approach orders the denoising trajectory by jointly processing latents and pixels with separately tuned noise schedules. This allows the latents to act as a scratchpad for intermediate computation before high-frequency pixel features are generated. We find that the order of conditioning signals is critical, and we analyze this to explain differences between REPA distillation in the tokenizer and the diffusion model, conditional versus unconditional generation, and how tokenizer reconstruction quality relates to diffusability. Applied to ImageNet, Latent Forcing achieves a new state-of-the-art for diffusion transformer-based pixel generation at our compute scale.

Latent diffusion models (LDMs) power state-of-the-art high-resolution generative image models. LDMs learn the data distribution in the latent space of an autoencoder (AE) and produce images by mapping the generated latents into RGB image space using the AE decoder. While this approach allows for efficient model training and sampling, it induces a disconnect between the training of the diffusion model and the decoder, resulting in a loss of detail in the generated images. To remediate this disconnect, we propose to leverage the internal features of the decoder to define a latent perceptual loss (LPL). This loss encourages the models to create sharper and more realistic images. Our loss can be seamlessly integrated with common autoencoders used in latent diffusion models, and can be applied to different generative modeling paradigms such as DDPM with epsilon and velocity prediction, as well as flow matching. Extensive experiments with models trained on three datasets at 256 and 512 resolution show improved quantitative -- with boosts between 6% and 20% in FID -- and qualitative results when using our perceptual loss.

Neural populations exhibit latent dynamical structures that drive time-evolving spiking activities, motivating the search for models that capture both intrinsic network dynamics and external unobserved influences. In this work, we introduce LangevinFlow, a sequential Variational Auto-Encoder where the time evolution of latent variables is governed by the underdamped Langevin equation. Our approach incorporates physical priors -- such as inertia, damping, a learned potential function, and stochastic forces -- to represent both autonomous and non-autonomous processes in neural systems. Crucially, the potential function is parameterized as a network of locally coupled oscillators, biasing the model toward oscillatory and flow-like behaviors observed in biological neural populations. Our model features a recurrent encoder, a one-layer Transformer decoder, and Langevin dynamics in the latent space. Empirically, our method outperforms state-of-the-art baselines on synthetic neural populations generated by a Lorenz attractor, closely matching ground-truth firing rates. On the Neural Latents Benchmark (NLB), the model achieves superior held-out neuron likelihoods (bits per spike) and forward prediction accuracy across four challenging datasets. It also matches or surpasses alternative methods in decoding behavioral metrics such as hand velocity. Overall, this work introduces a flexible, physics-inspired, high-performing framework for modeling complex neural population dynamics and their unobserved influences.

We present LayerDiffusion, an approach enabling large-scale pretrained latent diffusion models to generate transparent images. The method allows generation of single transparent images or of multiple transparent layers. The method learns a "latent transparency" that encodes alpha channel transparency into the latent manifold of a pretrained latent diffusion model. It preserves the production-ready quality of the large diffusion model by regulating the added transparency as a latent offset with minimal changes to the original latent distribution of the pretrained model. In this way, any latent diffusion model can be converted into a transparent image generator by finetuning it with the adjusted latent space. We train the model with 1M transparent image layer pairs collected using a human-in-the-loop collection scheme. We show that latent transparency can be applied to different open source image generators, or be adapted to various conditional control systems to achieve applications like foreground/background-conditioned layer generation, joint layer generation, structural control of layer contents, etc. A user study finds that in most cases (97%) users prefer our natively generated transparent content over previous ad-hoc solutions such as generating and then matting. Users also report the quality of our generated transparent images is comparable to real commercial transparent assets like Adobe Stock.

Most practical high-resolution text-to-image systems, including latent diffusion and autoregressive models, perform generation in a compact latent space, and a decoder maps the generated latents back to pixels. Yet the latent-to-pixel decoder is reconstruction-oriented, optimized to invert the encoder rather than synthesize more details, and becomes increasingly costly at megapixel scale. This drawback calls for a more expressive and efficient decoding paradigm. Motivated by recent progress in scalable pixel-space diffusion, we introduce PiD, a Pixel diffusion Decoder that reformulates latent decoding as conditional pixel diffusion, unifying decoding and upsampling into one generative module. By denoising directly in high-resolution pixel space, PiD synthesizes 4times and even 8times upscaled images with low latency. For latent conditioning, a lightweight sigma-aware adapter injects noise-corrupted latents into the pixel diffusion backbone, enabling PiD to decode partially denoised latents and terminate the latent diffusion process early. To further improve efficiency, we distill the model using DMD2, reducing inference to just 4 steps. PiD applies to both conventional VAE latents and semantic latents (e.g., SigLIP, DINOv2) used in recent RAE-based models. PiD decodes latents of 512 times 512 images into 2048 times 2048 pixels in under 1 second with 13 GB peak memory on a consumer RTX 5090, and as fast as 210 ms on a GB200 GPU, about 6times faster than cascaded diffusion-based super-resolution pipelines with better visual fidelity.

Prior work on a social web highlighter located individuality in selection -- which documents a person chooses to highlight -- but measured it cross-sectionally. We ask the temporal question: is a reader's selection signature a trait or a state? We freeze each reader's first six months of highlighting as a profile and track its own-vs-other advantage on their later selections at growing gaps (to 24+ months), with negatives drawn from the same calendar era -- so supply drift cannot masquerade as personal drift -- at a coarse global level and at a fine level whose negatives and controls come from the reader's own interest neighborhood; the anchor cell reproduces the prior cross-sectional level (+0.188 vs +0.169), validating the harness. Four results. Within the same users, the fine-layer advantage shows no statistically detectable paired decline at any horizon (6-12 month retention R = 1.00 [0.85, 1.18], n = 212; the farthest bin is compatible with a modest decline; the only contrast whose interval excludes zero is the coarse layer at 12-24 months, about 13%). The signal is not reducible to repeated domains (~90% survives excluding all profile sources). Within-person drift is slow (a recent-half profile beats the old half by +0.042). Prospectively, personal profiles -- even one built from a reader's earliest documents, median 20 months before evaluation -- rank their next reads at roughly 3x the AP of every simple non-personal prior tested. We use "trait" operationally (a stable signature under continued engagement); the scope is heavy, long-tenured readers of one platform, and exposure is not separable from choice.

Recently, diffusion models have been widely adopted in generative modeling and have served as foundational models for many image generation tasks. To control the generation without costly re-training or fine-tuning, many works seek inference-time guidance methods to steer the latent via a differentiable objective at inference time. However, these methods cannot effectively preserve the original Gaussian distribution because they introduce distributional drift, thereby degrading the sample quality. To address this gap, we propose DiffRGD, a distribution-aware guidance framework that explicitly preserves the latent Gaussian structure. DiffRGD formulates each sampling step as a constrained optimization problem on a spherical manifold induced by the latent Gaussian distribution, and solves it efficiently via Riemannian Gradient Descent (RGD). DiffRGD is a plug-and-play method that can be seamlessly integrated into any pre-trained diffusion model. Extensive experiments demonstrate that DiffRGD outperforms previous methods in most image restoration and conditional generation tasks. Our project page is available at https://diffrgd.github.io/.

Math reasoning has become the poster child of progress in large language models (LLMs), with new models rapidly surpassing human-level performance on benchmarks like MATH and AIME. But as math leaderboards improve week by week, it is worth asking: do these gains reflect broader problem-solving ability or just narrow overfitting? To answer this question, we evaluate over 20 open-weight reasoning-tuned models across a broad suite of tasks, including math, scientific QA, agent planning, coding, and standard instruction-following. We surprisingly find that most models that succeed in math fail to transfer their gains to other domains. To rigorously study this phenomenon, we conduct controlled experiments on Qwen3-14B models using math-only data but different tuning methods. We find that reinforcement learning (RL)-tuned models generalize well across domains, while supervised fine-tuning (SFT)-tuned models often forget general capabilities. Latent-space representation and token-space distribution shift analyses reveal that SFT induces substantial representation and output drift, while RL preserves general-domain structure. Our results suggest a need to rethink standard post-training recipes, particularly the reliance on SFT-distilled data for advancing reasoning models.

Data attribution methods trace model behavior back to its training dataset, offering an effective approach to better understand ''black-box'' neural networks. While prior research has established quantifiable links between model output and training data in diverse settings, interpreting diffusion model outputs in relation to training samples remains underexplored. In particular, diffusion models operate over a sequence of timesteps instead of instantaneous input-output relationships in previous contexts, posing a significant challenge to extend existing frameworks to diffusion models directly. Notably, we present Diffusion-TracIn that incorporates this temporal dynamics and observe that samples' loss gradient norms are highly dependent on timestep. This trend leads to a prominent bias in influence estimation, and is particularly noticeable for samples trained on large-norm-inducing timesteps, causing them to be generally influential. To mitigate this effect, we introduce Diffusion-ReTrac as a re-normalized adaptation that enables the retrieval of training samples more targeted to the test sample of interest, facilitating a localized measurement of influence and considerably more intuitive visualization. We demonstrate the efficacy of our approach through various evaluation metrics and auxiliary tasks, reducing the amount of generally influential samples to 1{3} of its original quantity.

Video diffusion models have recently made great progress in generation quality, but are still limited by the high memory and computational requirements. This is because current video diffusion models often attempt to process high-dimensional videos directly. To tackle this issue, we propose content-motion latent diffusion model (CMD), a novel efficient extension of pretrained image diffusion models for video generation. Specifically, we propose an autoencoder that succinctly encodes a video as a combination of a content frame (like an image) and a low-dimensional motion latent representation. The former represents the common content, and the latter represents the underlying motion in the video, respectively. We generate the content frame by fine-tuning a pretrained image diffusion model, and we generate the motion latent representation by training a new lightweight diffusion model. A key innovation here is the design of a compact latent space that can directly utilizes a pretrained image diffusion model, which has not been done in previous latent video diffusion models. This leads to considerably better quality generation and reduced computational costs. For instance, CMD can sample a video 7.7times faster than prior approaches by generating a video of 512times1024 resolution and length 16 in 3.1 seconds. Moreover, CMD achieves an FVD score of 212.7 on WebVid-10M, 27.3% better than the previous state-of-the-art of 292.4.

We present a straightforward statistical test to detect certain violations of the assumption that the data are Independent and Identically Distributed (IID). The specific form of violation considered is common across real-world applications: whether the examples are ordered in the dataset such that almost adjacent examples tend to have more similar feature values (e.g. due to distributional drift, or attractive interactions between datapoints). Based on a k-Nearest Neighbors estimate, our approach can be used to audit any multivariate numeric data as well as other data types (image, text, audio, etc.) that can be numerically represented, perhaps with model embeddings. Compared with existing methods to detect drift or auto-correlation, our approach is both applicable to more types of data and also able to detect a wider variety of IID violations in practice. Code: https://github.com/cleanlab/cleanlab

Latent Diffusion Models (LDMs) achieve high-fidelity synthesis but suffer from latent space brittleness, causing discontinuous semantic jumps during editing. We introduce a Riemannian framework to diagnose this instability by analyzing the generative Jacobian, decomposing geometry into Local Scaling (capacity) and Local Complexity (curvature). Our study uncovers a ``Geometric Decoupling": while curvature in normal generation functionally encodes image detail, OOD generation exhibits a functional decoupling where extreme curvature is wasted on unstable semantic boundaries rather than perceptible details. This geometric misallocation identifies ``Geometric Hotspots" as the structural root of instability, providing a robust intrinsic metric for diagnosing generative reliability.

The Inversion-Denoising Paradigm, which is based on diffusion models, excels in diverse image editing and restoration tasks. We revisit its mechanism and reveal a critical, overlooked factor in reconstruction degradation: the approximate noise error. This error stems from approximating the noise at step t with the prediction at step t-1, resulting in severe error accumulation throughout the inversion process. We introduce Projection-Orthogonal Least Squares for Robust and Adaptive Inversion (POLARIS), which reformulates inversion from an error-compensation problem into an error-origin problem. Rather than optimizing embeddings or latent codes to offset accumulated drift, POLARIS treats the guidance scale ω as a step-wise variable and derives a mathematically grounded formula to minimize inversion error at each step. Remarkably, POLARIS improves inversion latent quality with just one line of code. With negligible performance overhead, it substantially mitigates noise approximation errors and consistently improves the accuracy of downstream tasks.

We study series-level cinematic remaking, a long-horizon video-to-video generation problem that localizes full episodes or films via stylization or actor replacement while strictly preserving narrative structure, motion choreography, and character identity across hundreds of shots. Existing video generation and editing pipelines often break down in this regime due to compounding identity drift, background mutation, and semantic erosion under large camera motions and viewpoint changes. We propose Soap2Soap, a multi-agent framework that enforces long-term language-visual consistency through a Dual-Bridge Consistency mechanism: a scene-aware JSON screenplay serving as a persistent semantic backbone, and dynamically allocated visual reference anchors at both scene and shot levels. To suppress drift before video synthesis, we introduce batch keyframe consistency, jointly generating multiple keyframes in a shared latent context via a grid-based formulation. A closed-loop verification agent further audits identity, stability, and alignment to trigger selective regeneration. Experiments on SoapBench demonstrate strong improvements over commercial video generation APIs in long-term consistency and narrative fidelity.

A class of generative models that unifies flow-based and diffusion-based methods is introduced. These models extend the framework proposed in Albergo & Vanden-Eijnden (2023), enabling the use of a broad class of continuous-time stochastic processes called `stochastic interpolants' to bridge any two arbitrary probability density functions exactly in finite time. These interpolants are built by combining data from the two prescribed densities with an additional latent variable that shapes the bridge in a flexible way. The time-dependent probability density function of the stochastic interpolant is shown to satisfy a first-order transport equation as well as a family of forward and backward Fokker-Planck equations with tunable diffusion coefficient. Upon consideration of the time evolution of an individual sample, this viewpoint immediately leads to both deterministic and stochastic generative models based on probability flow equations or stochastic differential equations with an adjustable level of noise. The drift coefficients entering these models are time-dependent velocity fields characterized as the unique minimizers of simple quadratic objective functions, one of which is a new objective for the score of the interpolant density. We show that minimization of these quadratic objectives leads to control of the likelihood for generative models built upon stochastic dynamics, while likelihood control for deterministic dynamics is more stringent. We also discuss connections with other methods such as score-based diffusion models, stochastic localization processes, probabilistic denoising techniques, and rectifying flows. In addition, we demonstrate that stochastic interpolants recover the Schr\"odinger bridge between the two target densities when explicitly optimizing over the interpolant. Finally, algorithmic aspects are discussed and the approach is illustrated on numerical examples.

Social and collaborative platforms emit multivariate time-series traces in which early interactions-such as views, likes, or downloads-are followed, sometimes months or years later, by higher impact like citations, sales, or reviews. We formalize this setting as Lead-Lag Forecasting (LLF): given an early usage channel (the lead), predict a correlated but temporally shifted outcome channel (the lag). Despite the ubiquity of such patterns, LLF has not been treated as a unified forecasting problem within the time-series community, largely due to the absence of standardized datasets. To anchor research in LLF, here we present two high-volume benchmark datasets-arXiv (accesses -> citations of 2.3M papers) and GitHub (pushes/stars -> forks of 3M repositories)-and outline additional domains with analogous lead-lag dynamics, including Wikipedia (page views -> edits), Spotify (streams -> concert attendance), e-commerce (click-throughs -> purchases), and LinkedIn profile (views -> messages). Our datasets provide ideal testbeds for lead-lag forecasting, by capturing long-horizon dynamics across years, spanning the full spectrum of outcomes, and avoiding survivorship bias in sampling. We documented all technical details of data curation and cleaning, verified the presence of lead-lag dynamics through statistical and classification tests, and benchmarked parametric and non-parametric baselines for regression. Our study establishes LLF as a novel forecasting paradigm and lays an empirical foundation for its systematic exploration in social and usage data. Our data portal with downloads and documentation is available at https://lead-lag-forecasting.github.io/.

State-of-the-art embedding models are increasingly derived from decoder-only Large Language Model (LLM) backbones adapted via contrastive learning. Given the emergence of reasoning models trained via Reinforcement Learning with Verifiable Rewards (RLVR), a natural question arises: do enhanced reasoning translate to superior semantic representations when these models serve as embedding initializations? Contrary to expectation, our evaluation on MTEB and BRIGHT reveals a **null effect**: embedding models initialized from RLVR-tuned backbones yield no consistent performance advantage over their base counterparts when subjected to identical training recipes. To unpack this paradox, we introduce **H**ierarchical **R**epresentation **S**imilarity **A**nalysis (HRSA), a framework that decomposes similarity across representation, geometry, and function levels. HRSA reveals that while RLVR induces irreversible latent manifold's local geometry reorganization and reversible coordinate basis drift, it preserves the global manifold geometry and linear readout. Consequently, subsequent contrastive learning drives strong alignment between base- and reasoning-initialized models, a phenomenon we term **Manifold Realignment**. Empirically, our findings suggest that unlike Supervised Fine-Tuning (SFT), RLVR optimizes trajectories within an existing semantic landscape rather than fundamentally restructuring the landscape itself.

Evaluating persona-aligned empathy in LLM-based dialogue agents remains challenging. User states are latent, feedback is sparse and difficult to verify in situ, and seemingly supportive turns can still accumulate into trajectories that drift from persona-specific needs. We introduce EMPA, a process-oriented framework that evaluates persona-aligned support as sustained intervention rather than isolated replies. EMPA distills real interactions into controllable, psychologically grounded scenarios, couples them with an open-ended multi-agent sandbox that exposes strategic adaptation and failure modes, and scores trajectories in a latent psychological space by directional alignment, cumulative impact, and stability. The resulting signals and metrics support reproducible comparison and optimization of long-horizon empathic behavior, and they extend to other agent settings shaped by latent dynamics and weak, hard-to-verify feedback.

Risk decision systems in fraud detection and credit scoring operate under structural label absence: ground truth arrives weeks to months after decisions are made. During this blind period, model performance may degrade silently, eroding the governance evidence that justifies automated decisions. Existing drift detection methods either require labels (supervised detectors) or detect statistical change without distinguishing harmful degradation from benign distributional evolution (unsupervised detectors). No existing framework integrates drift detection with governance evidence assessment and operational response. This paper presents a label-free governance monitoring extension to the Governance Drift Toolkit that produces governance alerts rather than statistical alarms. The monitoring architecture applies composite multi-proxy monitoring across four proxy monitors (score distribution, feature drift, prediction entropy, confidence distribution), with governance-calibrated thresholds. Empirical evaluation on the Lending Club credit scoring dataset (1.37M loans, 11 years) demonstrates three findings. First, raw proxy metrics (Feature PSI delta up to 1.84, Score PSI delta up to 0.92) distinguish injected covariate degradation from natural temporal drift in an offline evaluation setting. Second, pure concept drift in P(Y|X) produces exactly zero delta across all proxy metrics in all windows, confirming the irreducible blind spot of label-free monitoring as a structural verification. Third, the composite score provides monotonic severity progression as more monitors trigger (0.583 to 0.833 to 1.000), enabling graduated governance response. Cross-domain comparison with IEEE-CIS fraud detection results shows the detectable/undetectable boundary is consistent across both domains. The toolkit and evaluation code are available as open-source artifacts.

In nonstationary bandit learning problems, the decision-maker must continually gather information and adapt their action selection as the latent state of the environment evolves. In each time period, some latent optimal action maximizes expected reward under the environment state. We view the optimal action sequence as a stochastic process, and take an information-theoretic approach to analyze attainable performance. We bound limiting per-period regret in terms of the entropy rate of the optimal action process. The bound applies to a wide array of problems studied in the literature and reflects the problem's information structure through its information-ratio.

Standard next-token prediction (NTP) supervises language models solely through discrete labels in the output logit space. We argue that this sparse one-hot supervision leaves the latent representation space under-constrained, allowing hidden states to drift into degenerate and anisotropic configurations that can limit generalization. To address this issue, we propose Next Implicit Token Prediction (NITP), which augments discrete prediction with dense continuous supervision directly in the representation space. NITP trains the model to predict the implicit semantic content of the next token, using shallow-layer representations from the same model as stable self-supervised targets. We provide theoretical analysis showing that NITP regularizes the optimization landscape by mitigating under-constrained degrees of freedom and encouraging a compact, structured representation geometry. Empirically, across dense and MoE models ranging from 0.5B to 9B parameters, NITP consistently improves downstream performance with negligible computational overhead. On a 9B MoE model, NITP achieves a 5.7% absolute improvement on MMLU-Pro, along with gains of 6.4% on C3 and 4.3% on CommonsenseQA, with approximately 2% additional training FLOPs and no additional inference cost. Our implementation is available at https://github.com/aHapBean/NITP.

Reconstructing dynamic 3D scenes with photorealistic detail and strong temporal coherence remains a significant challenge. Existing Gaussian splatting approaches for dynamic scene modeling often rely on per-frame optimization, which can overfit to instantaneous states instead of capturing underlying motion dynamics. To address this, we present Mango-GS, a multi-frame, node-guided framework for high-fidelity 4D reconstruction. Mango-GS leverages a temporal Transformer to model motion dependencies within a short window of frames, producing temporally consistent deformations. For efficiency, temporal modeling is confined to a sparse set of control nodes. Each node is represented by a decoupled canonical position and a latent code, providing a stable semantic anchor for motion propagation and preventing correspondence drift under large motion. Our framework is trained end-to-end, enhanced by an input masking strategy and two multi-frame losses to improve robustness. Extensive experiments demonstrate that Mango-GS achieves state-of-the-art reconstruction quality and real-time rendering speed, enabling high-fidelity reconstruction and interactive rendering of dynamic scenes.

The prevailing inference framework for diffusion models formulates generation fundamentally as a problem of numerical integration. This perspective casts the model as an exact estimator, neglecting the inherent statistical uncertainty of the denoising process. In this work, we propose Forward-Process Aligned Diffusion prediction (DiFA), a training-free framework that reframes inference-time data prediction refinement as a sequential state estimation problem. Rather than reusing past outputs solely for numerical integration, DiFA treats iterative data predictions along the reverse trajectory as correlated observations to build a forward-aligned temporal consensus. Inspired by Kalman filtering, this consensus aggregates historical predictions according to structural consistency and noise-level compatibility. To counteract the over-smoothing tendency of temporal consensus, we introduce a deviation guidance mechanism to adaptively preserve residual details. Empirically, DiFA yields significant improvements on CIFAR-10 and ImageNet across the evaluated metrics, including FID, IS, and FD-DINOv2, demonstrating that aligning inference with the forward statistical structure substantially improves generative fidelity.

Behavior-cloned diffusion policies are expressive but remain vulnerable to covariate shift: small deviations from demonstrated states can compound into task failure. Existing methods address this either by expanding the training distribution through expert corrections or synthetic augmentation, or by steering a frozen policy at test time with guidance from a learned model. The former can be expensive or assumption-dependent, while the latter discards the corrected trajectories after execution. We introduce ReGuide, a self-improving framework that treats guided rollouts as reusable on-policy recovery data. ReGuide first uses Phase-Conditioned Guidance (PCG) to generate corrective rollouts: it constructs phase-specific latent targets, applies guidance only in the drifted-but-recoverable regime, and guides through the estimated clean action to match the dynamics model's training distribution. Successful guided rollouts are then absorbed back into the policy through ReGuide-FT, which fine-tunes the current checkpoint, or ReGuide-FS, which retrains from scratch on the augmented dataset; the two can also be composed and iterated. On Robomimic Can, Square, Transport, and Tool Hang, ReGuide improves base-policy success by 1.3--7.7times, outperforms LPB in the test-time-only setting, and matched-data ablations show that the gains come from guided recovery data rather than additional rollouts alone.

This work introduces MotionLCM, extending controllable motion generation to a real-time level. Existing methods for spatial control in text-conditioned motion generation suffer from significant runtime inefficiency. To address this issue, we first propose the motion latent consistency model (MotionLCM) for motion generation, building upon the latent diffusion model (MLD). By employing one-step (or few-step) inference, we further improve the runtime efficiency of the motion latent diffusion model for motion generation. To ensure effective controllability, we incorporate a motion ControlNet within the latent space of MotionLCM and enable explicit control signals (e.g., pelvis trajectory) in the vanilla motion space to control the generation process directly, similar to controlling other latent-free diffusion models for motion generation. By employing these techniques, our approach can generate human motions with text and control signals in real-time. Experimental results demonstrate the remarkable generation and controlling capabilities of MotionLCM while maintaining real-time runtime efficiency.

Strong reasoning depends not only on model knowledge but also on how effectively cognitive behaviors are deployed during generation. Existing methods often rely on explicit behavior-level control, making them insufficiently adaptive when failures and required corrections vary across reasoning states, tasks, and models. To this end, we propose Latent Reward Steering (LRS), an adaptive inference-time framework that promotes cognitive behaviors by optimizing the sparse-autoencoder (SAE) latent states that implicitly carry them. Rather than relying on predefined cognitive behaviors or steering directions derived from them, LRS trains a latent reward model on reasoning traces by final answer correctness to estimate the quality of intermediate latent states. During inference, reward gradients provide state-specific correction directions for fragile latent states, while a reward and confidence gate restricts intervention to states the reward signal flags as fragile. Experiments on multiple reasoning LLM backbones and benchmarks show that \ours consistently improves performance over various baselines, and post-hoc analyses further indicate that \ours implicitly promotes good cognitive behaviors that fix the original reasoning errors. Code is available at: https://github.com/jiakanglee/Latent-Reward-Steering.

This study introduces PV-RNN, a novel variational RNN inspired by the predictive-coding ideas. The model learns to extract the probabilistic structures hidden in fluctuating temporal patterns by dynamically changing the stochasticity of its latent states. Its architecture attempts to address two major concerns of variational Bayes RNNs: how can latent variables learn meaningful representations and how can the inference model transfer future observations to the latent variables. PV-RNN does both by introducing adaptive vectors mirroring the training data, whose values can then be adapted differently during evaluation. Moreover, prediction errors during backpropagation, rather than external inputs during the forward computation, are used to convey information to the network about the external data. For testing, we introduce error regression for predicting unseen sequences as inspired by predictive coding that leverages those mechanisms. The model introduces a weighting parameter, the meta-prior, to balance the optimization pressure placed on two terms of a lower bound on the marginal likelihood of the sequential data. We test the model on two datasets with probabilistic structures and show that with high values of the meta-prior the network develops deterministic chaos through which the data's randomness is imitated. For low values, the model behaves as a random process. The network performs best on intermediate values, and is able to capture the latent probabilistic structure with good generalization. Analyzing the meta-prior's impact on the network allows to precisely study the theoretical value and practical benefits of incorporating stochastic dynamics in our model. We demonstrate better prediction performance on a robot imitation task with our model using error regression compared to a standard variational Bayes model lacking such a procedure.

Preference optimization for diffusion models aims to align them with human preferences for images. Previous methods typically leverage Vision-Language Models (VLMs) as pixel-level reward models to approximate human preferences. However, when used for step-level preference optimization, these models face challenges in handling noisy images of different timesteps and require complex transformations into pixel space. In this work, we demonstrate that diffusion models are inherently well-suited for step-level reward modeling in the latent space, as they can naturally extract features from noisy latent images. Accordingly, we propose the Latent Reward Model (LRM), which repurposes components of diffusion models to predict preferences of latent images at various timesteps. Building on LRM, we introduce Latent Preference Optimization (LPO), a method designed for step-level preference optimization directly in the latent space. Experimental results indicate that LPO not only significantly enhances performance in aligning diffusion models with general, aesthetic, and text-image alignment preferences, but also achieves 2.5-28times training speedup compared to existing preference optimization methods. Our code will be available at https://github.com/casiatao/LPO.

Current diffusion models for audio-driven avatar video generation struggle to synthesize long videos with natural audio synchronization and identity consistency. This paper presents StableAvatar, the first end-to-end video diffusion transformer that synthesizes infinite-length high-quality videos without post-processing. Conditioned on a reference image and audio, StableAvatar integrates tailored training and inference modules to enable infinite-length video generation. We observe that the main reason preventing existing models from generating long videos lies in their audio modeling. They typically rely on third-party off-the-shelf extractors to obtain audio embeddings, which are then directly injected into the diffusion model via cross-attention. Since current diffusion backbones lack any audio-related priors, this approach causes severe latent distribution error accumulation across video clips, leading the latent distribution of subsequent segments to drift away from the optimal distribution gradually. To address this, StableAvatar introduces a novel Time-step-aware Audio Adapter that prevents error accumulation via time-step-aware modulation. During inference, we propose a novel Audio Native Guidance Mechanism to further enhance the audio synchronization by leveraging the diffusion's own evolving joint audio-latent prediction as a dynamic guidance signal. To enhance the smoothness of the infinite-length videos, we introduce a Dynamic Weighted Sliding-window Strategy that fuses latent over time. Experiments on benchmarks show the effectiveness of StableAvatar both qualitatively and quantitatively.

Event cameras offer multiple advantages in monocular egocentric 3D human pose estimation from head-mounted devices, such as millisecond temporal resolution, high dynamic range, and negligible motion blur. Existing methods effectively leverage these properties, but suffer from low 3D estimation accuracy, insufficient in many applications (e.g., immersive VR/AR). This is due to the design not being fully tailored towards event streams (e.g., their asynchronous and continuous nature), leading to high sensitivity to self-occlusions and temporal jitter in the estimates. This paper rethinks the setting and introduces E-3DPSM, an event-driven continuous pose state machine for event-based egocentric 3D human pose estimation. E-3DPSM aligns continuous human motion with fine-grained event dynamics; it evolves latent states and predicts continuous changes in 3D joint positions associated with observed events, which are fused with direct 3D human pose predictions, leading to stable and drift-free final 3D pose reconstructions. E-3DPSM runs in real-time at 80 Hz on a single workstation and sets a new state of the art in experiments on two benchmarks, improving accuracy by up to 19% (MPJPE) and temporal stability by up to 2.7x. See our project page for the source code and trained models.

Extracellular recordings are transient voltage fluctuations in the vicinity of neurons, serving as a fundamental modality in neuroscience for decoding brain activity at single-neuron resolution. Spike sorting, the process of attributing each detected spike to its corresponding neuron, is a pivotal step in brain sensing pipelines. However, it remains challenging under low signal-to-noise ratio (SNR), electrode drift and cross-session variability. In this paper, we propose HuiduRep, a robust self-supervised representation learning framework that extracts discriminative and generalizable features from extracellular recordings. By integrating contrastive learning with a denoising autoencoder, HuiduRep learns latent representations that are robust to noise and drift. With HuiduRep, we develop a spike sorting pipeline that clusters spike representations without ground truth labels. Experiments on hybrid and real-world datasets demonstrate that HuiduRep achieves strong robustness. Furthermore, the pipeline outperforms state-of-the-art tools such as KiloSort4 and MountainSort5. These findings demonstrate the potential of self-supervised spike representation learning as a foundational tool for robust and generalizable processing of extracellular recordings. Code is available at: https://github.com/IgarashiAkatuki/HuiduRep

Generative 3D Painting is among the top productivity boosters in high-resolution 3D asset management and recycling. Ever since text-to-image models became accessible for inference on consumer hardware, the performance of 3D Painting methods has consistently improved and is currently close to plateauing. At the core of most such models lies denoising diffusion in the latent space, an inherently time-consuming iterative process. Multiple techniques have been developed recently to accelerate generation and reduce sampling iterations by orders of magnitude. Designed for 2D generative imaging, these techniques do not come with recipes for lifting them into 3D. In this paper, we address this shortcoming by proposing a Latent Consistency Model (LCM) adaptation for the task at hand. We analyze the strengths and weaknesses of the proposed model and evaluate it quantitatively and qualitatively. Based on the Objaverse dataset samples study, our 3D painting method attains strong preference in all evaluations. Source code is available at https://github.com/kongdai123/consistency2.

Large language models (LLMs) are being rapidly integrated into decision-support tools, automation workflows, and AI-enabled software systems. However, their behavior in production environments remains poorly understood, and their failure patterns differ fundamentally from those of traditional machine learning models. This paper presents a system-level taxonomy of fifteen hidden failure modes that arise in real-world LLM applications, including multi-step reasoning drift, latent inconsistency, context-boundary degradation, incorrect tool invocation, version drift, and cost-driven performance collapse. Using this taxonomy, we analyze the growing gap in evaluation and monitoring practices: existing benchmarks measure knowledge or reasoning but provide little insight into stability, reproducibility, drift, or workflow integration. We further examine the production challenges associated with deploying LLMs - including observability limitations, cost constraints, and update-induced regressions - and outline high-level design principles for building reliable, maintainable, and cost-aware LLM systems. Finally, we outline high-level design principles for building reliable, maintainable, and cost-aware LLM-based systems. By framing LLM reliability as a system-engineering problem rather than a purely model-centric one, this work provides an analytical foundation for future research on evaluation methodology, AI system robustness, and dependable LLM deployment.

Flow matching over carefully designed latent representations has recently emerged as a powerful paradigm for topology-aware mesh generation. Existing approaches, however, model vertices and connectivity jointly in a joint latent space, entangling continuous vertex geometry with discrete combinatorial structure; this complicates flow learning and manifests as drifting vertices and broken surfaces. We present LATO.2, a factorized flow matching framework that decomposes mesh generation into a vertex flow followed by a connectivity flow conditioned on the realized vertices, with both stages anchored to a shared coarse voxel scaffold. Dedicated VAEs underpin the two stages, recovering vertices at sub-voxel precision and embedding discrete connectivity into a continuous latent space. We demonstrate two advantages unique to this factorization: (i) part-wise generation, in which the scaffold is partitioned and each part synthesized at full latent capacity, yielding substantially higher-resolution meshes than a monolithic latent permits; and (ii) topology-adaptive editing, in which manipulating first-stage vertices induces the corresponding connectivity without re-optimization. Experiments show that LATO.2 surpasses state-of-the-art topology-aware mesh generators in geometric fidelity and connectivity quality.

Diffusion models have achieved remarkable success as generative models. However, even a well-trained model can accumulate errors throughout the generation process. These errors become particularly problematic when arbitrary guidance is applied to steer samples toward desired properties, which often breaks sample fidelity. In this paper, we propose a general solution to address the off-manifold phenomenon observed in diffusion models. Our approach leverages a time predictor to estimate deviations from the desired data manifold at each timestep, identifying that a larger time gap is associated with reduced generation quality. We then design a novel guidance mechanism, `Temporal Alignment Guidance' (TAG), attracting the samples back to the desired manifold at every timestep during generation. Through extensive experiments, we demonstrate that TAG consistently produces samples closely aligned with the desired manifold at each timestep, leading to significant improvements in generation quality across various downstream tasks.